- add SPDX header;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
.../networking/device_drivers/index.rst | 1 +
.../networking/device_drivers/smsc/smc9.rst | 49 +++++++++++++++++++
.../networking/device_drivers/smsc/smc9.txt | 42 ----------------
drivers/net/ethernet/smsc/Kconfig | 4 +-
4 files changed, 52 insertions(+), 44 deletions(-)
create mode 100644 Documentation/networking/device_drivers/smsc/smc9.rst
delete mode 100644 Documentation/networking/device_drivers/smsc/smc9.txt
diff --git a/Documentation/networking/device_drivers/index.rst b/Documentation/networking/device_drivers/index.rst
index 77270d59943b..3479e6f576c3 100644
--- a/Documentation/networking/device_drivers/index.rst
+++ b/Documentation/networking/device_drivers/index.rst
@@ -46,6 +46,7 @@ Contents:
neterion/vxge
qualcomm/rmnet
sb1000
+ smsc/smc9
.. only:: subproject and html
diff --git a/Documentation/networking/device_drivers/smsc/smc9.rst b/Documentation/networking/device_drivers/smsc/smc9.rst
new file mode 100644
index 000000000000..7cdcb9139942
--- /dev/null
+++ b/Documentation/networking/device_drivers/smsc/smc9.rst
@@ -0,0 +1,49 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+================
+SMC 9xxxx Driver
+================
+
+Revision 0.12
+
+3/5/96
+
+Copyright 1996 Erik Stahlman
+
+Released under terms of the GNU General Public License.
+
+This file contains the instructions and caveats for my SMC9xxx driver. You
+should not be using the driver without reading this file.
+
+Things to note about installation:
+
+ 1. The driver should work on all kernels from 1.2.13 until 1.3.71.
+ (A kernel patch is supplied for 1.3.71 )
+
+ 2. If you include this into the kernel, you might need to change some
+ options, such as for forcing IRQ.
+
+
+ 3. To compile as a module, run 'make'.
+ Make will give you the appropriate options for various kernel support.
+
+ 4. Loading the driver as a module::
+
+ use: insmod smc9194.o
+ optional parameters:
+ io=xxxx : your base address
+ irq=xx : your irq
+ ifport=x : 0 for whatever is default
+ 1 for twisted pair
+ 2 for AUI ( or BNC on some cards )
+
+How to obtain the latest version?
+
+FTP:
+ ftp://fenris.campus.vt.edu/smc9/smc9-12.tar.gz
+ ftp://sfbox.vt.edu/filebox/F/fenris/smc9/smc9-12.tar.gz
+
+
+Contacting me:
+ erik@xxxxxxxxxxx
+
diff --git a/Documentation/networking/device_drivers/smsc/smc9.txt b/Documentation/networking/device_drivers/smsc/smc9.txt
deleted file mode 100644
index d1e15074e43d..000000000000
--- a/Documentation/networking/device_drivers/smsc/smc9.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-
-SMC 9xxxx Driver
-Revision 0.12
-3/5/96
-Copyright 1996 Erik Stahlman
-Released under terms of the GNU General Public License.
-
-This file contains the instructions and caveats for my SMC9xxx driver. You
-should not be using the driver without reading this file.
-
-Things to note about installation:
-
- 1. The driver should work on all kernels from 1.2.13 until 1.3.71.
- (A kernel patch is supplied for 1.3.71 )
-
- 2. If you include this into the kernel, you might need to change some
- options, such as for forcing IRQ.
-
-
- 3. To compile as a module, run 'make' .
- Make will give you the appropriate options for various kernel support.
-
- 4. Loading the driver as a module :
-
- use: insmod smc9194.o
- optional parameters:
- io=xxxx : your base address
- irq=xx : your irq
- ifport=x : 0 for whatever is default
- 1 for twisted pair
- 2 for AUI ( or BNC on some cards )
-
-How to obtain the latest version?
-
-FTP:
- ftp://fenris.campus.vt.edu/smc9/smc9-12.tar.gz
- ftp://sfbox.vt.edu/filebox/F/fenris/smc9/smc9-12.tar.gz
-
-
-Contacting me:
- erik@xxxxxxxxxxx
-
diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig
index 64ca1b36b91e..4fcc5858a750 100644
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
@@ -28,7 +28,7 @@ config SMC9194
option if you have a DELL laptop with the docking station, or
another SMC9192/9194 based chipset. Say Y if you want it compiled
into the kernel, and read the file
- <file:Documentation/networking/device_drivers/smsc/smc9.txt>.
+ <file:Documentation/networking/device_drivers/smsc/smc9.rst>.
To compile this driver as a module, choose M here. The module
will be called smc9194.
@@ -43,7 +43,7 @@ config SMC91X
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
compiled into the kernel, and read the file
- <file:Documentation/networking/device_drivers/smsc/smc9.txt>.
+ <file:Documentation/networking/device_drivers/smsc/smc9.rst>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
--
2.25.4
