Not much to be done here:
- add SPDX header;
- adjust title markup;
- remove a tail whitespace;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
Documentation/networking/index.rst | 1 +
.../networking/{x25-iface.txt => x25-iface.rst} | 10 ++++++++--
include/uapi/linux/if_x25.h | 2 +-
net/x25/Kconfig | 2 +-
4 files changed, 11 insertions(+), 4 deletions(-)
rename Documentation/networking/{x25-iface.txt => x25-iface.rst} (96%)
diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index a72fdfb391b6..7a4bdbc111b0 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -115,6 +115,7 @@ Contents:
udplite
vrf
vxlan
+ x25-iface
.. only:: subproject and html
diff --git a/Documentation/networking/x25-iface.txt b/Documentation/networking/x25-iface.rst
similarity index 96%
rename from Documentation/networking/x25-iface.txt
rename to Documentation/networking/x25-iface.rst
index 7f213b556e85..df401891dce6 100644
--- a/Documentation/networking/x25-iface.txt
+++ b/Documentation/networking/x25-iface.rst
@@ -1,4 +1,10 @@
- X.25 Device Driver Interface 1.1
+.. SPDX-License-Identifier: GPL-2.0
+
+============================-
+X.25 Device Driver Interface
+============================-
+
+Version 1.1
Jonathan Naylor 26.12.96
@@ -99,7 +105,7 @@ reduced by the following measures or a combination thereof:
(1) Drivers for kernel versions 2.4.x and above should always check the
return value of netif_rx(). If it returns NET_RX_DROP, the
driver's LAPB protocol must not confirm reception of the frame
- to the peer.
+ to the peer.
This will reliably suppress packet loss. The LAPB protocol will
automatically cause the peer to re-transmit the dropped packet
later.
diff --git a/include/uapi/linux/if_x25.h b/include/uapi/linux/if_x25.h
index 5d962448345f..3a5938e38370 100644
--- a/include/uapi/linux/if_x25.h
+++ b/include/uapi/linux/if_x25.h
@@ -18,7 +18,7 @@
#include <linux/types.h>
-/* Documentation/networking/x25-iface.txt */
+/* Documentation/networking/x25-iface.rst */
#define X25_IFACE_DATA 0x00
#define X25_IFACE_CONNECT 0x01
#define X25_IFACE_DISCONNECT 0x02
diff --git a/net/x25/Kconfig b/net/x25/Kconfig
index 2ecb2e5e241e..a328f79885d1 100644
--- a/net/x25/Kconfig
+++ b/net/x25/Kconfig
@@ -21,7 +21,7 @@ config X25
<http://docwiki.cisco.com/wiki/X.25>.
Information about X.25 for Linux is contained in the files
<file:Documentation/networking/x25.txt> and
- <file:Documentation/networking/x25-iface.txt>.
+ <file:Documentation/networking/x25-iface.rst>.
One connects to an X.25 network either with a dedicated network card
using the X.21 protocol (not yet supported by Linux) or one can do
--
2.25.4
