On Mon, Apr 15, 2019 at 3:28 PM Patrick Venture <venture@xxxxxxxxxx> wrote: > > From: Maxim Sloyko <maxims@xxxxxxxxxx> > > Intersil ISL68137 is a digital output 7-phase configurable PWM > controller with an AVSBus interface. > > Signed-off-by: Maxim Sloyko <maxims@xxxxxxxxxx> > Signed-off-by: Robert Lippert <rlippert@xxxxxxxxxx> > Signed-off-by: Patrick Venture <venture@xxxxxxxxxx> I trim out a bunch beneath this, so maybe that's causing corruption? For instance, all the Google footers, etc, is cut out manually. If that's an issue for the patch email hash, I can do that in the commit log -- since it may include the commit message. > --- > v6: > Fix reversed logic bug. > v5: > Drop extra parens > Drop extra parameter check > v4: > Use kstrtobool > Cleanup parens > Use rc instead of temporary int > Delete unnecessary coment > Add remove to driver structure > v3: > Added missing driver documentation > Cleaned up goto statements. > Add missing error check on pmbus_read_word_data > Transitioned to use SENSOR_DEVICE_ATTR_RW > Renamed enabled attribute to enable > Set up an attribute_group for the enable attribute and added to pmbus_info > Removed the boilerplate driver remove method > v2: > Fixed bad header ordering. > v1: > Original new patchset with fixes from Rob Lippert. > --- > Documentation/hwmon/isl68137 | 72 ++++++++++++++ > drivers/hwmon/pmbus/Kconfig | 9 ++ > drivers/hwmon/pmbus/Makefile | 1 + > drivers/hwmon/pmbus/isl68137.c | 169 +++++++++++++++++++++++++++++++++ > 4 files changed, 251 insertions(+) > create mode 100644 Documentation/hwmon/isl68137 > create mode 100644 drivers/hwmon/pmbus/isl68137.c > > diff --git a/Documentation/hwmon/isl68137 b/Documentation/hwmon/isl68137 > new file mode 100644 > index 0000000000000..92e5c5fc5b777 > --- /dev/null > +++ b/Documentation/hwmon/isl68137 > @@ -0,0 +1,72 @@ > +Kernel driver isl68137 > +====================== > + > +Supported chips: > + * Intersil ISL68137 > + Prefix: 'isl68137' > + Addresses scanned: - > + Datasheet: Publicly available at the Intersil website > + https://www.intersil.com/content/dam/Intersil/documents/isl6/isl68137.pdf > + > +Authors: > + Maxim Sloyko <maxims@xxxxxxxxxx> > + Robert Lippert <rlippert@xxxxxxxxxx> > + Patrick Venture <venture@xxxxxxxxxx> > + > +Description > +----------- > + > +Intersil ISL68137 is a digital output 7-phase configurable PWM > +controller with an AVSBus interface. > + > +Usage Notes > +----------- > + > +This driver does not probe for PMBus devices. You will have to instantiate > +devices explicitly. > + > +The ISL68137 AVS operation mode must be enabled/disabled at runtime. > + > +Beyond the normal sysfs pmbus attributes, the driver exposes a control attribute. > + > +Additional Sysfs attributes > +--------------------------- > + > +avs(0|1)_enable Controls the AVS state of each rail. > + > +curr1_label "iin" > +curr1_input Measured input current > +curr1_crit Critical maximum current > +curr1_crit_alarm Current critical high alarm > + > +curr[2-3]_label "iout[1-2]" > +curr[2-3]_input Measured output current > +curr[2-3]_crit Critical maximum current > +curr[2-3]_crit_alarm Current critical high alarm > + > +in1_label "vin" > +in1_input Measured input voltage > +in1_lcrit Critical minimum input voltage > +in1_lcrit_alarm Input voltage critical low alarm > +in1_crit Critical maximum input voltage > +in1_crit_alarm Input voltage critical high alarm > + > +in[2-3]_label "vout[1-2]" > +in[2-3]_input Measured output voltage > +in[2-3]_lcrit Critical minimum output voltage > +in[2-3]_lcrit_alarm Output voltage critical low alarm > +in[2-3]_crit Critical maximum output voltage > +in[2-3]_crit_alarm Output voltage critical high alarm > + > +power1_label "pin" > +power1_input Measured input power > +power1_alarm Input power high alarm > + > +power[2-3]_label "pout[1-2]" > +power[2-3]_input Measured output power > + > +temp[1-3]_input Measured temperature > +temp[1-3]_crit Critical high temperature > +temp[1-3]_crit_alarm Chip temperature critical high alarm > +temp[1-3]_max Maximum temperature > +temp[1-3]_max_alarm Chip temperature high alarm > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig > index de87abab990e5..7edab7e30eaf9 100644 > --- a/drivers/hwmon/pmbus/Kconfig > +++ b/drivers/hwmon/pmbus/Kconfig > @@ -63,6 +63,15 @@ config SENSORS_IR38064 > This driver can also be built as a module. If so, the module will > be called ir38064. > > +config SENSORS_ISL68137 > + tristate "Intersil ISL68137" > + help > + If you say yes here you get hardware monitoring support for Intersil > + ISL68137. > + > + This driver can also be built as a module. If so, the module will > + be called isl68137. > + > config SENSORS_LM25066 > tristate "National Semiconductor LM25066 and compatibles" > help > diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile > index 7d1fa6b3c8c93..2219b93003167 100644 > --- a/drivers/hwmon/pmbus/Makefile > +++ b/drivers/hwmon/pmbus/Makefile > @@ -9,6 +9,7 @@ obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o > obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o > obj-$(CONFIG_SENSORS_IR35221) += ir35221.o > obj-$(CONFIG_SENSORS_IR38064) += ir38064.o > +obj-$(CONFIG_SENSORS_ISL68137) += isl68137.o > obj-$(CONFIG_SENSORS_LM25066) += lm25066.o > obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o > obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o > diff --git a/drivers/hwmon/pmbus/isl68137.c b/drivers/hwmon/pmbus/isl68137.c > new file mode 100644 > index 0000000000000..515596c92fe1c > --- /dev/null > +++ b/drivers/hwmon/pmbus/isl68137.c > @@ -0,0 +1,169 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Hardware monitoring driver for Intersil ISL68137 > + * > + * Copyright (c) 2017 Google Inc > + * > + */ > + > +#include <linux/err.h> > +#include <linux/hwmon-sysfs.h> > +#include <linux/i2c.h> > +#include <linux/init.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/string.h> > +#include <linux/sysfs.h> > +#include "pmbus.h" > + > +#define ISL68137_VOUT_AVS 0x30 > + > +static ssize_t isl68137_avs_enable_show_page(struct i2c_client *client, > + int page, > + char *buf) > +{ > + int val = pmbus_read_byte_data(client, page, PMBUS_OPERATION); > + > + return sprintf(buf, "%d\n", > + (val & ISL68137_VOUT_AVS) == ISL68137_VOUT_AVS ? 1 : 0); > +} > + > +static ssize_t isl68137_avs_enable_store_page(struct i2c_client *client, > + int page, > + const char *buf, size_t count) > +{ > + int rc, op_val; > + bool result; > + > + rc = kstrtobool(buf, &result); > + if (rc) > + return rc; > + > + op_val = result ? ISL68137_VOUT_AVS : 0; > + > + /* > + * Writes to VOUT setpoint over AVSBus will persist after the VRM is > + * switched to PMBus control. Switching back to AVSBus control > + * restores this persisted setpoint rather than re-initializing to > + * PMBus VOUT_COMMAND. Writing VOUT_COMMAND first over PMBus before > + * enabling AVS control is the workaround. > + */ > + if (op_val == ISL68137_VOUT_AVS) { > + rc = pmbus_read_word_data(client, page, PMBUS_VOUT_COMMAND); > + if (rc < 0) > + return rc; > + > + rc = pmbus_write_word_data(client, page, PMBUS_VOUT_COMMAND, > + rc); > + if (rc < 0) > + return rc; > + } > + > + rc = pmbus_update_byte_data(client, page, PMBUS_OPERATION, > + ISL68137_VOUT_AVS, op_val); > + > + return (rc < 0) ? rc : count; > +} > + > +static ssize_t isl68137_avs_enable_show(struct device *dev, > + struct device_attribute *devattr, > + char *buf) > +{ > + struct i2c_client *client = to_i2c_client(dev->parent); > + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); > + > + return isl68137_avs_enable_show_page(client, attr->index, buf); > +} > + > +static ssize_t isl68137_avs_enable_store(struct device *dev, > + struct device_attribute *devattr, > + const char *buf, size_t count) > +{ > + struct i2c_client *client = to_i2c_client(dev->parent); > + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); > + > + return isl68137_avs_enable_store_page(client, attr->index, buf, count); > +} > + > +static SENSOR_DEVICE_ATTR_RW(avs0_enable, isl68137_avs_enable, 0); > +static SENSOR_DEVICE_ATTR_RW(avs1_enable, isl68137_avs_enable, 1); > + > +static struct attribute *enable_attrs[] = { > + &sensor_dev_attr_avs0_enable.dev_attr.attr, > + &sensor_dev_attr_avs1_enable.dev_attr.attr, > + NULL, > +}; > + > +static const struct attribute_group enable_group = { > + .attrs = enable_attrs, > +}; > + > +static const struct attribute_group *attribute_groups[] = { > + &enable_group, > + NULL, > +}; > + > +static struct pmbus_driver_info isl68137_info = { > + .pages = 2, > + .format[PSC_VOLTAGE_IN] = direct, > + .format[PSC_VOLTAGE_OUT] = direct, > + .format[PSC_CURRENT_IN] = direct, > + .format[PSC_CURRENT_OUT] = direct, > + .format[PSC_POWER] = direct, > + .format[PSC_TEMPERATURE] = direct, > + .m[PSC_VOLTAGE_IN] = 1, > + .b[PSC_VOLTAGE_IN] = 0, > + .R[PSC_VOLTAGE_IN] = 3, > + .m[PSC_VOLTAGE_OUT] = 1, > + .b[PSC_VOLTAGE_OUT] = 0, > + .R[PSC_VOLTAGE_OUT] = 3, > + .m[PSC_CURRENT_IN] = 1, > + .b[PSC_CURRENT_IN] = 0, > + .R[PSC_CURRENT_IN] = 2, > + .m[PSC_CURRENT_OUT] = 1, > + .b[PSC_CURRENT_OUT] = 0, > + .R[PSC_CURRENT_OUT] = 1, > + .m[PSC_POWER] = 1, > + .b[PSC_POWER] = 0, > + .R[PSC_POWER] = 0, > + .m[PSC_TEMPERATURE] = 1, > + .b[PSC_TEMPERATURE] = 0, > + .R[PSC_TEMPERATURE] = 0, > + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN > + | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 > + | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP > + | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT > + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT, > + .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT > + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT, > + .groups = attribute_groups, > +}; > + > +static int isl68137_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + return pmbus_do_probe(client, id, &isl68137_info); > +} > + > +static const struct i2c_device_id isl68137_id[] = { > + {"isl68137", 0}, > + {} > +}; > + > +MODULE_DEVICE_TABLE(i2c, isl68137_id); > + > +/* This is the driver that will be inserted */ > +static struct i2c_driver isl68137_driver = { > + .driver = { > + .name = "isl68137", > + }, > + .probe = isl68137_probe, > + .remove = pmbus_do_remove, > + .id_table = isl68137_id, > +}; > + > +module_i2c_driver(isl68137_driver); > + > +MODULE_AUTHOR("Maxim Sloyko <maxims@xxxxxxxxxx>"); > +MODULE_DESCRIPTION("PMBus driver for Intersil ISL68137"); > +MODULE_LICENSE("GPL"); > -- > 2.21.0.392.gf8f6787159e-goog >
