On 8/27/19 1:09 PM, Peter Rosin wrote: > Three shall be the number thou shalt count, and the number of the > counting shall be three. Four shalt thou not count... > > One! Two! Five! > > Fixes: efb985f6b265 ("[PATCH] fbcon: Console Rotation - Add framebuffer console documentation") > Signed-off-by: Peter Rosin <peda@xxxxxxxxxx> Thanks, patch queued for v5.6 (also sorry for the delay). Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics > --- > Documentation/fb/fbcon.rst | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/Documentation/fb/fbcon.rst b/Documentation/fb/fbcon.rst > index ebca41785abe..65ba40255137 100644 > --- a/Documentation/fb/fbcon.rst > +++ b/Documentation/fb/fbcon.rst > @@ -127,7 +127,7 @@ C. Boot options > is typically located on the same video card. Thus, the consoles that > are controlled by the VGA console will be garbled. > > -4. fbcon=rotate:<n> > +5. fbcon=rotate:<n> > > This option changes the orientation angle of the console display. The > value 'n' accepts the following: > @@ -152,21 +152,21 @@ C. Boot options > Actually, the underlying fb driver is totally ignorant of console > rotation. > > -5. fbcon=margin:<color> > +6. fbcon=margin:<color> > > This option specifies the color of the margins. The margins are the > leftover area at the right and the bottom of the screen that are not > used by text. By default, this area will be black. The 'color' value > is an integer number that depends on the framebuffer driver being used. > > -6. fbcon=nodefer > +7. fbcon=nodefer > > If the kernel is compiled with deferred fbcon takeover support, normally > the framebuffer contents, left in place by the firmware/bootloader, will > be preserved until there actually is some text is output to the console. > This option causes fbcon to bind immediately to the fbdev device. > > -7. fbcon=logo-pos:<location> > +8. fbcon=logo-pos:<location> > > The only possible 'location' is 'center' (without quotes), and when > given, the bootup logo is moved from the default top-left corner