Hi,
I have some documentation edits for you to consider:
On 12/5/18 2:59 AM, Kulkarni, Ganapatrao wrote:
> The SoC has PMU support in its L3 cache controller (L3C) and in the
> DDR4 Memory Controller (DMC).
>
> Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@xxxxxxxxxx>
> ---
> Documentation/perf/thunderx2-pmu.txt | 93 ++++++++++++++++++++++++++++
> 1 file changed, 93 insertions(+)
> create mode 100644 Documentation/perf/thunderx2-pmu.txt
>
> diff --git a/Documentation/perf/thunderx2-pmu.txt b/Documentation/perf/thunderx2-pmu.txt
> new file mode 100644
> index 000000000000..f8835bf1068c
> --- /dev/null
> +++ b/Documentation/perf/thunderx2-pmu.txt
> @@ -0,0 +1,93 @@
> +
> +Cavium ThunderX2 SoC Performance Monitoring Unit (PMU UNCORE)
> +==========================================================================
> +
> +ThunderX2 SoC PMU consists of independent system wide per Socket PMUs, such
> +as Level 3 Cache(L3C) and DDR4 Memory Controller(DMC).
> +
> +The DMC has 8 interleaved channels and the L3C has 16 interleaved tiles. Events
> +are counted for default channel(i.e channel 0) and prorated to total number of
for the default channel (i.e. channel 0) and
> +channels/tiles.
> +
> +DMC and L3C supports up to 4 counters. Counters are independently programmable
support
> +and can be started and stopped individually. Each counter can be set to
> +different event. Counters are 32 bit and do not support overflow interrupt;
a different event.
> +they are read every 2 seconds.
> +
> +PMU UNCORE (perf) driver:
> +
> +The thunderx2_pmu driver registers per socket perf PMUs for DMC and L3C devices.
> +Each PMU can be used to count up to 4 events simultaneously. PMUs provide
> +description of its available events and configuration options
> +in sysfs, see /sys/devices/uncore_<l3c_S/dmc_S/>; S is the socket id.
> +
> +The driver does not support sampling, therefore "perf record" will
> +not work. Per-task perf sessions are not supported.
> +
> +Examples:
> +
> +perf stat -a -e uncore_dmc_0/cnt_cycles/ sleep 1
> +
> +perf stat -a -e \
> +uncore_dmc_0/cnt_cycles/,\
> +uncore_dmc_0/data_transfers/,\
> +uncore_dmc_0/read_txns/,\
> +uncore_dmc_0/write_txns/ sleep 1
> +
> +perf stat -a -e \
> +uncore_l3c_0/read_request/,\
> +uncore_l3c_0/read_hit/,\
> +uncore_l3c_0/inv_request/,\
> +uncore_l3c_0/inv_hit/ sleep 1
> +
> +
> +L3C events:
> +============
> +
> +read_request:
> + Number of Read requests received by the L3 Cache.
> + This include Read as well as Read Exclusives.
includes
> +
> +read_hit:
> + Number of Read requests received by the L3 cache that were hit
> + in the L3 (Data provided form the L3)
> +
> +writeback_request:
> + Number of Write Backs received by the L3 Cache. These are basically
> + the L2 Evicts and writes from the PCIe Write Cache.
> +
> +inv_nwrite_request:
> + This is the Number of Invalidate and Write received by the L3 Cache.
Number of Invalidate and Write requests received by the L3 Cache.
> + Also Writes from IO that did not go through the PCIe Write Cache.
> +
> +inv_nwrite_hit
> + This is the Number of Invalidate and Write received by the L3 Cache
Number of Invalidate and Write requests received by the L3 Cache
> + That were a hit in the L3 Cache.
that
> +
> +inv_request:
> + Number of Invalidate request received by the L3 Cache.
requests
> +
> +inv_hit:
> + Number of Invalidate request received by the L3 Cache that were a
requests
> + hit in L3.
> +
> +evict_request:
> + Number of Evicts that the L3 generated.
> +
> +NOTE:
> +1. Granularity of all these events counter value is cache line length(64 Bytes).
event counter values length (64 bytes).
> +2. L3C cache Hit Ratio = (read_hit + inv_nwrite_hit + inv_hit) / (read_request + inv_nwrite_request + inv_request)
> +
> +DMC events:
> +============
> +cnt_cycles:
> + Count cycles (Clocks at the DMC clock rate)
> +
> +write_txns:
> + Number of 64 Bytes write transactions received by the DMC(s)
> +
> +read_txns:
> + Number of 64 Bytes Read transactions received by the DMC(s)
> +
> +data_transfers:
> + Number of 64 Bytes data transferred to or from DRAM.
>
--
~Randy
