Re: [PATCH v4 1/2] dell-smm-hwmon: Add support for disabling automatic BIOS fan control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday 18 November 2019 18:11:47 Giovanni Mascellani wrote:
> This patch exports standard hwmon pwmX_enable sysfs attribute for
> enabling or disabling automatic fan control by BIOS. Standard value
> "1" is for disabling automatic BIOS fan control and value "2" for
> enabling.
> 
> By default BIOS auto mode is enabled by laptop firmware.
> 
> When BIOS auto mode is enabled, custom fan speed value (set via hwmon
> pwmX sysfs attribute) is overwritten by SMM in few seconds and
> therefore any custom settings are without effect. So this is reason
> why implementing option for disabling BIOS auto mode is needed.
> 
> So finally this patch allows kernel to set and control fan speed on
> laptops, but it can be dangerous (like setting speed of other fans).
> 
> The SMM commands to enable or disable automatic fan control are not
> documented and are not the same on all Dell laptops. Therefore a
> whitelist is used to send the correct codes only on laptopts for which
> they are known.
> 
> This patch was originally developed by Pali Rohár; later Giovanni
> Mascellani implemented the whitelist.
> 
> Signed-off-by: Giovanni Mascellani <gio@xxxxxxxxxx>
> Co-Developer-by: Pali Rohár <pali.rohar@xxxxxxxxx>

This patch is fine for me now. I'm not sure if Co-Developer-by: tag is
supported, but you can add:

Signed-off-by: Pali Rohár <pali.rohar@xxxxxxxxx>

> ---
>  drivers/hwmon/dell-smm-hwmon.c | 114 ++++++++++++++++++++++++++++++---
>  1 file changed, 104 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
> index 4212d022d253..25d160b36a57 100644
> --- a/drivers/hwmon/dell-smm-hwmon.c
> +++ b/drivers/hwmon/dell-smm-hwmon.c
> @@ -68,6 +68,8 @@ static uint i8k_pwm_mult;
>  static uint i8k_fan_max = I8K_FAN_HIGH;
>  static bool disallow_fan_type_call;
>  static bool disallow_fan_support;
> +static unsigned int manual_fan;
> +static unsigned int auto_fan;
>  
>  #define I8K_HWMON_HAVE_TEMP1	(1 << 0)
>  #define I8K_HWMON_HAVE_TEMP2	(1 << 1)
> @@ -300,6 +302,20 @@ static int i8k_get_fan_nominal_speed(int fan, int speed)
>  	return i8k_smm(&regs) ? : (regs.eax & 0xffff) * i8k_fan_mult;
>  }
>  
> +/*
> + * Enable or disable automatic BIOS fan control support
> + */
> +static int i8k_enable_fan_auto_mode(bool enable)
> +{
> +	struct smm_regs regs = { };
> +
> +	if (disallow_fan_support)
> +		return -EINVAL;
> +
> +	regs.eax = enable ? auto_fan : manual_fan;
> +	return i8k_smm(&regs);
> +}
> +
>  /*
>   * Set the fan speed (off, low, high). Returns the new fan status.
>   */
> @@ -726,6 +742,35 @@ static ssize_t i8k_hwmon_pwm_store(struct device *dev,
>  	return err < 0 ? -EIO : count;
>  }
>  
> +static ssize_t i8k_hwmon_pwm_enable_store(struct device *dev,
> +					  struct device_attribute *attr,
> +					  const char *buf, size_t count)
> +{
> +	int err;
> +	bool enable;
> +	unsigned long val;
> +
> +	if (!auto_fan)
> +		return -ENODEV;
> +
> +	err = kstrtoul(buf, 10, &val);
> +	if (err)
> +		return err;
> +
> +	if (val == 1)
> +		enable = false;
> +	else if (val == 2)
> +		enable = true;
> +	else
> +		return -EINVAL;
> +
> +	mutex_lock(&i8k_mutex);
> +	err = i8k_enable_fan_auto_mode(enable);
> +	mutex_unlock(&i8k_mutex);
> +
> +	return err ? err : count;
> +}
> +
>  static SENSOR_DEVICE_ATTR_RO(temp1_input, i8k_hwmon_temp, 0);
>  static SENSOR_DEVICE_ATTR_RO(temp1_label, i8k_hwmon_temp_label, 0);
>  static SENSOR_DEVICE_ATTR_RO(temp2_input, i8k_hwmon_temp, 1);
> @@ -749,6 +794,7 @@ static SENSOR_DEVICE_ATTR_RO(temp10_label, i8k_hwmon_temp_label, 9);
>  static SENSOR_DEVICE_ATTR_RO(fan1_input, i8k_hwmon_fan, 0);
>  static SENSOR_DEVICE_ATTR_RO(fan1_label, i8k_hwmon_fan_label, 0);
>  static SENSOR_DEVICE_ATTR_RW(pwm1, i8k_hwmon_pwm, 0);
> +static SENSOR_DEVICE_ATTR_WO(pwm1_enable, i8k_hwmon_pwm_enable, 0);
>  static SENSOR_DEVICE_ATTR_RO(fan2_input, i8k_hwmon_fan, 1);
>  static SENSOR_DEVICE_ATTR_RO(fan2_label, i8k_hwmon_fan_label, 1);
>  static SENSOR_DEVICE_ATTR_RW(pwm2, i8k_hwmon_pwm, 1);
> @@ -780,12 +826,13 @@ static struct attribute *i8k_attrs[] = {
>  	&sensor_dev_attr_fan1_input.dev_attr.attr,	/* 20 */
>  	&sensor_dev_attr_fan1_label.dev_attr.attr,	/* 21 */
>  	&sensor_dev_attr_pwm1.dev_attr.attr,		/* 22 */
> -	&sensor_dev_attr_fan2_input.dev_attr.attr,	/* 23 */
> -	&sensor_dev_attr_fan2_label.dev_attr.attr,	/* 24 */
> -	&sensor_dev_attr_pwm2.dev_attr.attr,		/* 25 */
> -	&sensor_dev_attr_fan3_input.dev_attr.attr,	/* 26 */
> -	&sensor_dev_attr_fan3_label.dev_attr.attr,	/* 27 */
> -	&sensor_dev_attr_pwm3.dev_attr.attr,		/* 28 */
> +	&sensor_dev_attr_pwm1_enable.dev_attr.attr,	/* 23 */
> +	&sensor_dev_attr_fan2_input.dev_attr.attr,	/* 24 */
> +	&sensor_dev_attr_fan2_label.dev_attr.attr,	/* 25 */
> +	&sensor_dev_attr_pwm2.dev_attr.attr,		/* 26 */
> +	&sensor_dev_attr_fan3_input.dev_attr.attr,	/* 27 */
> +	&sensor_dev_attr_fan3_label.dev_attr.attr,	/* 28 */
> +	&sensor_dev_attr_pwm3.dev_attr.attr,		/* 29 */
>  	NULL
>  };
>  
> @@ -828,16 +875,19 @@ static umode_t i8k_is_visible(struct kobject *kobj, struct attribute *attr,
>  	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_TEMP10))
>  		return 0;
>  
> -	if (index >= 20 && index <= 22 &&
> +	if (index >= 20 && index <= 23 &&
>  	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_FAN1))
>  		return 0;
> -	if (index >= 23 && index <= 25 &&
> +	if (index >= 24 && index <= 26 &&
>  	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_FAN2))
>  		return 0;
> -	if (index >= 26 && index <= 28 &&
> +	if (index >= 27 && index <= 29 &&
>  	    !(i8k_hwmon_flags & I8K_HWMON_HAVE_FAN3))
>  		return 0;
>  
> +	if (index == 23 && !auto_fan)
> +		return 0;
> +
>  	return attr->mode;
>  }
>  
> @@ -1135,12 +1185,48 @@ static struct dmi_system_id i8k_blacklist_fan_support_dmi_table[] __initdata = {
>  	{ }
>  };
>  
> +struct i8k_fan_control_data {
> +	unsigned int manual_fan;
> +	unsigned int auto_fan;
> +};
> +
> +enum i8k_fan_controls {
> +	I8K_FAN_34A3_35A3,
> +};
> +
> +static const struct i8k_fan_control_data i8k_fan_control_data[] = {
> +	[I8K_FAN_34A3_35A3] = {
> +		.manual_fan = 0x34a3,
> +		.auto_fan = 0x35a3,
> +	},
> +};
> +
> +static struct dmi_system_id i8k_whitelist_fan_control[] __initdata = {
> +	{
> +		.ident = "Dell Precision 5530",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Precision 5530"),
> +		},
> +		.driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3],
> +	},
> +	{
> +		.ident = "Dell Latitude E6440",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> +			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude E6440"),
> +		},
> +		.driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3],
> +	},
> +	{ }
> +};
> +
>  /*
>   * Probe for the presence of a supported laptop.
>   */
>  static int __init i8k_probe(void)
>  {
> -	const struct dmi_system_id *id;
> +	const struct dmi_system_id *id, *fan_control;
>  	int fan, ret;
>  
>  	/*
> @@ -1200,6 +1286,14 @@ static int __init i8k_probe(void)
>  	i8k_fan_max = fan_max ? : I8K_FAN_HIGH;	/* Must not be 0 */
>  	i8k_pwm_mult = DIV_ROUND_UP(255, i8k_fan_max);
>  
> +	fan_control = dmi_first_match(i8k_whitelist_fan_control);
> +	if (fan_control && fan_control->driver_data) {
> +		const struct i8k_fan_control_data *fan_control_data = fan_control->driver_data;
> +		manual_fan = fan_control_data->manual_fan;
> +		auto_fan = fan_control_data->auto_fan;
> +		pr_info("enabling support for setting automatic/manual fan control\n");
> +	}
> +
>  	if (!fan_mult) {
>  		/*
>  		 * Autodetect fan multiplier based on nominal rpm

-- 
Pali Rohár
pali.rohar@xxxxxxxxx

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux