Re: [PATCH v3 1/9] kcsan: Add Kernel Concurrency Sanitizer infrastructure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, 06 Nov 2019, Dmitry Vyukov wrote:

> On Mon, Nov 4, 2019 at 3:28 PM Marco Elver <elver@xxxxxxxxxx> wrote:
> >
> > Kernel Concurrency Sanitizer (KCSAN) is a dynamic data-race detector for
> > kernel space. KCSAN is a sampling watchpoint-based data-race detector.
> > See the included Documentation/dev-tools/kcsan.rst for more details.
> ...
> > +static inline atomic_long_t *find_watchpoint(unsigned long addr, size_t size,
> > +                                            bool expect_write,
> > +                                            long *encoded_watchpoint)
> > +{
> > +       const int slot = watchpoint_slot(addr);
> > +       const unsigned long addr_masked = addr & WATCHPOINT_ADDR_MASK;
> > +       atomic_long_t *watchpoint;
> > +       unsigned long wp_addr_masked;
> > +       size_t wp_size;
> > +       bool is_write;
> > +       int i;
> > +
> > +       BUILD_BUG_ON(CONFIG_KCSAN_NUM_WATCHPOINTS < CHECK_NUM_SLOTS);
> > +
> > +       for (i = 0; i < CHECK_NUM_SLOTS; ++i) {
> > +               watchpoint = &watchpoints[SLOT_IDX(slot, i)];
> 
> 
> The fast path code become much nicer!
> I did another pass looking at how we can optimize the fast path.
> Currently we still have 2 push/pop pairs on the fast path because of
> register pressure. The logic in SLOT_IDX seems to be the main culprit.
> We discussed several options offline:
> 1. Just check 1 slot and ignore all corner cases (we will miss racing
> unaligned access to different addresses but overlapping and crossing
> pages, which sounds pretty esoteric)
> 2. Check 3 slots in order and without wraparound (watchpoints[slot +
> i], where i=-1,0,1), this will require adding dummy slots around the
> array
> 3. An interesting option is to check just 2 slots (that's enough!), to
> make this work we will need to slightly offset bucket number when
> setting a watch point (namely, if an access goes to the very end of a
> page, we set the watchpoint into the bucket corresponding to the
> _next_ page)
> All of these options remove push/pop in my experiments. Obviously
> checking fewer slots will reduce dynamic overhead even more.
> 
> 
> > +               *encoded_watchpoint = atomic_long_read(watchpoint);
> > +               if (!decode_watchpoint(*encoded_watchpoint, &wp_addr_masked,
> > +                                      &wp_size, &is_write))
> > +                       continue;
> > +
> > +               if (expect_write && !is_write)
> > +                       continue;
> > +
> > +               /* Check if the watchpoint matches the access. */
> > +               if (matching_access(wp_addr_masked, wp_size, addr_masked, size))
> > +                       return watchpoint;
> > +       }
> > +
> > +       return NULL;
> > +}
> > +
> > +static inline atomic_long_t *insert_watchpoint(unsigned long addr, size_t size,
> > +                                              bool is_write)
> > +{
> > +       const int slot = watchpoint_slot(addr);
> > +       const long encoded_watchpoint = encode_watchpoint(addr, size, is_write);
> > +       atomic_long_t *watchpoint;
> > +       int i;
> > +
> > +       for (i = 0; i < CHECK_NUM_SLOTS; ++i) {
> > +               long expect_val = INVALID_WATCHPOINT;
> > +
> > +               /* Try to acquire this slot. */
> > +               watchpoint = &watchpoints[SLOT_IDX(slot, i)];
> 
> If we do this SLOT_IDX trickery to catch unaligned accesses crossing
> pages, then I think we should not use it insert_watchpoint at all and
> only set the watchpoint to the exact index. Otherwise, we will
> actually miss the corner cases which defeats the whole purpose of
> SLOT_IDX and 3 iterations.
> 

Just for the record, there are 2 reasons actually I decided to do this:

1. the address slot is already occupied, check if any adjacent slots are
   free;
2. accesses that straddle a slot boundary due to size that exceeds a
   slot's range may check adjacent slots if any watchpoint matches.

In /sys/kernel/debug/kcsan I can see no_capacity with the current version stays
below 10 for kernel boot. When I just use 1 slot, no_capacity events exceed
90000, because point (1) is no longer addressed. This is a problem that would
impair our ability to detect races.  One reason this happens is due to
locality: it is just much more likely that we have multiple accesses to the
same pages during some phase of execution from multiple threads.

To avoid blowing up no_capacity events, insert_watchpoint should not change. I
will change the iteration order in the fast-path (avoiding the complicated
logic), and add additional overflow entries to the watchpoint array.

AFAIK this generates better code, while still addressing points (1) and
(2) above. This should be the best trade-off between absolute
performance and our ability to detect data races.

-- Marco



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux