Some functions have different names between their prototypes
and the kernel-doc markup.
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
drivers/net/phy/mdio_bus.c | 2 +-
drivers/net/phy/phy-c45.c | 2 +-
drivers/net/phy/phy.c | 2 +-
drivers/net/phy/phy_device.c | 2 +-
drivers/net/phy/phylink.c | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 757e950fb745..e59067c64e97 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -455,41 +455,41 @@ static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
addr = of_mdio_parse_addr(dev, child);
if (addr < 0)
continue;
if (addr == mdiodev->addr) {
dev->of_node = child;
dev->fwnode = of_fwnode_handle(child);
return;
}
}
}
#else /* !IS_ENABLED(CONFIG_OF_MDIO) */
static inline void of_mdiobus_link_mdiodev(struct mii_bus *mdio,
struct mdio_device *mdiodev)
{
}
#endif
/**
- * mdiobus_create_device_from_board_info - create a full MDIO device given
+ * mdiobus_create_device - create a full MDIO device given
* a mdio_board_info structure
* @bus: MDIO bus to create the devices on
* @bi: mdio_board_info structure describing the devices
*
* Returns 0 on success or < 0 on error.
*/
static int mdiobus_create_device(struct mii_bus *bus,
struct mdio_board_info *bi)
{
struct mdio_device *mdiodev;
int ret = 0;
mdiodev = mdio_device_create(bus, bi->mdio_addr);
if (IS_ERR(mdiodev))
return -ENODEV;
strncpy(mdiodev->modalias, bi->modalias,
sizeof(mdiodev->modalias));
mdiodev->bus_match = mdio_device_bus_match;
mdiodev->dev.platform_data = (void *)bi->platform_data;
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index bd11e62bfdfe..077f2929c45e 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -1,32 +1,32 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Clause 45 PHY support
*/
#include <linux/ethtool.h>
#include <linux/export.h>
#include <linux/mdio.h>
#include <linux/mii.h>
#include <linux/phy.h>
/**
- * genphy_c45_setup_forced - configures a forced speed
+ * genphy_c45_pma_setup_forced - configures a forced speed
* @phydev: target phy_device struct
*/
int genphy_c45_pma_setup_forced(struct phy_device *phydev)
{
int ctrl1, ctrl2, ret;
/* Half duplex is not supported */
if (phydev->duplex != DUPLEX_FULL)
return -EINVAL;
ctrl1 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
if (ctrl1 < 0)
return ctrl1;
ctrl2 = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL2);
if (ctrl2 < 0)
return ctrl2;
ctrl1 &= ~MDIO_CTRL1_SPEEDSEL;
/*
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 477bdf2f94df..dce86bad8231 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -472,41 +472,41 @@ int phy_do_ioctl_running(struct net_device *dev, struct ifreq *ifr, int cmd)
return -ENODEV;
return phy_do_ioctl(dev, ifr, cmd);
}
EXPORT_SYMBOL(phy_do_ioctl_running);
/**
* phy_queue_state_machine - Trigger the state machine to run soon
*
* @phydev: the phy_device struct
* @jiffies: Run the state machine after these jiffies
*/
void phy_queue_state_machine(struct phy_device *phydev, unsigned long jiffies)
{
mod_delayed_work(system_power_efficient_wq, &phydev->state_queue,
jiffies);
}
EXPORT_SYMBOL(phy_queue_state_machine);
/**
- * phy_queue_state_machine - Trigger the state machine to run now
+ * phy_trigger_machine - Trigger the state machine to run now
*
* @phydev: the phy_device struct
*/
void phy_trigger_machine(struct phy_device *phydev)
{
phy_queue_state_machine(phydev, 0);
}
EXPORT_SYMBOL(phy_trigger_machine);
static void phy_abort_cable_test(struct phy_device *phydev)
{
int err;
ethnl_cable_test_finished(phydev);
err = phy_init_hw(phydev);
if (err)
phydev_err(phydev, "Error while aborting cable test");
}
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e13a46c25437..8f34bedceadc 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2731,41 +2731,41 @@ EXPORT_SYMBOL(phy_get_pause);
#if IS_ENABLED(CONFIG_OF_MDIO)
static int phy_get_int_delay_property(struct device *dev, const char *name)
{
s32 int_delay;
int ret;
ret = device_property_read_u32(dev, name, &int_delay);
if (ret)
return ret;
return int_delay;
}
#else
static int phy_get_int_delay_property(struct device *dev, const char *name)
{
return -EINVAL;
}
#endif
/**
- * phy_get_delay_index - returns the index of the internal delay
+ * phy_get_internal_delay - returns the index of the internal delay
* @phydev: phy_device struct
* @dev: pointer to the devices device struct
* @delay_values: array of delays the PHY supports
* @size: the size of the delay array
* @is_rx: boolean to indicate to get the rx internal delay
*
* Returns the index within the array of internal delay passed in.
* If the device property is not present then the interface type is checked
* if the interface defines use of internal delay then a 1 is returned otherwise
* a 0 is returned.
* The array must be in ascending order. If PHY does not have an ascending order
* array then size = 0 and the value of the delay property is returned.
* Return -EINVAL if the delay is invalid or cannot be found.
*/
s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev,
const int *delay_values, int size, bool is_rx)
{
s32 delay;
int i;
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 5d8c015bc9f2..84f6e197f965 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1632,41 +1632,41 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
* we can't hold our state mutex while calling phy_set_asym_pause().
*/
if (pl->phydev)
phy_set_asym_pause(pl->phydev, pause->rx_pause,
pause->tx_pause);
/* If the manual pause settings changed, make sure we trigger a
* resolve to update their state; we can not guarantee that the
* link will cycle.
*/
if (manual_changed) {
pl->mac_link_dropped = true;
phylink_run_resolve(pl);
}
return 0;
}
EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam);
/**
- * phylink_ethtool_get_eee_err() - read the energy efficient ethernet error
+ * phylink_get_eee_err() - read the energy efficient ethernet error
* counter
* @pl: a pointer to a &struct phylink returned from phylink_create().
*
* Read the Energy Efficient Ethernet error counter from the PHY associated
* with the phylink instance specified by @pl.
*
* Returns positive error counter value, or negative error code.
*/
int phylink_get_eee_err(struct phylink *pl)
{
int ret = 0;
ASSERT_RTNL();
if (pl->phydev)
ret = phy_get_eee_err(pl->phydev);
return ret;
}
EXPORT_SYMBOL_GPL(phylink_get_eee_err);
--
2.28.0
