Re: [PATCH v3 0/9] Add support for Microsoft Surface System Aggregator Module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 12/21/20 7:39 PM, Maximilian Luz wrote:
> Hello,
> 
> Here is version three of the Surface System Aggregator Module (SAM/SSAM)
> driver series, adding initial support for the embedded controller on 5th
> and later generation Microsoft Surface devices. Initial support includes
> the ACPI interface to the controller, via which battery and thermal
> information is provided on some of these devices.
> 
> The first version and cover letter detailing what this series is about
> can be found at
> 
>   https://lore.kernel.org/platform-driver-x86/20201115192143.21571-1-luzmaximilian@xxxxxxxxx/
> 
> the previous version (v2) at
> 
>   https://lore.kernel.org/platform-driver-x86/20201203212640.663931-1-luzmaximilian@xxxxxxxxx/
> 
> This patch-set can also be found at the following repository and
> reference, if you prefer to look at a kernel tree instead of these
> emails:
> 
>   https://github.com/linux-surface/kernel tags/s/surface-aggregator/v3
> 
> Thank you all for the feedback to and reviews of the previous versions,
> I hope I have addressed all comments.

Thank you for your patch-series, I've applied the series to my
review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

This has been applied on top of:
"platform/surface: SURFACE_PLATFORMS should depend on ACPI"

As requested. Since my review-hans branch has been fast-forwarded to 5.11-rc1
there where some conflicts:

6/9 "platform/surface: aggregator: Add dedicated bus and device type" had conflicts in:
scripts/mod/devicetable-offsets.c
scripts/mod/file2alias.c

8/9 "platform/surface: Add Surface Aggregator user-space interface" had a conflict in:
Documentation/userspace-api/ioctl/ioctl-number.rst

This conflict was caused by the addition of documentation of the sgx ioctls, these use
0xA4 as "Code" byte (shared with uapi/linux/tee.h), so the 0xA5 code for the sam cdev
ioctl is still unique.

I'm pretty sure that I've properly resolved the conflicts, but please double-check.

Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.

Regards,

Hans




> Note: In v3, I have dropped the explicit dependency of the core module
> and driver on CONFIG_ACPI due to the incoming
> 
>   [PATCH] platform/surface: SURFACE_PLATFORMS should depend on ACPI
> 
> Thus, this series depends on said patch. This patch can be found at
> 
>   https://www.spinics.net/lists/platform-driver-x86/msg23929.html
> 
> 
> Changes in v1 (from RFC, overview):
>  - move to platform/surface
>  - add copyright lines
>  - change SPDX identifier to GPL-2.0+ (was GPL-2.0-or-later)
>  - change user-space interface from debugfs to misc-device
>  - address issues in user-space interface
>  - fix typos in commit messages and documentation
>  - fix some bugs, address other issues
> 
> Changes in v2 (overview):
>  - simplify some code, mostly with regards to concurrency
>  - add architectural overview to documentation
>  - improve comments for documentation
>  - use printk specifier for hex prefix instead of hard-coding it
>  - spell check comments and strings, fix typos
>  - unify comment style
>  - run checkpatch --strict, fix these and other style issues
> 
> Changes in v3 (overview):
>  - remove explicit dependency on ACPI as this is going to be covered by
>    CONFIG_SURFACE_PLATFORMS
>  - simplify locking requirements
>  - help enforce locking requirements via lockdep assertions
>  - fix false-positive lockdep warning
>  - warn on event enablement reference counter exhaustion
>  - don't warn about unhandled event if event handling failed
>  - validate flags on request initialization
>  - improve documentation/add comments
>  - replace 'iff' with 'if' in documentation and comments
> 
> Changes regarding specific patches (and more details) can be found on
> the individual patch.
> 
> 
> Maximilian Luz (9):
>   platform/surface: Add Surface Aggregator subsystem
>   platform/surface: aggregator: Add control packet allocation caching
>   platform/surface: aggregator: Add event item allocation caching
>   platform/surface: aggregator: Add trace points
>   platform/surface: aggregator: Add error injection capabilities
>   platform/surface: aggregator: Add dedicated bus and device type
>   docs: driver-api: Add Surface Aggregator subsystem documentation
>   platform/surface: Add Surface Aggregator user-space interface
>   platform/surface: Add Surface ACPI Notify driver
> 
>  Documentation/driver-api/index.rst            |    1 +
>  .../surface_aggregator/client-api.rst         |   38 +
>  .../driver-api/surface_aggregator/client.rst  |  393 +++
>  .../surface_aggregator/clients/cdev.rst       |   87 +
>  .../surface_aggregator/clients/index.rst      |   21 +
>  .../surface_aggregator/clients/san.rst        |   44 +
>  .../driver-api/surface_aggregator/index.rst   |   21 +
>  .../surface_aggregator/internal-api.rst       |   67 +
>  .../surface_aggregator/internal.rst           |  577 ++++
>  .../surface_aggregator/overview.rst           |   77 +
>  .../driver-api/surface_aggregator/ssh.rst     |  344 +++
>  .../userspace-api/ioctl/ioctl-number.rst      |    2 +
>  MAINTAINERS                                   |   13 +
>  drivers/platform/surface/Kconfig              |   38 +
>  drivers/platform/surface/Makefile             |    3 +
>  drivers/platform/surface/aggregator/Kconfig   |   68 +
>  drivers/platform/surface/aggregator/Makefile  |   17 +
>  drivers/platform/surface/aggregator/bus.c     |  415 +++
>  drivers/platform/surface/aggregator/bus.h     |   27 +
>  .../platform/surface/aggregator/controller.c  | 2579 +++++++++++++++++
>  .../platform/surface/aggregator/controller.h  |  285 ++
>  drivers/platform/surface/aggregator/core.c    |  839 ++++++
>  .../platform/surface/aggregator/ssh_msgb.h    |  205 ++
>  .../surface/aggregator/ssh_packet_layer.c     | 2057 +++++++++++++
>  .../surface/aggregator/ssh_packet_layer.h     |  190 ++
>  .../platform/surface/aggregator/ssh_parser.c  |  228 ++
>  .../platform/surface/aggregator/ssh_parser.h  |  154 +
>  .../surface/aggregator/ssh_request_layer.c    | 1264 ++++++++
>  .../surface/aggregator/ssh_request_layer.h    |  143 +
>  drivers/platform/surface/aggregator/trace.h   |  632 ++++
>  .../platform/surface/surface_acpi_notify.c    |  886 ++++++
>  .../surface/surface_aggregator_cdev.c         |  303 ++
>  include/linux/mod_devicetable.h               |   18 +
>  include/linux/surface_acpi_notify.h           |   39 +
>  include/linux/surface_aggregator/controller.h |  824 ++++++
>  include/linux/surface_aggregator/device.h     |  423 +++
>  include/linux/surface_aggregator/serial_hub.h |  672 +++++
>  include/uapi/linux/surface_aggregator/cdev.h  |   78 +
>  scripts/mod/devicetable-offsets.c             |    8 +
>  scripts/mod/file2alias.c                      |   23 +
>  40 files changed, 14103 insertions(+)
>  create mode 100644 Documentation/driver-api/surface_aggregator/client-api.rst
>  create mode 100644 Documentation/driver-api/surface_aggregator/client.rst
>  create mode 100644 Documentation/driver-api/surface_aggregator/clients/cdev.rst
>  create mode 100644 Documentation/driver-api/surface_aggregator/clients/index.rst
>  create mode 100644 Documentation/driver-api/surface_aggregator/clients/san.rst
>  create mode 100644 Documentation/driver-api/surface_aggregator/index.rst
>  create mode 100644 Documentation/driver-api/surface_aggregator/internal-api.rst
>  create mode 100644 Documentation/driver-api/surface_aggregator/internal.rst
>  create mode 100644 Documentation/driver-api/surface_aggregator/overview.rst
>  create mode 100644 Documentation/driver-api/surface_aggregator/ssh.rst
>  create mode 100644 drivers/platform/surface/aggregator/Kconfig
>  create mode 100644 drivers/platform/surface/aggregator/Makefile
>  create mode 100644 drivers/platform/surface/aggregator/bus.c
>  create mode 100644 drivers/platform/surface/aggregator/bus.h
>  create mode 100644 drivers/platform/surface/aggregator/controller.c
>  create mode 100644 drivers/platform/surface/aggregator/controller.h
>  create mode 100644 drivers/platform/surface/aggregator/core.c
>  create mode 100644 drivers/platform/surface/aggregator/ssh_msgb.h
>  create mode 100644 drivers/platform/surface/aggregator/ssh_packet_layer.c
>  create mode 100644 drivers/platform/surface/aggregator/ssh_packet_layer.h
>  create mode 100644 drivers/platform/surface/aggregator/ssh_parser.c
>  create mode 100644 drivers/platform/surface/aggregator/ssh_parser.h
>  create mode 100644 drivers/platform/surface/aggregator/ssh_request_layer.c
>  create mode 100644 drivers/platform/surface/aggregator/ssh_request_layer.h
>  create mode 100644 drivers/platform/surface/aggregator/trace.h
>  create mode 100644 drivers/platform/surface/surface_acpi_notify.c
>  create mode 100644 drivers/platform/surface/surface_aggregator_cdev.c
>  create mode 100644 include/linux/surface_acpi_notify.h
>  create mode 100644 include/linux/surface_aggregator/controller.h
>  create mode 100644 include/linux/surface_aggregator/device.h
>  create mode 100644 include/linux/surface_aggregator/serial_hub.h
>  create mode 100644 include/uapi/linux/surface_aggregator/cdev.h
> 





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux