Sorry, I mis-copied 2 addresses. make sure they are CCed. On 9/1/20 11:41 AM, Cao jin wrote: > Typo fix & file name update > > Signed-off-by: Cao jin <caoj.fnst@xxxxxxxxxxxxxx> > --- > Documentation/x86/boot.rst | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/x86/boot.rst b/Documentation/x86/boot.rst > index 7fafc7ac00d7..c04afec90486 100644 > --- a/Documentation/x86/boot.rst > +++ b/Documentation/x86/boot.rst > @@ -1379,7 +1379,7 @@ can be calculated as follows:: > In addition to read/modify/write the setup header of the struct > boot_params as that of 16-bit boot protocol, the boot loader should > also fill the additional fields of the struct boot_params as described > -in zero-page.txt. > +in zero-page.rst. > > After setting up the struct boot_params, the boot loader can load > 64-bit kernel in the same way as that of 16-bit boot protocol, but > @@ -1391,7 +1391,7 @@ In 64-bit boot protocol, the kernel is started by jumping to the > > At entry, the CPU must be in 64-bit mode with paging enabled. > The range with setup_header.init_size from start address of loaded > -kernel and zero page and command line buffer get ident mapping; > +kernel and zero page and command line buffer get identity mapping; > a GDT must be loaded with the descriptors for selectors > __BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G flat > segment; __BOOT_CS must have execute/read permission, and __BOOT_DS > -- Sincerely, Cao jin
