Some files got renamed. Those were all fixed automatically by
./scripts/documentation-file-ref-check --fix
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 2 +-
Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt | 4 ++--
Documentation/devicetree/bindings/display/imx/ldb.txt | 4 ++--
Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt | 2 +-
MAINTAINERS | 4 ++--
5 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index 715047444391..10b8459e49f8 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -47,7 +47,7 @@ Required properties:
&lsio_mu1 1 2
&lsio_mu1 1 3
&lsio_mu1 3 3>;
- See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+ See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
for detailed mailbox binding.
Note: Each mu which supports general interrupt should have an alias correctly
diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
index 5bf77f6dd19d..5a99490c17b9 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
@@ -68,7 +68,7 @@ Required properties:
datasheet
- clocks : phandle to the PRE axi clock input, as described
in Documentation/devicetree/bindings/clock/clock-bindings.txt and
- Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
- clock-names: should be "axi"
- interrupts: should contain the PRE interrupt
- fsl,iram: phandle pointing to the mmio-sram device node, that should be
@@ -94,7 +94,7 @@ Required properties:
datasheet
- clocks : phandles to the PRG ipg and axi clock inputs, as described
in Documentation/devicetree/bindings/clock/clock-bindings.txt and
- Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
- clock-names: should be "ipg" and "axi"
- fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
PRE as the first entry and the muxable PREs following.
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
index 38c637fa39dd..8e6e7d797943 100644
--- a/Documentation/devicetree/bindings/display/imx/ldb.txt
+++ b/Documentation/devicetree/bindings/display/imx/ldb.txt
@@ -30,8 +30,8 @@ Required properties:
"di2_sel" - IPU2 DI0 mux
"di3_sel" - IPU2 DI1 mux
The needed clock numbers for each are documented in
- Documentation/devicetree/bindings/clock/imx5-clock.txt, and in
- Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+ Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
Optional properties:
- pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
index 790311a42bf1..c8c1e913f4e7 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
@@ -19,7 +19,7 @@ Required properties:
SPI Controller nodes must be child of GENI based Qualcomm Universal
Peripharal. Please refer GENI based QUP wrapper controller node bindings
-described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt.
+described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
SPI slave nodes must be children of the SPI master node and conform to SPI bus
binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
diff --git a/MAINTAINERS b/MAINTAINERS
index 0617dd671c2d..452904d75228 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14561,8 +14561,8 @@ RENESAS R-CAR THERMAL DRIVERS
M: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
L: linux-renesas-soc@xxxxxxxxxxxxxxx
S: Supported
-F: Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
-F: Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+F: Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
+F: Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
F: drivers/thermal/rcar_gen3_thermal.c
F: drivers/thermal/rcar_thermal.c
--
2.26.2
