On Mon, May 13, 2019 at 12:04:23PM -0300, Mauro Carvalho Chehab wrote:
> Em Mon, 13 May 2019 22:19:59 +0800
> Changbin Du <changbin.du@xxxxxxxxx> escreveu:
>
> > This converts the plain text documentation to reStructuredText format and
> > add it to Sphinx TOC tree. No essential content change.
> >
> > Signed-off-by: Changbin Du <changbin.du@xxxxxxxxx>
> > Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> > ---
> > Documentation/PCI/endpoint/index.rst | 1 +
> > ...est-function.txt => pci-test-function.rst} | 34 ++++++++++++-------
> > 2 files changed, 22 insertions(+), 13 deletions(-)
> > rename Documentation/PCI/endpoint/{pci-test-function.txt => pci-test-function.rst} (84%)
> >
> > diff --git a/Documentation/PCI/endpoint/index.rst b/Documentation/PCI/endpoint/index.rst
> > index 3951de9f923c..b680a3fc4fec 100644
> > --- a/Documentation/PCI/endpoint/index.rst
> > +++ b/Documentation/PCI/endpoint/index.rst
> > @@ -9,3 +9,4 @@ PCI Endpoint Framework
> >
> > pci-endpoint
> > pci-endpoint-cfs
> > + pci-test-function
> > diff --git a/Documentation/PCI/endpoint/pci-test-function.txt b/Documentation/PCI/endpoint/pci-test-function.rst
> > similarity index 84%
> > rename from Documentation/PCI/endpoint/pci-test-function.txt
> > rename to Documentation/PCI/endpoint/pci-test-function.rst
> > index 5916f1f592bb..63148df97232 100644
> > --- a/Documentation/PCI/endpoint/pci-test-function.txt
> > +++ b/Documentation/PCI/endpoint/pci-test-function.rst
> > @@ -1,5 +1,10 @@
> > - PCI TEST
> > - Kishon Vijay Abraham I <kishon@xxxxxx>
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +=================
> > +PCI Test Function
> > +=================
> > +
> > +:Author: Kishon Vijay Abraham I <kishon@xxxxxx>
> >
> > Traditionally PCI RC has always been validated by using standard
> > PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards.
> > @@ -23,30 +28,31 @@ The PCI endpoint test device has the following registers:
> > 8) PCI_ENDPOINT_TEST_IRQ_TYPE
> > 9) PCI_ENDPOINT_TEST_IRQ_NUMBER
> >
> > -*) PCI_ENDPOINT_TEST_MAGIC
> > +* PCI_ENDPOINT_TEST_MAGIC
> >
> > This register will be used to test BAR0. A known pattern will be written
> > and read back from MAGIC register to verify BAR0.
> >
> > -*) PCI_ENDPOINT_TEST_COMMAND:
> > +* PCI_ENDPOINT_TEST_COMMAND
> >
> > This register will be used by the host driver to indicate the function
> > that the endpoint device must perform.
> >
> > -Bitfield Description:
> > +Bitfield Description::
> > +
> > Bit 0 : raise legacy IRQ
> > Bit 1 : raise MSI IRQ
> > Bit 2 : raise MSI-X IRQ
> > Bit 3 : read command (read data from RC buffer)
> > Bit 4 : write command (write data to RC buffer)
> > - Bit 5 : copy command (copy data from one RC buffer to another
> > - RC buffer)
> > + Bit 5 : copy command (copy data from one RC buffer to another RC buffer)
>
> Why not use a table instead?
>
hmm, table looks better.
> >
> > -*) PCI_ENDPOINT_TEST_STATUS
> > +* PCI_ENDPOINT_TEST_STATUS
> >
> > This register reflects the status of the PCI endpoint device.
> >
> > -Bitfield Description:
> > +Bitfield Description::
> > +
> > Bit 0 : read success
> > Bit 1 : read fail
> > Bit 2 : write success
> > @@ -57,31 +63,33 @@ Bitfield Description:
> > Bit 7 : source address is invalid
> > Bit 8 : destination address is invalid
>
> Same here.
>
> If you replace the two bitfield descriptions to table:
> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
>
sure.
> >
> > -*) PCI_ENDPOINT_TEST_SRC_ADDR
> > +* PCI_ENDPOINT_TEST_SRC_ADDR
> >
> > This register contains the source address (RC buffer address) for the
> > COPY/READ command.
> >
> > -*) PCI_ENDPOINT_TEST_DST_ADDR
> > +* PCI_ENDPOINT_TEST_DST_ADDR
> >
> > This register contains the destination address (RC buffer address) for
> > the COPY/WRITE command.
> >
> > -*) PCI_ENDPOINT_TEST_IRQ_TYPE
> > +* PCI_ENDPOINT_TEST_IRQ_TYPE
> >
> > This register contains the interrupt type (Legacy/MSI) triggered
> > for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands.
> >
> > Possible types:
> > +
> > - Legacy : 0
> > - MSI : 1
> > - MSI-X : 2
> >
Also take this as table.
> > -*) PCI_ENDPOINT_TEST_IRQ_NUMBER
> > +* PCI_ENDPOINT_TEST_IRQ_NUMBER
> >
> > This register contains the triggered ID interrupt.
> >
> > Admissible values:
> > +
> > - Legacy : 0
> > - MSI : [1 .. 32]
> > - MSI-X : [1 .. 2048]
>
>
>
> Thanks,
> Mauro
--
Cheers,
Changbin Du
