[PATCH] docs: arm: Fix RAM offset requirement for loading a raw image

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Commit 83d26d1113d8 ("ARM: 7824/1: update advice on kernel, initramfs and
FDT load address.") changed the offset requirement for loading a raw kernel
image into RAM from 32KiB (0x8000) to TEXT_OFFSET - PAGE_OFFSET, which
results in a negative value. Change the offset to be TEXT_OFFSET, which has
an arch dependent value between 0x8000 and 0x308000.

Signed-off-by: Alexandru Elisei <alexandru.elisei@xxxxxxx>
---
 Documentation/arm/booting.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/arm/booting.rst b/Documentation/arm/booting.rst
index 4babb6c6ae1e..0507e7e3357e 100644
--- a/Documentation/arm/booting.rst
+++ b/Documentation/arm/booting.rst
@@ -178,8 +178,8 @@ prior to decompression, which will make the boot process slightly
 faster.
 
 When booting a raw (non-zImage) kernel the constraints are tighter.
-In this case the kernel must be loaded at an offset into system equal
-to TEXT_OFFSET - PAGE_OFFSET.
+In this case the kernel must be loaded at an offset into system RAM
+equal to TEXT_OFFSET.
 
 In any case, the following conditions must be met:
 
-- 
2.7.4




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux