Hello,
NXP's S32V234[1] ("Treerunner") vision microprocessors are targeted for
high-performance, computationally intensive vision and sensor fusion
applications that require automotive safety levels. They include leading
edge Camera Vision modules like APEX-2, ISP and GPU. The S32V234-EVB and
S32V234-SBC boards are available for customer evaluation.
The following patch series introduces minimal enablement support for the
NXP S32V234-EVB2[2] board, which leverages most of the SoC capabilities.
Up to v2, this series also included the fsl_linflexuart driver, which has
been included in Linux 5.4-rc1[3].
In the future, we aim to submit multiple drivers upstream, which can be
found in the kernel of our Auto Linux BSP[4] ("ALB"), starting with basic
pinmuxing, clock and uSDHC drivers.
For validation, you can use the U-Boot bootloader in the ALB[5], which we
build and test with our patched version of the Linaro GCC 6.3.1 2017.05
toolchain for ARM 64-bit, with sources available on [6].
Changes in v7:
* Rebase the patch 'serial: fsl_linflexuart: Be consistent with the name'
on the tty-next branch in Greg's tty git tree.
Changes in v6:
* In the patch 'serial: fsl_linflexuart: Be consistent with the name',
avoid updating the definition of PORT_LINFLEXUART; that was an
independent fix which has been submitted and accepted[9] separately;
* Avoid using 'base64' as 'Content-Transfer-Encoding'.
Changes in v5:
* Remove the patch 'dt-bindings: serial: Document Freescale LINFlexD UART'
following its acceptance in Linux 5.4-rc1[8];
* Rebase the other patches on v5.4-rc1.
Changes in v4:
* Remove the patch 'serial: fsl_linflexuart: Update compatible string'
following its acceptance[7];
* Rebase the patch 'serial: fsl_linflexuart: Be consistent with the name'
on the tty-next branch in Greg's tty git tree.
Changes in v3:
* Remove the patch 'tty: serial: Add linflexuart driver for S32V234'
following its acceptance[3];
* Replace 'Freescale' with 'NXP' in the ARCH_S32 config definition and the
'model' property from the device tree;
* Remove the 'fsl-' prefixes from the dtsi and dts file names;
* Move the 'model' property from (fsl-)s32v234.dtsi to s32v234-evb.dts;
* Add newlines between the cpu nodes in s32v234.dtsi;
* Make use of GIC_SPI, GIC_PPI, GIC_CPU_MASK_SIMPLE and IRQ_TYPE_* in the
'interrupts' tuples;
* Move the 'timer' and 'interrupt-controller' nodes before 'soc' in
s32v234.dtsi;
* Be consistent with the 'LINFlexD' spelling in documentation, strings and
comments; add new patch 'serial: fsl_linflexuart: Be consistent with the
name' to update the LINFlexD driver as well;
* Remove from fsl,s32-linflexuart.txt a statement regarding the limitation
to UART mode;
* Make the compatible string SoC specific ("fsl,s32v234-linflexuart"); add
new patch 'serial: fsl_linflexuart: Update compatible string' to update
the LINFlexD driver as well;
* In the LINFlexD binding documentation, insert a space between label and
node name and remove the 'status' property.
Changes in v2:
* Update the entry in fsl.yaml to apply to all S32V234 based boards;
* Add chosen node to dts, with a 'stdout-path' property for earlycon;
* Remove linflex_verify_port(), because it was only called from
uart_set_info(), which was going to always fail at the "baud_base < 9600"
check, as we are not using uartclk from uart_port yet;
* Fix compatible string used in OF_EARLYCON_DECLARE.
[1] https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/s32-automotive-platform/vision-processor-for-front-and-surround-view-camera-machine-learning-and-sensor-fusion:S32V234
[2] https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/ultra-reliable-dev-platforms/s32v-mpus-platforms/s32v-vision-and-sensor-fusion-evaluation-system:S32V234EVB
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=09864c1cdf5c537bd01bff45181406e422ea988c
[4] https://source.codeaurora.org/external/autobsps32/linux/
[5] https://source.codeaurora.org/external/autobsps32/u-boot/
[6] https://source.codeaurora.org/external/s32ds/compiler/gcc/
[7] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2bd3661ea0eb2056852cbc58c5d96bb4df2f164f
[8] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0e16feab6cce2b91d2996d4bc4eff01ece577c4a
[9] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9050079719021776e48437827eb9d5986b6e45d4
Eddy Petrișor (1):
dt-bindings: arm: fsl: Add the S32V234-EVB board
Mihaela Martinas (2):
arm64: Introduce config for S32
arm64: defconfig: Enable configs for S32V234
Stefan-Gabriel Mirea (1):
serial: fsl_linflexuart: Be consistent with the name
Stoica Cosmin-Stefan (1):
arm64: dts: fsl: Add device tree for S32V234-EVB
.../admin-guide/kernel-parameters.txt | 2 +-
.../devicetree/bindings/arm/fsl.yaml | 6 +
arch/arm64/Kconfig.platforms | 5 +
arch/arm64/boot/dts/freescale/Makefile | 2 +
arch/arm64/boot/dts/freescale/s32v234-evb.dts | 25 ++++
arch/arm64/boot/dts/freescale/s32v234.dtsi | 139 ++++++++++++++++++
arch/arm64/configs/defconfig | 3 +
drivers/tty/serial/Kconfig | 8 +-
drivers/tty/serial/fsl_linflexuart.c | 4 +-
include/uapi/linux/serial_core.h | 2 +-
10 files changed, 188 insertions(+), 8 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/s32v234-evb.dts
create mode 100644 arch/arm64/boot/dts/freescale/s32v234.dtsi
--
2.22.0
