[PATCH v14 12/13] MIPS: GCW0: Reduce system timer and clocksource to 750 kHz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The default clock (12 MHz) is too fast for the system timer.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx>
Tested-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
---

Notes:
    v8: New patch
    
    v9: Don't configure clock timer1, as the OS Timer is used as
    	clocksource on this SoC
    
    v10: Revert back to v8 bahaviour. Let the user choose what
    	 clocksource should be used.
    
    v11: No change
    
    v12: Move clocksource to channel 2, as channel 1 is used as PWM
    	 for the backlight.
    
    v13-v14: No change

 arch/mips/boot/dts/ingenic/gcw0.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts
index 35f0291e8d38..f58d239c2058 100644
--- a/arch/mips/boot/dts/ingenic/gcw0.dts
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 
 #include "jz4770.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
 
 / {
 	compatible = "gcw,zero", "ingenic,jz4770";
@@ -60,3 +61,12 @@
 	/* The WiFi module is connected to the UHC. */
 	status = "okay";
 };
+
+&tcu {
+	/* 750 kHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+	assigned-clock-rates = <750000>, <750000>;
+
+	/* PWM1 is in use, so reserve channel #2 for the clocksource */
+	ingenic,pwm-channels-mask = <0xfa>;
+};
-- 
2.21.0.593.g511ec345e18




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux