Re: [PATCH v4 01/10] kcsan: Add Kernel Concurrency Sanitizer infrastructure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> On Nov 14, 2019, at 1:02 PM, 'Marco Elver' via kasan-dev <kasan-dev@xxxxxxxxxxxxxxxx> wrote:
> +static noinline void kcsan_setup_watchpoint(const volatile void *ptr,
> +					    size_t size, bool is_write)
> +{
> +	atomic_long_t *watchpoint;
> +	union {
> +		u8 _1;
> +		u16 _2;
> +		u32 _4;
> +		u64 _8;
> +	} expect_value;
> +	bool value_change = false;
> +	unsigned long ua_flags = user_access_save();
> +	unsigned long irq_flags;
> +
> +	/*
> +	 * Always reset kcsan_skip counter in slow-path to avoid underflow; see
> +	 * should_watch().
> +	 */
> +	reset_kcsan_skip();
> +
> +	if (!kcsan_is_enabled())
> +		goto out;
> +
> +	if (!check_encodable((unsigned long)ptr, size)) {
> +		kcsan_counter_inc(KCSAN_COUNTER_UNENCODABLE_ACCESSES);
> +		goto out;
> +	}
> +
> +	/*
> +	 * Disable interrupts & preemptions to avoid another thread on the same
> +	 * CPU accessing memory locations for the set up watchpoint; this is to
> +	 * avoid reporting races to e.g. CPU-local data.
> +	 *
> +	 * An alternative would be adding the source CPU to the watchpoint
> +	 * encoding, and checking that watchpoint-CPU != this-CPU. There are
> +	 * several problems with this:
> +	 *   1. we should avoid stealing more bits from the watchpoint encoding
> +	 *      as it would affect accuracy, as well as increase performance
> +	 *      overhead in the fast-path;
> +	 *   2. if we are preempted, but there *is* a genuine data race, we
> +	 *      would *not* report it -- since this is the common case (vs.
> +	 *      CPU-local data accesses), it makes more sense (from a data race
> +	 *      detection point of view) to simply disable preemptions to ensure
> +	 *      as many tasks as possible run on other CPUs.
> +	 */
> +	local_irq_save(irq_flags);

Enabling KCSAN will now generate a warning during boot here.

Config (need to deselect KASAN and select KCSAN):

https://raw.githubusercontent.com/cailca/linux-mm/master/x86.config

[   13.358813][    T0] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[   13.361606][    T0] Speculative Store Bypass: Vulnerable
[   13.363254][    T0] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
[   13.366836][    T0] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[   13.369877][    T0] debug: unmapping init [mem 0xffffffff8dd83000-0xffffffff8dd87fff]
[   13.415028][    T1] ------------[ cut here ]------------
[   13.416814][    T1] DEBUG_LOCKS_WARN_ON(!current->hardirqs_enabled)
[   13.416814][    T1] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:4406 check_flags.part.26+0x102/0x240
[   13.416814][    T1] Modules linked in:
[   13.416814][    T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc2-next-20191220+ #4
[   13.416814][    T1] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 07/21/2016
[   13.416814][    T1] RIP: 0010:check_flags.part.26+0x102/0x240
[   13.416814][    T1] Code: bc 8d e8 51 a1 15 00 44 8b 05 2a a0 46 01 45 85 c0 0f 85 57 76 00 00 48 c7 c6 5d fa 7b 8d 48 c7 c7 b1 54 7b 8d e8 10 91 f5 ff <0f> 0b e9 3d 76 00 00 65 48 8b 3c 25 40 7f 01 00 e8 89 f0 ff ff e8
[   13.416814][    T1] RSP: 0000:ffff9d3206287ce8 EFLAGS: 00010082
[   13.416814][    T1] RAX: 0000000000000000 RBX: ffff8e5b8541e040 RCX: 0000000000000000
[   13.416814][    T1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
[   13.416814][    T1] RBP: ffff9d3206287cf0 R08: 0000000000000000 R09: 0000ffff8dbcc254
[   13.416814][    T1] R10: 0000ffffffffffff R11: 0000ffff8dbcc257 R12: 0000000000000235
[   13.416814][    T1] R13: 0000000000000000 R14: 0000000000000246 R15: 000000000000001b
[   13.416814][    T1] FS:  0000000000000000(0000) GS:ffff8e61e3200000(0000) knlGS:0000000000000000
[   13.416814][    T1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   13.416814][    T1] CR2: ffff8e79f07ff000 CR3: 0000001284c0e001 CR4: 00000000003606f0
[   13.416814][    T1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   13.416814][    T1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   13.416814][    T1] Call Trace:
[   13.416814][    T1]  lock_is_held_type+0x66/0x160
[   13.416814][    T1]  ___might_sleep+0xc1/0x1d0
[   13.416814][    T1]  __might_sleep+0x5b/0xa0
[   13.416814][    T1]  slab_pre_alloc_hook+0x7b/0xa0
[   13.416814][    T1]  __kmalloc_node+0x60/0x300
[   13.416814   T1]  ? alloc_cpumask_var_node+0x44/0x70
[   13.416814][    T1]  ? topology_phys_to_logical_die+0x7e/0x180
[   13.416814][    T1]  alloc_cpumask_var_node+0x44/0x70
[   13.416814][    T1]  zalloc_cpumask_var+0x2a/0x40
[   13.416814][    T1]  native_smp_prepare_cpus+0x246/0x425
[   13.416814][    T1]  kernel_init_freeable+0x1b8/0x496
[   13.416814][    T1]  ? rest_init+0x381/0x381
[   13.416814][    T1]  kernel_init+0x18/0x17f
[   13.416814][    T1]  ? rest_init+0x381/0x381
[   13.416814][    T1]  ret_from_fork+0x3a/0x50
[   13.416814][    T1] irq event stamp: 910
[   13.416814][    T1] hardirqs last  enabled at (909): [<ffffffff8d1240f3>] _raw_write_unlock_irqrestore+0x53/0x57
[   13.416814][    T1] hardirqs last disabled at (910): [<ffffffff8c8bba76>] kcsan_setup_watchpoint+0x96/0x460
[   13.416814][    T1] softirqs last  enabled at (0): [<ffffffff8c6b697a>] copy_process+0x11fa/0x34f0
[   13.416814][    T1] softirqs last disabled at (0): [<0000000000000000>] 0x0
[   13.416814][    T1] ---[ end trace 7d1df66da055aa92 ]---
[   13.416814][    T1] possible reason: unannotated irqs-on.
[   13.416814][ent stamp: 910
[   13.416814][    T1] hardirqs last  enabled at (909): [<ffffffff8d1240f3>] _raw_write_unlock_irqrestore+0x53/0x57
[   13.416814][    T1] hardirqs last disabled at (910): [<ffffffff8c8bba76>] kcsan_setup_watchpoint+0x96/0x460
[   13.416814][    T1] softirqs last  enabled at (0): [<ffffffff8c6b697a>] copy_process+0x11fa/0x34f0
[   13.416814][    T1] softirqs last disabled at (0): [<0000000000000000>] 0x0


The other issue is that the system is unable to boot due to endless of those messages.

[   17.976814][  T578] Reported by Kernel Concurrency Sanitizer on:
[   17.976814][  T578] CPU: 12 PID: 578 Comm: pgdatinit1 Tainted: G        W         5.5.0-rc2-next-20191220+ #4
[   17.976814][  T578] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 07/21/2016
[   17.976814][  T578] ==================================================================
[   17.976814][  T578] ==================================================================
[   17.976814][  T578] BUG: KCSAN: data-race in __change_page_attr / __change_page_attr
[   17.976814][  T578] 
[   17.976814][  T578] write to 0xffffffff8dda0de0 of 8 bytes by task 577 on cpu 2:
[   17.976814][  T578]  __change_page_attr+0xef7/0x16a0
[   17.976814][  T578]  __change_page_attr_set_clr+0xec/0x4f0
[   17.97681pages_np+0xcc/0x100
[   17.976814][  T578]  __kernel_map_pages+0xd6/0xdb
[   17.976814][  T578]  __free_pages_ok+0x1a8/0x730
[   17.976814][  T578]  __free_pages+0x51/0x90
[   17.976814][  T578]  __free_pages_core+0x1c7/0x2c0
[   17.976814][  T578]  deferred_free_range+0x59/0x8f
[   17.976814][  T578]  deferred_init_maxorder+0x1d6/0x21d
[   17.976814][  T578]  deferred_init_memmap+0x14a/0x1c1
[   17.976814][  T578]  kthread+0x1e0/0x200
[   17.976814][  T578]  ret_from_fork+0x3a/0x50
[   17.976814][  T578] 
[   17.976814][  T578] read to 0xffffffff8dda0de0 of 8 bytes by task 578 on cpu 12:
[   17.976814][  T578]  __change_page_attr+0xed1/0x16a0
[   17.976814][  T578]  __change_page_attr_set_clr+0xec/0x4f0
[   17.976814][  T578]  __set_pages_np+0xcc/0x100
[   17.976814][  T578]  __kernel_map_pages+0xd6/0xdb
[   17.976814][  T578]  __free_pages_ok+0x1a8/0x730
[   17.976814][  T578]  __free_pages+0x51/0x90
[   17.976814][  T578]  __free_pages_core+0x1c7/0x2c0
[   17.976814][  T578]  deferred_free_range+0x59/0x8f
[   17.976814][  T578]  deferred_init_maxorder+0x1aa/0x21d
[   17.976814][  T578]  deferred_init_memmap+0x14a/0x1c1
[   17.976814][  T578]  kthread+0x1e0/0x200
[   17.976814][  T578]  ret_from_fork+0x3a/0x50

# ./scripts/faddr2line vmlinux __change_page_attr+0xef7/0x16a0
__change_page_attr+0xef7/0x16a0:
static_protections at arch/x86/mm/pat/set_memory.c:528
(inlined by) __change_page_attr at arch/x86/mm/pat/set_memory.c:1516

# ./scripts/faddr2line vmlinux __change_page_attr+0xed1/0x16a0
__change_page_attr+0xed1/0x16a0:
cpa_inc_4k_install at arch/x86/mm/pat/set_memory.c:131
(inlined by) __change_page_attr at arch/x86/mm/pat/set_memory.c:1514

> +
> +	watchpoint = insert_watchpoint((unsigned long)ptr, size, is_write);
> +	if (watchpoint == NULL) {
> +		/*
> +		 * Out of capacity: the size of `watchpoints`, and the frequency
> +		 * with which `should_watch()` returns true should be tweaked so
> +		 * that this case happens very rarely.
> +		 */
> +		kcsan_counter_inc(KCSAN_COUNTER_NO_CAPACITY);
> +		goto out_unlock;
> +	}
> +





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux