Added MMIO interface to read/write specific offsets in PUNIT PCI device
which export core priortization. This MMIO interface can be used using
ioctl interface on /dev/isst_interface using IOCTL ISST_IF_IO_CMD.
This MMIO interface is used by the intel-speed-select tool under
tools/x86/power to enumerate and set core priority. The MMIO offsets and
semantics of the message can be checked from the source code of the tool.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
---
.../x86/intel_speed_select_if/Makefile | 1 +
.../intel_speed_select_if/isst_if_common.c | 6 +
.../intel_speed_select_if/isst_if_common.h | 2 +
.../x86/intel_speed_select_if/isst_if_mmio.c | 131 ++++++++++++++++++
include/uapi/linux/isst_if.h | 33 +++++
5 files changed, 173 insertions(+)
create mode 100644 drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
diff --git a/drivers/platform/x86/intel_speed_select_if/Makefile b/drivers/platform/x86/intel_speed_select_if/Makefile
index c12687672fc9..7e94919208d3 100644
--- a/drivers/platform/x86/intel_speed_select_if/Makefile
+++ b/drivers/platform/x86/intel_speed_select_if/Makefile
@@ -5,3 +5,4 @@
#
obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_common.o
+obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += isst_if_mmio.o
diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_common.c b/drivers/platform/x86/intel_speed_select_if/isst_if_common.c
index 72e74d72724b..3f96a3925bc6 100644
--- a/drivers/platform/x86/intel_speed_select_if/isst_if_common.c
+++ b/drivers/platform/x86/intel_speed_select_if/isst_if_common.c
@@ -206,6 +206,7 @@ static long isst_if_def_ioctl(struct file *file, unsigned int cmd,
{
void __user *argp = (void __user *)arg;
struct isst_if_cmd_cb cmd_cb;
+ struct isst_if_cmd_cb *cb;
long ret = -ENOTTY;
switch (cmd) {
@@ -218,6 +219,11 @@ static long isst_if_def_ioctl(struct file *file, unsigned int cmd,
cmd_cb.cmd_callback = isst_if_proc_phyid_req;
ret = isst_if_exec_multi_cmd(argp, &cmd_cb);
break;
+ case ISST_IF_IO_CMD:
+ cb = &punit_callbacks[ISST_IF_DEV_MMIO];
+ if (cb->registered)
+ ret = isst_if_exec_multi_cmd(argp, cb);
+ break;
default:
break;
}
diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h b/drivers/platform/x86/intel_speed_select_if/isst_if_common.h
index dade77c58b22..cdc7d019748a 100644
--- a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h
+++ b/drivers/platform/x86/intel_speed_select_if/isst_if_common.h
@@ -10,6 +10,8 @@
#ifndef __ISST_IF_COMMON_H
#define __ISST_IF_COMMON_H
+#define INTEL_RAPL_PRIO_DEVID_0 0x3451
+
/*
* Validate maximum commands in a single request.
* This is enough to handle command to every core in one ioctl, or all
diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
new file mode 100644
index 000000000000..1c25a1235b9e
--- /dev/null
+++ b/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Speed Select Interface: MMIO Interface
+ * Copyright (c) 2019, Intel Corporation.
+ * All rights reserved.
+ *
+ * Author: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sched/signal.h>
+#include <linux/uaccess.h>
+#include <uapi/linux/isst_if.h>
+
+#include "isst_if_common.h"
+
+struct isst_if_device {
+ void __iomem *punit_mmio;
+ struct mutex mutex;
+};
+
+static long isst_if_mmio_rd_wr(u8 *cmd_ptr, int *write_only, int resume)
+{
+ struct isst_if_device *punit_dev;
+ struct isst_if_io_reg *io_reg;
+ struct pci_dev *pdev;
+
+ io_reg = (struct isst_if_io_reg *)cmd_ptr;
+ if (io_reg->reg < 0x04 || io_reg->reg > 0xD0)
+ return -EINVAL;
+
+ if (io_reg->read_write && !capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ pdev = isst_if_get_pci_dev(io_reg->logical_cpu, 0, 0, 1);
+ if (!pdev)
+ return -EINVAL;
+
+ punit_dev = pci_get_drvdata(pdev);
+ if (!punit_dev)
+ return -EINVAL;
+
+ /*
+ * Ensure that operation is complete on a PCI device to avoid read
+ * write race by using per PCI device mutex.
+ */
+ mutex_lock(&punit_dev->mutex);
+ if (io_reg->read_write) {
+ writel(io_reg->value, punit_dev->punit_mmio+io_reg->reg);
+ *write_only = 1;
+ } else {
+ io_reg->value = readl(punit_dev->punit_mmio+io_reg->reg);
+ *write_only = 0;
+ }
+ mutex_unlock(&punit_dev->mutex);
+
+ return 0;
+}
+
+static const struct pci_device_id isst_if_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, INTEL_RAPL_PRIO_DEVID_0)},
+ { 0 },
+};
+MODULE_DEVICE_TABLE(pci, isst_if_ids);
+
+static int isst_if_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct isst_if_device *punit_dev;
+ struct isst_if_cmd_cb cb;
+ u32 mmio_base, pcu_base;
+ u64 base_addr;
+ int ret;
+
+ punit_dev = devm_kzalloc(&pdev->dev, sizeof(*punit_dev), GFP_KERNEL);
+ if (!punit_dev)
+ return -ENOMEM;
+
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ ret = pci_read_config_dword(pdev, 0xD0, &mmio_base);
+ if (ret)
+ return ret;
+
+ ret = pci_read_config_dword(pdev, 0xFC, &pcu_base);
+ if (ret)
+ return ret;
+
+ pcu_base &= GENMASK(10, 0);
+ base_addr = (u64)mmio_base << 23 | (u64) pcu_base << 12;
+ punit_dev->punit_mmio = devm_ioremap(&pdev->dev, base_addr, 256);
+ if (!punit_dev->punit_mmio)
+ return -ENOMEM;
+
+ mutex_init(&punit_dev->mutex);
+ pci_set_drvdata(pdev, punit_dev);
+
+ memset(&cb, 0, sizeof(cb));
+ cb.cmd_size = sizeof(struct isst_if_io_reg);
+ cb.offset = offsetof(struct isst_if_io_regs, io_reg);
+ cb.cmd_callback = isst_if_mmio_rd_wr;
+ cb.owner = THIS_MODULE;
+ ret = isst_if_cdev_register(ISST_IF_DEV_MMIO, &cb);
+ if (ret)
+ mutex_destroy(&punit_dev->mutex);
+
+ return ret;
+}
+
+static void isst_if_remove(struct pci_dev *pdev)
+{
+ struct isst_if_device *punit_dev;
+
+ punit_dev = pci_get_drvdata(pdev);
+ isst_if_cdev_unregister(ISST_IF_DEV_MBOX);
+ mutex_destroy(&punit_dev->mutex);
+}
+
+static struct pci_driver isst_if_pci_driver = {
+ .name = "isst_if_pci",
+ .id_table = isst_if_ids,
+ .probe = isst_if_probe,
+ .remove = isst_if_remove,
+};
+
+module_pci_driver(isst_if_pci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel speed select interface mmio driver");
diff --git a/include/uapi/linux/isst_if.h b/include/uapi/linux/isst_if.h
index 15d1f286a830..fe2492ade078 100644
--- a/include/uapi/linux/isst_if.h
+++ b/include/uapi/linux/isst_if.h
@@ -63,7 +63,40 @@ struct isst_if_cpu_maps {
struct isst_if_cpu_map cpu_map[1];
};
+/**
+ * struct isst_if_io_reg - Read write PUNIT IO register
+ * @read_write: Value 0: Read, 1: Write
+ * @logical_cpu: Logical CPU number to get target PCI device.
+ * @reg: PUNIT register offset
+ * @value: For write operation value to write and for
+ * for read placeholder read value
+ *
+ * Structure to specify read/write data to PUNIT registers.
+ */
+struct isst_if_io_reg {
+ __u32 read_write; /* Read:0, Write:1 */
+ __u32 logical_cpu;
+ __u32 reg;
+ __u32 value;
+};
+
+/**
+ * struct isst_if_io_regs - structure for IO register commands
+ * @cmd_count: Number of io reg commands in io_reg[]
+ * @io_reg[]: Holds one or more io_reg command structure
+ *
+ * This structure used with ioctl ISST_IF_IO_CMD to send
+ * one or more read/write commands to PUNIT. Here IOCTL return value
+ * indicates number of requests sent or error number if no requests have
+ * been sent.
+ */
+struct isst_if_io_regs {
+ __u32 req_count;
+ struct isst_if_io_reg io_reg[1];
+};
+
#define ISST_IF_MAGIC 0xFE
#define ISST_IF_GET_PLATFORM_INFO _IOR(ISST_IF_MAGIC, 0, struct isst_if_platform_info *)
#define ISST_IF_GET_PHY_ID _IOWR(ISST_IF_MAGIC, 1, struct isst_if_cpu_map *)
+#define ISST_IF_IO_CMD _IOW(ISST_IF_MAGIC, 2, struct isst_if_io_regs *)
#endif
--
2.17.2
