This commit adds hwmon documents for PECI cputemp and dimmtemp drivers. Cc: Guenter Roeck <linux@xxxxxxxxxxxx> Cc: Jean Delvare <jdelvare@xxxxxxxx> Cc: Jonathan Corbet <corbet@xxxxxxx> Cc: Jason M Biils <jason.m.bills@xxxxxxxxxxxxxxx> Cc: Randy Dunlap <rdunlap@xxxxxxxxxxxxx> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx> Reviewed-by: Haiyue Wang <haiyue.wang@xxxxxxxxxxxxxxx> Reviewed-by: James Feist <james.feist@xxxxxxxxxxxxxxx> Reviewed-by: Vernon Mauery <vernon.mauery@xxxxxxxxxxxxxxx> Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- Documentation/hwmon/peci-cputemp | 78 +++++++++++++++++++++++++++++++ Documentation/hwmon/peci-dimmtemp | 50 ++++++++++++++++++++ 2 files changed, 128 insertions(+) create mode 100644 Documentation/hwmon/peci-cputemp create mode 100644 Documentation/hwmon/peci-dimmtemp diff --git a/Documentation/hwmon/peci-cputemp b/Documentation/hwmon/peci-cputemp new file mode 100644 index 000000000000..821a9258f2e6 --- /dev/null +++ b/Documentation/hwmon/peci-cputemp @@ -0,0 +1,78 @@ +Kernel driver peci-cputemp +========================== + +Supported chips: + One of Intel server CPUs listed below which is connected to a PECI bus. + * Intel Xeon E5/E7 v3 server processors + Intel Xeon E5-14xx v3 family + Intel Xeon E5-24xx v3 family + Intel Xeon E5-16xx v3 family + Intel Xeon E5-26xx v3 family + Intel Xeon E5-46xx v3 family + Intel Xeon E7-48xx v3 family + Intel Xeon E7-88xx v3 family + * Intel Xeon E5/E7 v4 server processors + Intel Xeon E5-16xx v4 family + Intel Xeon E5-26xx v4 family + Intel Xeon E5-46xx v4 family + Intel Xeon E7-48xx v4 family + Intel Xeon E7-88xx v4 family + * Intel Xeon Scalable server processors + Intel Xeon Bronze family + Intel Xeon Silver family + Intel Xeon Gold family + Intel Xeon Platinum family + Addresses scanned: PECI client address 0x30 - 0x37 + Datasheet: Available from http://www.intel.com/design/literature.htm + +Author: + Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx> + +Description +----------- + +This driver implements a generic PECI hwmon feature which provides Digital +Thermal Sensor (DTS) thermal readings of the CPU package and CPU cores that are +accessible using the PECI Client Command Suite via the processor PECI client. + +All temperature values are given in millidegree Celsius and will be measurable +only when the target CPU is powered on. + +sysfs attributes +---------------- + +temp1_label "Die" +temp1_input Provides current die temperature of the CPU package. +temp1_max Provides thermal control temperature of the CPU package + which is also known as Tcontrol. +temp1_crit Provides shutdown temperature of the CPU package which + is also known as the maximum processor junction + temperature, Tjmax or Tprochot. +temp1_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of + the CPU package. + +temp2_label "Tcontrol" +temp2_input Provides current Tcontrol temperature of the CPU + package which is also known as Fan Temperature target. + Indicates the relative value from thermal monitor trip + temperature at which fans should be engaged. +temp2_crit Provides Tcontrol critical value of the CPU package + which is same to Tjmax. + +temp3_label "Tthrottle" +temp3_input Provides current Tthrottle temperature of the CPU + package. Used for throttling temperature. If this value + is allowed and lower than Tjmax - the throttle will + occur and reported at lower than Tjmax. + +temp4_label "Tjmax" +temp4_input Provides the maximum junction temperature, Tjmax of the + CPU package. + +temp[5-*]_label Provides string "Core X", where X is resolved core + number. +temp[5-*]_input Provides current temperature of each core. +temp[5-*]_max Provides thermal control temperature of the core. +temp[5-*]_crit Provides shutdown temperature of the core. +temp[5-*]_crit_hyst Provides the hysteresis value from Tcontrol to Tjmax of + the core. diff --git a/Documentation/hwmon/peci-dimmtemp b/Documentation/hwmon/peci-dimmtemp new file mode 100644 index 000000000000..c54f2526188c --- /dev/null +++ b/Documentation/hwmon/peci-dimmtemp @@ -0,0 +1,50 @@ +Kernel driver peci-dimmtemp +=========================== + +Supported chips: + One of Intel server CPUs listed below which is connected to a PECI bus. + * Intel Xeon E5/E7 v3 server processors + Intel Xeon E5-14xx v3 family + Intel Xeon E5-24xx v3 family + Intel Xeon E5-16xx v3 family + Intel Xeon E5-26xx v3 family + Intel Xeon E5-46xx v3 family + Intel Xeon E7-48xx v3 family + Intel Xeon E7-88xx v3 family + * Intel Xeon E5/E7 v4 server processors + Intel Xeon E5-16xx v4 family + Intel Xeon E5-26xx v4 family + Intel Xeon E5-46xx v4 family + Intel Xeon E7-48xx v4 family + Intel Xeon E7-88xx v4 family + * Intel Xeon Scalable server processors + Intel Xeon Bronze family + Intel Xeon Silver family + Intel Xeon Gold family + Intel Xeon Platinum family + Addresses scanned: PECI client address 0x30 - 0x37 + Datasheet: Available from http://www.intel.com/design/literature.htm + +Author: + Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx> + +Description +----------- + +This driver implements a generic PECI hwmon feature which provides Digital +Thermal Sensor (DTS) thermal readings of DIMM components that are accessible +using the PECI Client Command Suite via the processor PECI client. + +All temperature values are given in millidegree Celsius and will be measurable +only when the target CPU is powered on. + +sysfs attributes +---------------- + +temp[N]_label Provides string "DIMM CI", where C is DIMM channel and + I is DIMM index of the populated DIMM. +temp[N]_input Provides current temperature of the populated DIMM. + +Note: + DIMM temperature attributes will appear when the client CPU's BIOS + completes memory training and testing. -- 2.19.1
