Commit 90b0f71d62df ("hwmon: (pmbus/max16601) Determine and use number of
populated phases") adjusts content in the table of
./Documentation/hwmon/max16601.rst, but one row went beyond the column's
length.
Hence, make htmldocs warns:
Documentation/hwmon/max16601.rst:94: WARNING: Malformed table.
Adjust the column length of that table for this longer row to fit.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
---
applies cleanly on next-20210129
Guenter, please pick this minor fixup for your hwmon-next tree.
Documentation/hwmon/max16601.rst | 143 +++++++++++++++----------------
1 file changed, 71 insertions(+), 72 deletions(-)
diff --git a/Documentation/hwmon/max16601.rst b/Documentation/hwmon/max16601.rst
index d16792be7533..d265a2224354 100644
--- a/Documentation/hwmon/max16601.rst
+++ b/Documentation/hwmon/max16601.rst
@@ -53,75 +53,74 @@ Sysfs entries
The following attributes are supported.
-======================= =======================================================
-in1_label "vin1"
-in1_input VCORE input voltage.
-in1_alarm Input voltage alarm.
-
-in2_label "vout1"
-in2_input VCORE output voltage.
-in2_alarm Output voltage alarm.
-
-curr1_label "iin1"
-curr1_input VCORE input current, derived from duty cycle and output
- current.
-curr1_max Maximum input current.
-curr1_max_alarm Current high alarm.
-
-curr[P+2]_label "iin1.P"
-curr[P+2]_input VCORE phase P input current.
-
-curr[N+2]_label "iin2"
-curr[N+2]_input VCORE input current, derived from sensor element.
- 'N' is the number of enabled/populated phases.
-
-curr[N+3]_label "iin3"
-curr[N+3]_input VSA input current.
-
-curr[N+4]_label "iout1"
-curr[N+4]_input VCORE output current.
-curr[N+4]_crit Critical output current.
-curr[N+4]_crit_alarm Output current critical alarm.
-curr[N+4]_max Maximum output current.
-curr[N+4]_max_alarm Output current high alarm.
-
-curr[N+P+5]_label "iout1.P"
-curr[N+P+5]_input VCORE phase P output current.
-
-curr[2*N+5]_label "iout3"
-curr[2*N+5]_input VSA output current.
-curr[2*N+5]_highest Historical maximum VSA output current.
-curr[2*N+5]_reset_history
- Write any value to reset curr21_highest.
-curr[2*N+5]_crit Critical output current.
-curr[2*N+5]_crit_alarm Output current critical alarm.
-curr[2*N+5]_max Maximum output current.
-curr[2*N+5]_max_alarm Output current high alarm.
-
-power1_label "pin1"
-power1_input Input power, derived from duty cycle and output current.
-power1_alarm Input power alarm.
-
-power2_label "pin2"
-power2_input Input power, derived from input current sensor.
-
-power3_label "pout"
-power3_input Output power.
-
-temp1_input VCORE temperature.
-temp1_crit Critical high temperature.
-temp1_crit_alarm Chip temperature critical high alarm.
-temp1_max Maximum temperature.
-temp1_max_alarm Chip temperature high alarm.
-
-temp2_input TSENSE_0 temperature
-temp3_input TSENSE_1 temperature
-temp4_input TSENSE_2 temperature
-temp5_input TSENSE_3 temperature
-
-temp6_input VSA temperature.
-temp6_crit Critical high temperature.
-temp6_crit_alarm Chip temperature critical high alarm.
-temp6_max Maximum temperature.
-temp6_max_alarm Chip temperature high alarm.
-======================= =======================================================
+========================= =======================================================
+in1_label "vin1"
+in1_input VCORE input voltage.
+in1_alarm Input voltage alarm.
+
+in2_label "vout1"
+in2_input VCORE output voltage.
+in2_alarm Output voltage alarm.
+
+curr1_label "iin1"
+curr1_input VCORE input current, derived from duty cycle and output
+ current.
+curr1_max Maximum input current.
+curr1_max_alarm Current high alarm.
+
+curr[P+2]_label "iin1.P"
+curr[P+2]_input VCORE phase P input current.
+
+curr[N+2]_label "iin2"
+curr[N+2]_input VCORE input current, derived from sensor element.
+ 'N' is the number of enabled/populated phases.
+
+curr[N+3]_label "iin3"
+curr[N+3]_input VSA input current.
+
+curr[N+4]_label "iout1"
+curr[N+4]_input VCORE output current.
+curr[N+4]_crit Critical output current.
+curr[N+4]_crit_alarm Output current critical alarm.
+curr[N+4]_max Maximum output current.
+curr[N+4]_max_alarm Output current high alarm.
+
+curr[N+P+5]_label "iout1.P"
+curr[N+P+5]_input VCORE phase P output current.
+
+curr[2*N+5]_label "iout3"
+curr[2*N+5]_input VSA output current.
+curr[2*N+5]_highest Historical maximum VSA output current.
+curr[2*N+5]_reset_history Write any value to reset curr21_highest.
+curr[2*N+5]_crit Critical output current.
+curr[2*N+5]_crit_alarm Output current critical alarm.
+curr[2*N+5]_max Maximum output current.
+curr[2*N+5]_max_alarm Output current high alarm.
+
+power1_label "pin1"
+power1_input Input power, derived from duty cycle and output current.
+power1_alarm Input power alarm.
+
+power2_label "pin2"
+power2_input Input power, derived from input current sensor.
+
+power3_label "pout"
+power3_input Output power.
+
+temp1_input VCORE temperature.
+temp1_crit Critical high temperature.
+temp1_crit_alarm Chip temperature critical high alarm.
+temp1_max Maximum temperature.
+temp1_max_alarm Chip temperature high alarm.
+
+temp2_input TSENSE_0 temperature
+temp3_input TSENSE_1 temperature
+temp4_input TSENSE_2 temperature
+temp5_input TSENSE_3 temperature
+
+temp6_input VSA temperature.
+temp6_crit Critical high temperature.
+temp6_crit_alarm Chip temperature critical high alarm.
+temp6_max Maximum temperature.
+temp6_max_alarm Chip temperature high alarm.
+========================= =======================================================
--
2.17.1
