[PATCH 06/16] kbuild: doc: document the new syntax 'userprogs'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Kbuild now supports the syntax 'userprogs' to compile userspace
programs for the same architecture as the kernel.

Insert the section '5 Userspace Program support' to explain it.

I copy-pasted '4 Host Program support' and fixed it up.

Signed-off-by: Masahiro Yamada <masahiroy@xxxxxxxxxx>
---

 Documentation/kbuild/makefiles.rst | 184 +++++++++++++++++++++--------
 1 file changed, 136 insertions(+), 48 deletions(-)

diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst
index b80257a03830..251e5431276e 100644
--- a/Documentation/kbuild/makefiles.rst
+++ b/Documentation/kbuild/makefiles.rst
@@ -29,31 +29,37 @@ This document describes the Linux kernel Makefiles.
 	   --- 4.4 Controlling compiler options for host programs
 	   --- 4.5 When host programs are actually built
 
-	=== 5 Kbuild clean infrastructure
-
-	=== 6 Architecture Makefiles
-	   --- 6.1 Set variables to tweak the build to the architecture
-	   --- 6.2 Add prerequisites to archheaders:
-	   --- 6.3 Add prerequisites to archprepare:
-	   --- 6.4 List directories to visit when descending
-	   --- 6.5 Architecture-specific boot images
-	   --- 6.6 Building non-kbuild targets
-	   --- 6.7 Commands useful for building a boot image
-	   --- 6.8 Custom kbuild commands
-	   --- 6.9 Preprocessing linker scripts
-	   --- 6.10 Generic header files
-	   --- 6.11 Post-link pass
-
-	=== 7 Kbuild syntax for exported headers
-		--- 7.1 no-export-headers
-		--- 7.2 generic-y
-		--- 7.3 generated-y
-		--- 7.4 mandatory-y
-
-	=== 8 Kbuild Variables
-	=== 9 Makefile language
-	=== 10 Credits
-	=== 11 TODO
+	=== 5 Userspace Program support
+	   --- 5.1 Simple Userspace Program
+	   --- 5.2 Composite Userspace Programs
+	   --- 5.3 Controlling compiler options for userspace programs
+	   --- 5.4 When userspace programs are actually built
+
+	=== 6 Kbuild clean infrastructure
+
+	=== 7 Architecture Makefiles
+	   --- 7.1 Set variables to tweak the build to the architecture
+	   --- 7.2 Add prerequisites to archheaders:
+	   --- 7.3 Add prerequisites to archprepare:
+	   --- 7.4 List directories to visit when descending
+	   --- 7.5 Architecture-specific boot images
+	   --- 7.6 Building non-kbuild targets
+	   --- 7.7 Commands useful for building a boot image
+	   --- 7.8 Custom kbuild commands
+	   --- 7.9 Preprocessing linker scripts
+	   --- 7.10 Generic header files
+	   --- 7.11 Post-link pass
+
+	=== 8 Kbuild syntax for exported headers
+		--- 8.1 no-export-headers
+		--- 8.2 generic-y
+		--- 8.3 generated-y
+		--- 8.4 mandatory-y
+
+	=== 9 Kbuild Variables
+	=== 10 Makefile language
+	=== 11 Credits
+	=== 12 TODO
 
 1 Overview
 ==========
@@ -732,7 +738,89 @@ Both possibilities are described in the following.
 	This will tell kbuild to build lxdialog even if not referenced in
 	any rule.
 
-5 Kbuild clean infrastructure
+5 Userspace Program support
+===========================
+
+Just like host programs, Kbuild also supports building userspace executables
+for the target architecture (i.e. the same architecture as you are building
+the kernel for).
+
+The syntax is quite similar. The difference is to use "userprogs" instead of
+"hostprogs".
+
+5.1 Simple Userspace Program
+----------------------------
+
+	The following line tells kbuild that the program bpf-direct shall be
+	built for the target architecture.
+
+	Example::
+
+		userprogs := bpf-direct
+
+	Kbuild assumes in the above example that bpf-direct is made from a
+	single C source file named bpf-direct.c located in the same directory
+	as the Makefile.
+
+5.2 Composite Userspace Programs
+--------------------------------
+
+	Userspace programs can be made up based on composite objects.
+	The syntax used to define composite objects for userspace programs is
+	similar to the syntax used for kernel objects.
+	$(<executable>-objs) lists all objects used to link the final
+	executable.
+
+	Example::
+
+		#samples/seccomp/Makefile
+		userprogs      := bpf-fancy
+		bpf-fancy-objs := bpf-fancy.o bpf-helper.o
+
+	Objects with extension .o are compiled from the corresponding .c
+	files. In the above example, bpf-fancy.c is compiled to bpf-fancy.o
+	and bpf-helper.c is compiled to bpf-helper.o.
+
+	Finally, the two .o files are linked to the executable, bpf-fancy.
+	Note: The syntax <executable>-y is not permitted for userspace programs.
+
+5.3 Controlling compiler options for userspace programs
+-------------------------------------------------------
+
+	When compiling userspace programs, it is possible to set specific flags.
+	The programs will always be compiled utilising $(CC) passed
+	the options specified in $(KBUILD_USERCFLAGS).
+	To set flags that will take effect for all userspace programs created
+	in that Makefile, use the variable user-ccflags.
+
+	Example::
+
+		# samples/seccomp/Makefile
+		user-ccflags += -I usr/include
+
+	To set specific flags for a single file the following construction
+	is used:
+
+	Example::
+
+		bpf-helper-ccflags += -I user/include
+
+	It is also possible to specify additional options to the linker.
+
+	Example::
+
+		# net/bpfilter/Makefile
+		bpfilter_umh-ldflags += -static
+
+	When linking bpfilter_umh-ldflags, it will be passed the extra option
+	-static.
+
+5.4 When userspace programs are actually built
+----------------------------------------------
+
+	Same as "When host programs are actually built".
+
+6 Kbuild clean infrastructure
 =============================
 
 "make clean" deletes most generated files in the obj tree where the kernel
@@ -790,7 +878,7 @@ is not operational at that point.
 Note 2: All directories listed in core-y, libs-y, drivers-y and net-y will
 be visited during "make clean".
 
-6 Architecture Makefiles
+7 Architecture Makefiles
 ========================
 
 The top level Makefile sets up the environment and does the preparation,
@@ -820,7 +908,7 @@ When kbuild executes, the following steps are followed (roughly):
    - Preparing initrd images and the like
 
 
-6.1 Set variables to tweak the build to the architecture
+7.1 Set variables to tweak the build to the architecture
 --------------------------------------------------------
 
     LDFLAGS
@@ -967,7 +1055,7 @@ When kbuild executes, the following steps are followed (roughly):
 	KBUILD_VMLINUX_LIBS together specify all the object files used to
 	link vmlinux.
 
-6.2 Add prerequisites to archheaders
+7.2 Add prerequisites to archheaders
 ------------------------------------
 
 	The archheaders: rule is used to generate header files that
@@ -977,7 +1065,7 @@ When kbuild executes, the following steps are followed (roughly):
 	architecture itself.
 
 
-6.3 Add prerequisites to archprepare
+7.3 Add prerequisites to archprepare
 ------------------------------------
 
 	The archprepare: rule is used to list prerequisites that need to be
@@ -995,7 +1083,7 @@ When kbuild executes, the following steps are followed (roughly):
 	generating offset header files.
 
 
-6.4 List directories to visit when descending
+7.4 List directories to visit when descending
 ---------------------------------------------
 
 	An arch Makefile cooperates with the top Makefile to define variables
@@ -1030,7 +1118,7 @@ When kbuild executes, the following steps are followed (roughly):
 		drivers-$(CONFIG_OPROFILE)  += arch/sparc64/oprofile/
 
 
-6.5 Architecture-specific boot images
+7.5 Architecture-specific boot images
 -------------------------------------
 
 	An arch Makefile specifies goals that take the vmlinux file, compress
@@ -1085,7 +1173,7 @@ When kbuild executes, the following steps are followed (roughly):
 
 	When "make" is executed without arguments, bzImage will be built.
 
-6.6 Building non-kbuild targets
+7.6 Building non-kbuild targets
 -------------------------------
 
     extra-y
@@ -1108,7 +1196,7 @@ When kbuild executes, the following steps are followed (roughly):
 	In this example, extra-y is used to list object files that
 	shall be built, but shall not be linked as part of built-in.a.
 
-6.7 Commands useful for building a boot image
+7.7 Commands useful for building a boot image
 ---------------------------------------------
 
     Kbuild provides a few macros that are useful when building a
@@ -1211,7 +1299,7 @@ When kbuild executes, the following steps are followed (roughly):
 		targets += $(dtb-y)
 		DTC_FLAGS ?= -p 1024
 
-6.8 Custom kbuild commands
+7.8 Custom kbuild commands
 --------------------------
 
 	When kbuild is executing with KBUILD_VERBOSE=0, then only a shorthand
@@ -1241,7 +1329,7 @@ When kbuild executes, the following steps are followed (roughly):
 	will be displayed with "make KBUILD_VERBOSE=0".
 
 
-6.9 Preprocessing linker scripts
+7.9 Preprocessing linker scripts
 --------------------------------
 
 	When the vmlinux image is built, the linker script
@@ -1274,7 +1362,7 @@ When kbuild executes, the following steps are followed (roughly):
 	The kbuild infrastructure for `*lds` files is used in several
 	architecture-specific files.
 
-6.10 Generic header files
+7.10 Generic header files
 -------------------------
 
 	The directory include/asm-generic contains the header files
@@ -1283,7 +1371,7 @@ When kbuild executes, the following steps are followed (roughly):
 	to list the file in the Kbuild file.
 	See "7.2 generic-y" for further info on syntax etc.
 
-6.11 Post-link pass
+7.11 Post-link pass
 -------------------
 
 	If the file arch/xxx/Makefile.postlink exists, this makefile
@@ -1299,7 +1387,7 @@ When kbuild executes, the following steps are followed (roughly):
 	For example, powerpc uses this to check relocation sanity of
 	the linked vmlinux file.
 
-7 Kbuild syntax for exported headers
+8 Kbuild syntax for exported headers
 ------------------------------------
 
 The kernel includes a set of headers that is exported to userspace.
@@ -1319,14 +1407,14 @@ A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
 arch/<arch>/include/asm/ to list asm files coming from asm-generic.
 See subsequent chapter for the syntax of the Kbuild file.
 
-7.1 no-export-headers
+8.1 no-export-headers
 ---------------------
 
 	no-export-headers is essentially used by include/uapi/linux/Kbuild to
 	avoid exporting specific headers (e.g. kvm.h) on architectures that do
 	not support it. It should be avoided as much as possible.
 
-7.2 generic-y
+8.2 generic-y
 -------------
 
 	If an architecture uses a verbatim copy of a header from
@@ -1356,7 +1444,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 
 			#include <asm-generic/termios.h>
 
-7.3 generated-y
+8.3 generated-y
 ---------------
 
 	If an architecture generates other header files alongside generic-y
@@ -1370,7 +1458,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 			#arch/x86/include/asm/Kbuild
 			generated-y += syscalls_32.h
 
-7.4 mandatory-y
+8.4 mandatory-y
 ---------------
 
 	mandatory-y is essentially used by include/(uapi/)asm-generic/Kbuild
@@ -1380,7 +1468,7 @@ See subsequent chapter for the syntax of the Kbuild file.
 	in arch/$(ARCH)/include/(uapi/)/asm, Kbuild will automatically generate
 	a wrapper of the asm-generic one.
 
-8 Kbuild Variables
+9 Kbuild Variables
 ==================
 
 The top Makefile exports the following variables:
@@ -1438,8 +1526,8 @@ The top Makefile exports the following variables:
 	command.
 
 
-9 Makefile language
-===================
+10 Makefile language
+====================
 
 The kernel Makefiles are designed to be run with GNU Make.  The Makefiles
 use only the documented features of GNU Make, but they do use many
@@ -1458,7 +1546,7 @@ time the left-hand side is used.
 There are some cases where "=" is appropriate.  Usually, though, ":="
 is the right choice.
 
-10 Credits
+11 Credits
 ==========
 
 - Original version made by Michael Elizabeth Chastain, <mailto:mec@xxxxxxxxx>
@@ -1466,7 +1554,7 @@ is the right choice.
 - Updates by Sam Ravnborg <sam@xxxxxxxxxxxx>
 - Language QA by Jan Engelhardt <jengelh@xxxxxx>
 
-11 TODO
+12 TODO
 =======
 
 - Describe how kbuild supports shipped files with _shipped.
-- 
2.25.1




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux