Re: [PATCH v2 01/34] kbuild: Add support for DT binding schema checks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,


On Tue, Dec 4, 2018 at 6:32 AM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> This adds the build infrastructure for checking DT binding schema
> documents and validating dts files using the binding schema.
>
> Check DT binding schema documents:
> make dt_binding_check
>
> Build dts files and check using DT binding schema:
> make dtbs_check
>
> Optionally, DT_SCHEMA_FILES can passed in with a schema file(s) to use
> for validation. This makes it easier to find and fix errors generated by
> a specific schema.
>
> Currently, the validation targets are separate from a normal build to
> avoid a hard dependency on the external DT schema project and because
> there are lots of warnings generated.
>
> Cc: Jonathan Corbet <corbet@xxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
> Cc: Michal Marek <michal.lkml@xxxxxxxxxxx>
> Cc: linux-doc@xxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-kbuild@xxxxxxxxxxxxxxx
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> ---
>  .gitignore                                   |  1 +
>  Documentation/Makefile                       |  2 +-
>  Documentation/devicetree/bindings/.gitignore |  1 +
>  Documentation/devicetree/bindings/Makefile   | 33 ++++++++++++++++++++
>  Makefile                                     | 11 +++++--
>  scripts/Makefile.lib                         | 24 ++++++++++++--
>  6 files changed, 67 insertions(+), 5 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/.gitignore
>  create mode 100644 Documentation/devicetree/bindings/Makefile
>
> diff --git a/.gitignore b/.gitignore
> index 97ba6b79834c..a20ac26aa2f5 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -15,6 +15,7 @@
>  *.bin
>  *.bz2
>  *.c.[012]*.*
> +*.dt.yaml
>  *.dtb
>  *.dtb.S
>  *.dwo
> diff --git a/Documentation/Makefile b/Documentation/Makefile
> index 2ca77ad0f238..9786957c6a35 100644
> --- a/Documentation/Makefile
> +++ b/Documentation/Makefile
> @@ -2,7 +2,7 @@
>  # Makefile for Sphinx documentation
>  #
>
> -subdir-y :=
> +subdir-y := devicetree/bindings/
>
>  # You can set these variables from the command line.
>  SPHINXBUILD   = sphinx-build
> diff --git a/Documentation/devicetree/bindings/.gitignore b/Documentation/devicetree/bindings/.gitignore
> new file mode 100644
> index 000000000000..d9194c02dd08
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/.gitignore
> @@ -0,0 +1 @@
> +*.example.dts
> diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
> new file mode 100644
> index 000000000000..ee0110dd8131
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/Makefile
> @@ -0,0 +1,33 @@
> +# SPDX-License-Identifier: GPL-2.0
> +DT_DOC_CHECKER ?= dt-doc-validate
> +DT_EXTRACT_EX ?= dt-extract-example
> +DT_MK_SCHEMA ?= dt-mk-schema
> +DT_MK_SCHEMA_FLAGS := $(if $(DT_SCHEMA_FILES), -u)
> +
> +quiet_cmd_chk_binding = CHKDT   $<
> +      cmd_chk_binding = (set -e; \
> +                         $(DT_DOC_CHECKER) $< ; \
> +                         mkdir -p $(dir $@) ; \
> +                         $(DT_EXTRACT_EX) $< > $@ )
> +
> +$(obj)/%.example.dts: $(src)/%.yaml FORCE
> +       $(call if_changed,chk_binding)
> +
> +DT_TMP_SCHEMA := .schema.yaml.tmp
> +extra-y += $(DT_TMP_SCHEMA)
> +
> +quiet_cmd_mk_schema = SCHEMA  $@
> +      cmd_mk_schema = mkdir -p $(obj); \
> +                      rm -f $@; \
> +                      $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $<


I think '$<' is wrong.

'$<' is replaced with the first prerequisite.


You can easily check what is happening here.

$ cat   Documentation/devicetree/bindings/..schema.yaml.tmp.cmd
cmd_Documentation/devicetree/bindings/.schema.yaml.tmp := mkdir -p
Documentation/devicetree/bindings; rm -f
Documentation/devicetree/bindings/.schema.yaml.tmp; dt-mk-schema  -o
Documentation/devicetree/bindings/.schema.yaml.tmp
Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml


So, the dt-validater will check only binding from ti,davinci.yaml,
which is almost useless.



If I understand it correctly,
.schema.yaml.tmp should contain all binding yaml.


I fixed it up like follows:

diff --git a/Documentation/devicetree/bindings/Makefile
b/Documentation/devicetree/bindings/Makefile
index ee0110d..267458f 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -19,7 +19,7 @@ extra-y += $(DT_TMP_SCHEMA)
 quiet_cmd_mk_schema = SCHEMA  $@
       cmd_mk_schema = mkdir -p $(obj); \
                       rm -f $@; \
-                      $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $<
+                      $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@
$(filter-out FORCE, $^)

 DT_DOCS = $(shell cd $(srctree)/$(src) && find * -name '*.yaml')
 DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS))



Then, I see another error.


  SCHEMA  Documentation/devicetree/bindings/.schema.yaml.tmp
Traceback (most recent call last):
  File "/home/masahiro/ref/yaml-bindings/tools/dt-mk-schema", line 32,
in <module>
    schemas = dtschema.process_schemas(args.schemas, core_schema=(not
args.useronly))
  File "/usr/local/lib/python3.5/dist-packages/dtschema-0.0.1-py3.5.egg/dtschema/lib.py",
line 359, in process_schemas
    sch = process_schema(os.path.abspath(filename))
  File "/usr/local/lib/python3.5/dist-packages/dtschema-0.0.1-py3.5.egg/dtschema/lib.py",
line 314, in process_schema
    schema = load_schema(filename)
  File "/usr/local/lib/python3.5/dist-packages/dtschema-0.0.1-py3.5.egg/dtschema/lib.py",
line 80, in load_schema
    return yaml.load(f.read())
  File "/usr/lib/python3.5/codecs.py", line 321, in decode
    (result, consumed) = self._buffer_decode(data, self.errors, final)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xd0 in position
0: invalid continuation byte
Documentation/devicetree/bindings/Makefile:33: recipe for target
'Documentation/devicetree/bindings/.schema.yaml.tmp' failed
make[1]: *** [Documentation/devicetree/bindings/.schema.yaml.tmp] Error 1
Makefile:1278: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2







BTW, I cannot build *.dt.yaml



  DTC     arch/arm/boot/dts/alpine-db.dt.yaml
FATAL ERROR: Unknown output format "yaml"
scripts/Makefile.lib:313: recipe for target
'arch/arm/boot/dts/alpine-db.dt.yaml' failed
make[1]: *** [arch/arm/boot/dts/alpine-db.dt.yaml] Error 1
make[1]: *** Deleting file 'arch/arm/boot/dts/alpine-db.dt.yaml'
Makefile:1262: recipe for target 'dtbs_check' failed




I use linux-next.


script/dtc/dtc does not understand '-O yaml'


I also tried the upstream DTC project with no success.


Where can I get dtc with yaml support?





-- 
Best Regards
Masahiro Yamada



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux