This section applies only to code for very old kernels. Avoid people reading this unnecessarily. Signed-off-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx> Reviewed-by: Jean Delvare <jdelvare@xxxxxxx> --- Documentation/i2c/old-module-parameters.rst | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/i2c/old-module-parameters.rst b/Documentation/i2c/old-module-parameters.rst index 1a18e2b0f593..92a403d21a62 100644 --- a/Documentation/i2c/old-module-parameters.rst +++ b/Documentation/i2c/old-module-parameters.rst @@ -2,6 +2,11 @@ I2C device driver binding control from user-space ================================================= +.. NOTE:: + Note: this section is only relevant if you are handling some old code + found in kernel 2.6. If you work with more recent kernels, you can + safely skip this section. + Up to kernel 2.6.32, many I2C drivers used helper macros provided by <linux/i2c.h> which created standard module parameters to let the user control how the driver would probe I2C buses and attach to devices. These -- 2.25.0
