Re: [PATCH v8 08/12] mfd: intel-peci-client: Add PECI client MFD driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lee,

On 10/24/2018 3:59 AM, Lee Jones wrote:
On Tue, 18 Sep 2018, Jae Hyun Yoo wrote:

This commit adds PECI client MFD driver.


<snip>

+config MFD_INTEL_PECI_CLIENT
+	bool "Intel PECI client"
+	depends on (PECI || COMPILE_TEST)
+	select MFD_CORE
+	help
+	  If you say yes to this option, support will be included for the
+	  multi-functional Intel PECI (Platform Environment Control Interface)

Remove 'multi-functional' from this sentence.


Will remove the word.

<snip>

+static struct mfd_cell peci_functions[] = {
+	{
+		.name = "peci-cputemp",
+	},
+	{
+		.name = "peci-dimmtemp",
+	},

	{ .name = "peci-cputemp", },
	{ .name = "peci-dimmtemp", },


Will change it like you suggested.

Do these have 2 different drivers?  Where are you putting them?


Yes, these have 2 different drivers as hwmon subsystem drivers.
I submitted them into this patch series.
Patch 10/12: https://lkml.org/lkml/2018/9/18/1524
Patch 11/12: https://lkml.org/lkml/2018/9/18/1523

+	/* TODO: Add additional PECI sideband functions into here */

When will this be done?


I'm hoping it will be done by the end of this year.

+};
+
+static const struct cpu_gen_info cpu_gen_info_table[] = {
+	[CPU_GEN_HSX] = {
+		.family        = 6, /* Family code */
+		.model         = INTEL_FAM6_HASWELL_X,
+		.core_max      = CORE_MAX_ON_HSX,
+		.chan_rank_max = CHAN_RANK_MAX_ON_HSX,
+		.dimm_idx_max  = DIMM_IDX_MAX_ON_HSX },
+	[CPU_GEN_BRX] = {
+		.family        = 6, /* Family code */
+		.model         = INTEL_FAM6_BROADWELL_X,
+		.core_max      = CORE_MAX_ON_BDX,
+		.chan_rank_max = CHAN_RANK_MAX_ON_BDX,
+		.dimm_idx_max  = DIMM_IDX_MAX_ON_BDX },
+	[CPU_GEN_SKX] = {
+		.family        = 6, /* Family code */
+		.model         = INTEL_FAM6_SKYLAKE_X,
+		.core_max      = CORE_MAX_ON_SKX,
+		.chan_rank_max = CHAN_RANK_MAX_ON_SKX,
+		.dimm_idx_max  = DIMM_IDX_MAX_ON_SKX },

The '},'s should go on the line below.


Okay. Will fix it.

+};
+
+static int peci_client_get_cpu_gen_info(struct peci_mfd *priv)

Remove all mention of 'mfd'.  It's not a thing.


Will remove 'mfd'.

+{
+	u32 cpu_id;
+	int i, rc;
+
+	rc = peci_get_cpu_id(priv->adapter, priv->addr, &cpu_id);
+	if (rc)
+		return rc;
+
+	for (i = 0; i < ARRAY_SIZE(cpu_gen_info_table); i++) {
+		if (FIELD_GET(CPU_ID_FAMILY_MASK, cpu_id) +
+			FIELD_GET(CPU_ID_EXT_FAMILY_MASK, cpu_id) ==
+				cpu_gen_info_table[i].family &&
+		    FIELD_GET(CPU_ID_MODEL_MASK, cpu_id) ==
+			FIELD_GET(LOWER_NIBBLE_MASK,
+				  cpu_gen_info_table[i].model) &&
+		    FIELD_GET(CPU_ID_EXT_MODEL_MASK, cpu_id) ==
+			FIELD_GET(UPPER_NIBBLE_MASK,
+				  cpu_gen_info_table[i].model)) {
+			break;
+		}
+	}

This is really read.  Please reformat it, even if you have to use
local variables to make it more legible.


Will reformat it using local variables for better readability as you
suggest.

+	if (i >= ARRAY_SIZE(cpu_gen_info_table))
+		return -ENODEV;

Do you really want to fail silently?


No. I'll add a dev_err printing.

+	priv->gen_info = &cpu_gen_info_table[i];

If you do this in the for(), you can then test priv->gen_info instead
of seeing if the iterator maxed out.  Much nicer I think.


Yes, that would be much nicer. Will fix it.

+	return 0;
+}
+
+bool peci_temp_need_update(struct temp_data *temp)
+{
+	if (temp->valid &&
+	    time_before(jiffies, temp->last_updated + UPDATE_INTERVAL))
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(peci_temp_need_update);
+
+void peci_temp_mark_updated(struct temp_data *temp)
+{
+	temp->valid = 1;
+	temp->last_updated = jiffies;
+}
+EXPORT_SYMBOL_GPL(peci_temp_mark_updated);

These are probably better suited as inline functions to be placed in
a header file.  No need to export them, since they only use their own
data.


Yes, that makes sense. I'll change these to inline functions.

+int peci_client_command(struct peci_mfd *priv, enum peci_cmd cmd, void *vmsg)
+{
+	return peci_command(priv->adapter, cmd, vmsg);
+}
+EXPORT_SYMBOL_GPL(peci_client_command);

If you share the adaptor with the client, you can call peci_command()
directly.  There should also be some locking in here somewhere too.


Yes, the client->adapter can be referenced from child drivers. Will make
them call peci_command() directly.

+int peci_client_rd_pkg_cfg_cmd(struct peci_mfd *priv, u8 mbx_idx,

This is gobbledegook.  What's rd?  Read?


Yes, the 'rd' means 'read'. I intended to keep command names as listed
in the PECI specification such as RdPkgConfig, WrPkgConfig and so on.
Should I change it to 'peci_client_read_package_config_command' ?

+			       u16 param, u8 *data)
+{
+	struct peci_rd_pkg_cfg_msg msg;
+	int rc;
+
+	msg.addr = priv->addr;
+	msg.index = mbx_idx;
+	msg.param = param;
+	msg.rx_len = 4;
+
+	rc = peci_command(priv->adapter, PECI_CMD_RD_PKG_CFG, &msg);
+	if (!rc)
+		memcpy(data, msg.pkg_config, 4);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(peci_client_rd_pkg_cfg_cmd);

This too should be set-up as an inline function, not an exported one.


Will change it to inline function.

+static int peci_client_probe(struct peci_client *client)
+{
+	struct device *dev = &client->dev;
+	struct peci_mfd *priv;
+	int rc;

'ret' is more common.


Will fix it.

+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, priv);
+	priv->client = client;
+	priv->dev = dev;

+	priv->adapter = client->adapter;
+	priv->addr = client->addr;

You're already saving client.  No need to save its individual
attributes as well.


I intended to reduce pointer referencing depth because adapter and addr are frequently used, but you are right. I'll remove adapter and addr from the struct.

+	priv->cpu_no = client->addr - PECI_BASE_ADDR;

This seems clunky.  Does the spec say that the addresses have to be in
numerical order with no gaps?  What if someone chooses to implement 4
CPUs at 0x30, 0x35, 0x45 and 0x60?


The CPU address will be assigned by H/W strap settings in order. Also,
there would be a case of using some CPU slots left empty, so gaps could
be happen on the addresses but it's still acceptable.

What do you then do with cpu_no?


It is being used for child device id parameter when this code calls
devm_mfd_add_devices() below. Also, it is referenced from cputemp and
dimmtemp hwmon drivers but it isn't needed because the hwmon drivers
already know client->addr. I'll change cpu_no as a local variable in here for child device id and will change the hwmon drivers.

+	snprintf(priv->name, PECI_NAME_SIZE, "peci_client.cpu%d", priv->cpu_no);
+
+	rc = peci_client_get_cpu_gen_info(priv);
+	if (rc)
+		return rc;
+
+	rc = devm_mfd_add_devices(priv->dev, priv->cpu_no, peci_functions,
+				  ARRAY_SIZE(peci_functions), NULL, 0, NULL);
+	if (rc < 0) {
+		dev_err(priv->dev, "devm_mfd_add_devices failed: %d\n", rc);

This to too specific.

   "Failed to register child devices"


Will fix it like you suggested.

+		return rc;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id peci_client_of_table[] = {
+	{ .compatible = "intel,peci-client" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, peci_client_of_table);
+#endif
+
+static const struct peci_device_id peci_client_ids[] = {
+	{ .name = "peci-client", .driver_data = 0 },

Remove .driver_data if you're not going to use it.


Okay. I'll remove .driver_data.

+	{ }
+};
+MODULE_DEVICE_TABLE(peci, peci_client_ids);
+
+static struct peci_driver peci_client_driver = {
+	.probe    = peci_client_probe,
+	.id_table = peci_client_ids,
+	.driver   = {
+			.name           = "peci-client",
+			.of_match_table =
+				of_match_ptr(peci_client_of_table),
+	},
+};

Odd tabbing.


Will fix the indentation.

+module_peci_driver(peci_client_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("PECI client MFD driver");

Remove "MFD".


Will remove it.

+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/intel-peci-client.h b/include/linux/mfd/intel-peci-client.h
new file mode 100644
index 000000000000..7ec272cddceb
--- /dev/null
+++ b/include/linux/mfd/intel-peci-client.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018 Intel Corporation */
+
+#ifndef __LINUX_MFD_PECI_CLIENT_H
+#define __LINUX_MFD_PECI_CLIENT_H
+
+#include <linux/peci.h>
+
+#if IS_ENABLED(CONFIG_X86)
+#include <asm/intel-family.h>
+#else
+/**
+ * Architectures other than x86 cannot include the header file so define these
+ * at here. These are needed for detecting type of client x86 CPUs behind a PECI
+ * connection.
+ */
+#define INTEL_FAM6_HASWELL_X   0x3F
+#define INTEL_FAM6_BROADWELL_X 0x4F
+#define INTEL_FAM6_SKYLAKE_X   0x55
+#endif
+
+#define LOWER_NIBBLE_MASK      GENMASK(3, 0)
+#define UPPER_NIBBLE_MASK      GENMASK(7, 4)
+
+#define CPU_ID_MODEL_MASK      GENMASK(7, 4)
+#define CPU_ID_FAMILY_MASK     GENMASK(11, 8)
+#define CPU_ID_EXT_MODEL_MASK  GENMASK(19, 16)
+#define CPU_ID_EXT_FAMILY_MASK GENMASK(27, 20)
+
+#define CORE_MAX_ON_HSX        18 /* Max number of cores on Haswell */
+#define CHAN_RANK_MAX_ON_HSX   8  /* Max number of channel ranks on Haswell */
+#define DIMM_IDX_MAX_ON_HSX    3  /* Max DIMM index per channel on Haswell */
+
+#define CORE_MAX_ON_BDX        24 /* Max number of cores on Broadwell */
+#define CHAN_RANK_MAX_ON_BDX   4  /* Max number of channel ranks on Broadwell */
+#define DIMM_IDX_MAX_ON_BDX    3  /* Max DIMM index per channel on Broadwell */
+
+#define CORE_MAX_ON_SKX        28 /* Max number of cores on Skylake */
+#define CHAN_RANK_MAX_ON_SKX   6  /* Max number of channel ranks on Skylake */
+#define DIMM_IDX_MAX_ON_SKX    2  /* Max DIMM index per channel on Skylake */
+
+#define CORE_NUMS_MAX          CORE_MAX_ON_SKX
+#define CHAN_RANK_MAX          CHAN_RANK_MAX_ON_HSX
+#define DIMM_IDX_MAX           DIMM_IDX_MAX_ON_HSX
+#define DIMM_NUMS_MAX          (CHAN_RANK_MAX * DIMM_IDX_MAX)
+
+#define TEMP_TYPE_PECI         6 /* Sensor type 6: Intel PECI */
+
+#define UPDATE_INTERVAL        HZ
+
+struct temp_data {
+	uint  valid;
+	s32   value;
+	ulong last_updated;
+};

This should not live in here.


Will move it.

+struct cpu_gen_info {
+	u16  family;
+	u8   model;
+	uint core_max;
+	uint chan_rank_max;
+	uint dimm_idx_max;
+};
+
+struct peci_mfd {

Remove "_mfd".


Will remove 'mfd'.

+	struct peci_client *client;
+	struct device *dev;
+	struct peci_adapter *adapter;
+	char name[PECI_NAME_SIZE];

What is this used for?


This isn't needed. Thanks for your pointing out. I'll remove it.

+	u8 addr;
+	uint cpu_no;
+	const struct cpu_gen_info *gen_info;

Where is this used?


It is referenced from cputemp and dimmtemp hwmon drivers to specify CPU
generation.

+};

Both of these structs need kerneldoc headers.


Will add kerneldoc headers.

+bool peci_temp_need_update(struct temp_data *temp);
+void peci_temp_mark_updated(struct temp_data *temp);

These should live in a temperature driver.


Agreed. I'll move it to temperature driver.

Thanks a lot for your careful review. I'll submit a new patch set soon.

Jae

+int  peci_client_command(struct peci_mfd *mfd, enum peci_cmd cmd, void *vmsg);
+int  peci_client_rd_pkg_cfg_cmd(struct peci_mfd *mfd, u8 mbx_idx,
+				u16 param, u8 *data);
+
+#endif /* __LINUX_MFD_PECI_CLIENT_H */




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux