On Wed, Apr 15, 2020 at 03:42:58PM +0800, Erik Skultety wrote:
> On Mon, Apr 13, 2020 at 01:55:04AM -0400, Yan Zhao wrote:
> > migration_version attribute is used to check migration compatibility
> > between two mdev devices of the same mdev type.
> > The key is that it's rw and its data is opaque to userspace.
> >
> > Userspace reads migration_version of mdev device at source side and
> > writes the value to migration_version attribute of mdev device at target
> > side. It judges migration compatibility according to whether the read
> > and write operations succeed or fail.
> >
> > Currently, it is able to read/write migration_version attribute under two
> > places:
> >
> > (1) under mdev_type node
> > userspace is able to know whether two mdev devices are compatible before
> > a mdev device is created.
> >
> > userspace also needs to check whether the two mdev devices are of the same
> > mdev type before checking the migration_version attribute. It also needs
> > to check device creation parameters if aggregation is supported in future.
> >
> > (2) under mdev device node
> > userspace is able to know whether two mdev devices are compatible after
> > they are all created. But it does not need to check mdev type and device
> > creation parameter for aggregation as device vendor driver would have
> > incorporated those information into the migration_version attribute.
> >
> > __ userspace
> > /\ \
> > / \write
> > / read \
> > ________/__________ ___\|/_____________
> > | migration_version | | migration_version |-->check migration
> > --------------------- --------------------- compatibility
> > mdev device A mdev device B
> >
> > This patch is for mdev documentation about the second place (under
> > mdev device node)
> >
> > Cc: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > Cc: Erik Skultety <eskultet@xxxxxxxxxx>
> > Cc: "Dr. David Alan Gilbert" <dgilbert@xxxxxxxxxx>
> > Cc: Cornelia Huck <cohuck@xxxxxxxxxx>
> > Cc: "Tian, Kevin" <kevin.tian@xxxxxxxxx>
> > Cc: Zhenyu Wang <zhenyuw@xxxxxxxxxxxxxxx>
> > Cc: "Wang, Zhi A" <zhi.a.wang@xxxxxxxxx>
> > Cc: Neo Jia <cjia@xxxxxxxxxx>
> > Cc: Kirti Wankhede <kwankhede@xxxxxxxxxx>
> > Cc: Daniel P. Berrangé <berrange@xxxxxxxxxx>
> > Cc: Christophe de Dinechin <dinechin@xxxxxxxxxx>
> >
> > Signed-off-by: Yan Zhao <yan.y.zhao@xxxxxxxxx>
> > ---
> > .../driver-api/vfio-mediated-device.rst | 70 +++++++++++++++++++
> > 1 file changed, 70 insertions(+)
> >
> > diff --git a/Documentation/driver-api/vfio-mediated-device.rst b/Documentation/driver-api/vfio-mediated-device.rst
> > index 2d1f3c0f3c8f..efbadfd51b7e 100644
> > --- a/Documentation/driver-api/vfio-mediated-device.rst
> > +++ b/Documentation/driver-api/vfio-mediated-device.rst
> > @@ -383,6 +383,7 @@ Directories and Files Under the sysfs for Each mdev Device
> > |--- remove
> > |--- mdev_type {link to its type}
> > |--- vendor-specific-attributes [optional]
> > + |--- migration_verion [optional]
> >
> > * remove (write only)
> >
> > @@ -394,6 +395,75 @@ Example::
> >
> > # echo 1 > /sys/bus/mdev/devices/$mdev_UUID/remove
> >
> > +* migration_version (rw, optional)
>
> Hmm, ^this is not consistent with how patch 1/5 reports this information, but
> looking at the existing docs we're not doing very well in terms of consistency
> there either.
>
> I suggest we go with "(read-write)" in both patch 1/5 and here and then start
> the paragraph with "This is an optional attribute."
>
ok. got it.
> > + It is used to check migration compatibility between two mdev devices.
> > + Absence of this attribute means the mdev device does not support migration.
> > +
> > + This attribute provides a way to check migration compatibility between two
> > + mdev devices from userspace after device created. The intended usage is
>
> after the target device has been created.
>
> side note: maybe add something like "(see the migration_version attribute of
> the device node if the target device already exists)" in the same section in
> patch 1/5.
ok. good idea.
>
> > + for userspace to read the migration_version attribute from one mdev device and
> > + then writing that value to the migration_version attribute of the other mdev
> > + device. The second mdev device indicates compatibility via the return code of
> > + the write operation. This makes compatibility between mdev devices completely
> > + vendor-defined and opaque to userspace. Userspace should do nothing more
> > + than use the migration_version attribute to confirm source to target
> > + compatibility.
>
> ...
>
> > +
> > + Reading/Writing Attribute Data:
> > + read(2) will fail if a mdev device does not support migration and otherwise
> > + succeed and return migration_version string of the mdev device.
> > +
> > + This migration_version string is vendor defined and opaque to the
> > + userspace. Vendor is free to include whatever they feel is relevant.
> > + e.g. <pciid of parent device>-<software version>.
> > +
> > + Restrictions on this migration_version string:
> > + 1. It should only contain ascii characters
> > + 2. MAX Length is PATH_MAX (4096)
> > +
> > + write(2) expects migration_version string of source mdev device, and will
> > + succeed if it is determined to be compatible and otherwise fail with
> > + vendor specific errno.
> > +
> > + Errno:
> > + -An errno on read(2) indicates the mdev devicedoes not support migration;
>
> s/devicedoes/device does/
>
sorry for such kind of errors.
> > + -An errno on write(2) indicates the mdev devices are incompatible or the
> > + target doesn't support migration.
> > + Vendor driver is free to define specific errno and is suggested to
> > + print detailed error in syslog for diagnose purpose.
> > +
> > + Userspace should treat ANY of below conditions as two mdev devices not
> > + compatible:
> > + (1) any one of the two mdev devices does not have a migration_version
> > + attribute
> > + (2) error when reading from migration_version attribute of one mdev device
> > + (3) error when writing migration_version string of one mdev device to
> > + migration_version attribute of the other mdev device
> > +
> > + Userspace should regard two mdev devices compatible when ALL of below
> > + conditions are met:
> > + (1) success when reading from migration_version attribute of one mdev device.
> > + (2) success when writing migration_version string of one mdev device to
> > + migration_version attribute of the other mdev device.
> > +
> > + Example Usage:
> > + (1) Retrieve the mdev source migration_version:
> > +
> > + # cat /sys/bus/mdev/devices/$mdev_UUID1/migration_version
> > +
> > + If reading the source migration_version generates an error, migration is not
> > + possible.
> > +
> > + (2) Test source migration_version at target:
> > +
> > + Given a migration_version as outlined above, its compatibility to an
> > + instantiated device of the same mdev type can be tested as:
> > + # echo $VERSION > /sys/bus/mdev/devices/$mdev_UUID2/migration_version
> > +
> > + If this write fails, the source and target migration versions are not
> > + compatible or the target does not support migration.
> > +
> > +
> > Mediated device Hot plug
> > ------------------------
>
> Overall, the same comments as in 1/5 apply text-wise.
>
got it. will align it with the first patch.
Thanks
Yan
> Regards,
> --
> Erik Skultety
>
