Re: [PATCH v5 2/2] hwmon: pmbus: Add Inspur Power System power supply driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8/16/19, 3:20 AM, "openbmc on behalf of John Wang" <openbmc-bounces+vijaykhemka=fb.com@xxxxxxxxxxxxxxxx on behalf of wangzqbj@xxxxxxxxxx> wrote:

    Add the driver to monitor Inspur Power System power supplies
    with hwmon over pmbus.
    
    This driver adds sysfs attributes for additional power supply data,
    including vendor, model, part_number, serial number,
    firmware revision, hardware revision, and psu mode(active/standby).
    
    Signed-off-by: John Wang <wangzqbj@xxxxxxxxxx>
    ---
    v5:
        - Align sysfs attrs description in inspur-ipsps1.rst
          (Use tab instead of space to sperate names and values)
    v4:
        - Remove the additional tabs in the Makefile
        - Rebased on 5.3-rc4, not 5.2
    v3:
        - Sort kconfig/makefile entries alphabetically
        - Remove unnecessary initialization
        - Use ATTRIBUTE_GROUPS instead of expanding directly
        - Use memscan to avoid reimplementation
    v2:
        - Fix typos in commit message
        - Invert Christmas tree
        - Configure device with sysfs attrs, not debugfs entries
        - Fix errno in fw_version_read, ENODATA to EPROTO
        - Change the print format of fw-version
        - Use sysfs_streq instead of strcmp("xxx" "\n", "xxx")
        - Document sysfs attributes
    ---
     Documentation/hwmon/inspur-ipsps1.rst |  79 +++++++++
     drivers/hwmon/pmbus/Kconfig           |   9 +
     drivers/hwmon/pmbus/Makefile          |   1 +
     drivers/hwmon/pmbus/inspur-ipsps.c    | 226 ++++++++++++++++++++++++++
     4 files changed, 315 insertions(+)
     create mode 100644 Documentation/hwmon/inspur-ipsps1.rst
     create mode 100644 drivers/hwmon/pmbus/inspur-ipsps.c
    
    diff --git a/Documentation/hwmon/inspur-ipsps1.rst b/Documentation/hwmon/inspur-ipsps1.rst
    new file mode 100644
    index 000000000000..2b871ae3448f
    --- /dev/null
    +++ b/Documentation/hwmon/inspur-ipsps1.rst
    @@ -0,0 +1,79 @@
    +Kernel driver inspur-ipsps1
    +=======================
    +
    +Supported chips:
    +
    +  * Inspur Power System power supply unit
    +
    +Author: John Wang <wangzqbj@xxxxxxxxxx>
    +
    +Description
    +-----------
    +
    +This driver supports Inspur Power System power supplies. This driver
    +is a client to the core PMBus driver.
    +
    +Usage Notes
    +-----------
    +
    +This driver does not auto-detect devices. You will have to instantiate the
    +devices explicitly. Please see Documentation/i2c/instantiating-devices for
    +details.
    +
    +Sysfs entries
    +-------------
    +
    +The following attributes are supported:
    +
    +======================= ======================================================
    +curr1_input		Measured input current
    +curr1_label		"iin"
    +curr1_max		Maximum current
    +curr1_max_alarm		Current high alarm
    +curr2_input		Measured output current in mA.
    +curr2_label		"iout1"
    +curr2_crit		Critical maximum current
    +curr2_crit_alarm	Current critical high alarm
    +curr2_max		Maximum current
    +curr2_max_alarm		Current high alarm
    +
    +fan1_alarm		Fan 1 warning.
    +fan1_fault		Fan 1 fault.
    +fan1_input		Fan 1 speed in RPM.
    +
    +in1_alarm		Input voltage under-voltage alarm.
    +in1_input		Measured input voltage in mV.
    +in1_label		"vin"
    +in2_input		Measured output voltage in mV.
    +in2_label		"vout1"
    +in2_lcrit		Critical minimum output voltage
    +in2_lcrit_alarm		Output voltage critical low alarm
    +in2_max			Maximum output voltage
    +in2_max_alarm		Output voltage high alarm
    +in2_min			Minimum output voltage
    +in2_min_alarm		Output voltage low alarm
    +
    +power1_alarm		Input fault or alarm.
    +power1_input		Measured input power in uW.
    +power1_label		"pin"
    +power1_max		Input power limit
    +power2_max_alarm	Output power high alarm
    +power2_max		Output power limit
    +power2_input		Measured output power in uW.
    +power2_label		"pout"
    +
    +temp[1-3]_input		Measured temperature
    +temp[1-2]_max		Maximum temperature
    +temp[1-3]_max_alarm	Temperature high alarm
    +
    +vendor			Manufacturer name
    +model			Product model
    +part_number		Product part number
    +serial_number		Product serial number
    +fw_version		Firmware version
    +hw_version		Hardware version
    +mode			Work mode. Can be set to active or
    +			standby, when set to standby, PSU will
    +			automatically switch between standby
    +			and redundancy mode.
I don't think it is aligned yet. Please use space only instead of tabs.

    +======================= ======================================================
    diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
    index b6588483fae1..d62d69bb7e49 100644
    --- a/drivers/hwmon/pmbus/Kconfig
    +++ b/drivers/hwmon/pmbus/Kconfig
    @@ -46,6 +46,15 @@ config SENSORS_IBM_CFFPS
     	  This driver can also be built as a module. If so, the module will
     	  be called ibm-cffps.
     
    +config SENSORS_INSPUR_IPSPS
    +	tristate "INSPUR Power System Power Supply"
    +	help
    +	  If you say yes here you get hardware monitoring support for the INSPUR
    +	  Power System power supply.
    +
    +	  This driver can also be built as a module. If so, the module will
    +	  be called inspur-ipsps.
    +
     config SENSORS_IR35221
     	tristate "Infineon IR35221"
     	help
    diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
    index c950ea9a5d00..03bacfcfd660 100644
    --- a/drivers/hwmon/pmbus/Makefile
    +++ b/drivers/hwmon/pmbus/Makefile
    @@ -7,6 +7,7 @@ obj-$(CONFIG_PMBUS)		+= pmbus_core.o
     obj-$(CONFIG_SENSORS_PMBUS)	+= pmbus.o
     obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
     obj-$(CONFIG_SENSORS_IBM_CFFPS)	+= ibm-cffps.o
    +obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
     obj-$(CONFIG_SENSORS_IR35221)	+= ir35221.o
     obj-$(CONFIG_SENSORS_IR38064)	+= ir38064.o
     obj-$(CONFIG_SENSORS_IRPS5401)	+= irps5401.o
    diff --git a/drivers/hwmon/pmbus/inspur-ipsps.c b/drivers/hwmon/pmbus/inspur-ipsps.c
    new file mode 100644
    index 000000000000..fa981b881a60
    --- /dev/null
    +++ b/drivers/hwmon/pmbus/inspur-ipsps.c
    @@ -0,0 +1,226 @@
    +// SPDX-License-Identifier: GPL-2.0-or-later
    +/*
    + * Copyright 2019 Inspur Corp.
    + */
    +
    +#include <linux/debugfs.h>
    +#include <linux/device.h>
    +#include <linux/fs.h>
    +#include <linux/i2c.h>
    +#include <linux/module.h>
    +#include <linux/pmbus.h>
    +#include <linux/hwmon-sysfs.h>
    +
    +#include "pmbus.h"
    +
    +#define IPSPS_REG_VENDOR_ID	0x99
    +#define IPSPS_REG_MODEL		0x9A
    +#define IPSPS_REG_FW_VERSION	0x9B
    +#define IPSPS_REG_PN		0x9C
    +#define IPSPS_REG_SN		0x9E
    +#define IPSPS_REG_HW_VERSION	0xB0
    +#define IPSPS_REG_MODE		0xFC
    +
    +#define MODE_ACTIVE		0x55
    +#define MODE_STANDBY		0x0E
    +#define MODE_REDUNDANCY		0x00
    +
    +#define MODE_ACTIVE_STRING		"active"
    +#define MODE_STANDBY_STRING		"standby"
    +#define MODE_REDUNDANCY_STRING		"redundancy"
    +
    +enum ipsps_index {
    +	vendor,
    +	model,
    +	fw_version,
    +	part_number,
    +	serial_number,
    +	hw_version,
    +	mode,
    +	num_regs,
    +};
    +
    +static const u8 ipsps_regs[num_regs] = {
    +	[vendor] = IPSPS_REG_VENDOR_ID,
    +	[model] = IPSPS_REG_MODEL,
    +	[fw_version] = IPSPS_REG_FW_VERSION,
    +	[part_number] = IPSPS_REG_PN,
    +	[serial_number] = IPSPS_REG_SN,
    +	[hw_version] = IPSPS_REG_HW_VERSION,
    +	[mode] = IPSPS_REG_MODE,
    +};
    +
    +static ssize_t ipsps_string_show(struct device *dev,
    +				 struct device_attribute *devattr,
    +				 char *buf)
    +{
    +	u8 reg;
    +	int rc;
    +	char *p;
    +	char data[I2C_SMBUS_BLOCK_MAX + 1];
    +	struct i2c_client *client = to_i2c_client(dev->parent);
    +	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    +
    +	reg = ipsps_regs[attr->index];
    +	rc = i2c_smbus_read_block_data(client, reg, data);
    +	if (rc < 0)
    +		return rc;
    +
    +	/* filled with printable characters, ending with # */
    +	p = memscan(data, '#', rc);
    +	*p = '\0';
    +
    +	return snprintf(buf, PAGE_SIZE, "%s\n", data);
    +}
    +
    +static ssize_t ipsps_fw_version_show(struct device *dev,
    +				     struct device_attribute *devattr,
    +				     char *buf)
    +{
    +	u8 reg;
    +	int rc;
    +	u8 data[I2C_SMBUS_BLOCK_MAX] = { 0 };
    +	struct i2c_client *client = to_i2c_client(dev->parent);
    +	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    +
    +	reg = ipsps_regs[attr->index];
    +	rc = i2c_smbus_read_block_data(client, reg, data);
    +	if (rc < 0)
    +		return rc;
    +
    +	if (rc != 6)
    +		return -EPROTO;
    +
    +	return snprintf(buf, PAGE_SIZE, "%u.%02u%u-%u.%02u\n",
    +			data[1], data[2]/* < 100 */, data[3]/*< 10*/,
    +			data[4], data[5]/* < 100 */);
    +}
    +
    +static ssize_t ipsps_mode_show(struct device *dev,
    +			       struct device_attribute *devattr, char *buf)
    +{
    +	u8 reg;
    +	int rc;
    +	struct i2c_client *client = to_i2c_client(dev->parent);
    +	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    +
    +	reg = ipsps_regs[attr->index];
    +	rc = i2c_smbus_read_byte_data(client, reg);
    +	if (rc < 0)
    +		return rc;
    +
    +	switch (rc) {
    +	case MODE_ACTIVE:
    +		return snprintf(buf, PAGE_SIZE, "[%s] %s %s\n",
    +				MODE_ACTIVE_STRING,
    +				MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
    +	case MODE_STANDBY:
    +		return snprintf(buf, PAGE_SIZE, "%s [%s] %s\n",
    +				MODE_ACTIVE_STRING,
    +				MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
    +	case MODE_REDUNDANCY:
    +		return snprintf(buf, PAGE_SIZE, "%s %s [%s]\n",
    +				MODE_ACTIVE_STRING,
    +				MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
    +	default:
    +		return snprintf(buf, PAGE_SIZE, "unspecified\n");
    +	}
    +}
    +
    +static ssize_t ipsps_mode_store(struct device *dev,
    +				struct device_attribute *devattr,
    +				const char *buf, size_t count)
    +{
    +	u8 reg;
    +	int rc;
    +	struct i2c_client *client = to_i2c_client(dev->parent);
    +	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
    +
    +	reg = ipsps_regs[attr->index];
    +	if (sysfs_streq(MODE_STANDBY_STRING, buf)) {
    +		rc = i2c_smbus_write_byte_data(client, reg,
    +					       MODE_STANDBY);
    +		if (rc < 0)
    +			return rc;
    +		return count;
    +	} else if (sysfs_streq(MODE_ACTIVE_STRING, buf)) {
    +		rc = i2c_smbus_write_byte_data(client, reg,
    +					       MODE_ACTIVE);
    +		if (rc < 0)
    +			return rc;
    +		return count;
    +	}
    +
    +	return -EINVAL;
    +}
    +
    +static SENSOR_DEVICE_ATTR_RO(vendor, ipsps_string, vendor);
    +static SENSOR_DEVICE_ATTR_RO(model, ipsps_string, model);
    +static SENSOR_DEVICE_ATTR_RO(part_number, ipsps_string, part_number);
    +static SENSOR_DEVICE_ATTR_RO(serial_number, ipsps_string, serial_number);
    +static SENSOR_DEVICE_ATTR_RO(hw_version, ipsps_string, hw_version);
    +static SENSOR_DEVICE_ATTR_RO(fw_version, ipsps_fw_version, fw_version);
    +static SENSOR_DEVICE_ATTR_RW(mode, ipsps_mode, mode);
    +
    +static struct attribute *ipsps_attrs[] = {
    +	&sensor_dev_attr_vendor.dev_attr.attr,
    +	&sensor_dev_attr_model.dev_attr.attr,
    +	&sensor_dev_attr_part_number.dev_attr.attr,
    +	&sensor_dev_attr_serial_number.dev_attr.attr,
    +	&sensor_dev_attr_hw_version.dev_attr.attr,
    +	&sensor_dev_attr_fw_version.dev_attr.attr,
    +	&sensor_dev_attr_mode.dev_attr.attr,
    +	NULL,
    +};
    +
    +ATTRIBUTE_GROUPS(ipsps);
    +
    +static struct pmbus_driver_info ipsps_info = {
    +	.pages = 1,
    +	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
    +		PMBUS_HAVE_IIN | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN |
    +		PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
    +		PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
    +		PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
    +		PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
    +	.groups = ipsps_groups,
    +};
    +
    +static struct pmbus_platform_data ipsps_pdata = {
    +	.flags = PMBUS_SKIP_STATUS_CHECK,
    +};
    +
    +static int ipsps_probe(struct i2c_client *client,
    +		       const struct i2c_device_id *id)
    +{
    +	client->dev.platform_data = &ipsps_pdata;
    +	return pmbus_do_probe(client, id, &ipsps_info);
    +}
    +
    +static const struct i2c_device_id ipsps_id[] = {
    +	{ "inspur_ipsps1", 0 },
    +	{}
    +};
    +MODULE_DEVICE_TABLE(i2c, ipsps_id);
    +
    +static const struct of_device_id ipsps_of_match[] = {
    +	{ .compatible = "inspur,ipsps1" },
    +	{}
    +};
    +MODULE_DEVICE_TABLE(of, ipsps_of_match);
    +
    +static struct i2c_driver ipsps_driver = {
    +	.driver = {
    +		.name = "inspur-ipsps",
    +		.of_match_table = ipsps_of_match,
    +	},
    +	.probe = ipsps_probe,
    +	.remove = pmbus_do_remove,
    +	.id_table = ipsps_id,
    +};
    +
    +module_i2c_driver(ipsps_driver);
    +
    +MODULE_AUTHOR("John Wang");
    +MODULE_DESCRIPTION("PMBus driver for Inspur Power System power supplies");
    +MODULE_LICENSE("GPL");
    -- 
    2.17.1
    
    





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux