Use ReST syntax so that a proper hyperlink is generated. Signed-off-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx> Reviewed-by: Jean Delvare <jdelvare@xxxxxxx> --- Changes in v2: - re-add the reference to the section (Jean Delvare) --- Documentation/i2c/old-module-parameters.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/i2c/old-module-parameters.rst b/Documentation/i2c/old-module-parameters.rst index 78a6950e5763..1a18e2b0f593 100644 --- a/Documentation/i2c/old-module-parameters.rst +++ b/Documentation/i2c/old-module-parameters.rst @@ -12,8 +12,8 @@ address), "force" (to forcibly attach the driver to a given device) and With the conversion of the I2C subsystem to the standard device driver binding model, it became clear that these per-module parameters were no longer needed, and that a centralized implementation was possible. The new, -sysfs-based interface is described in the documentation file -"instantiating-devices", section "Method 4: Instantiate from user-space". +sysfs-based interface is described in :doc:`instantiating-devices`, section +"Method 4: Instantiate from user-space". Below is a mapping from the old module parameters to the new interface. -- 2.25.0
