Hi Boris,
On 19-07-2018 16:29, Boris Brezillon wrote:
+int i3c_bus_register(struct i3c_bus *i3cbus)
+{
+ struct i2c_dev_desc *desc;
+
+ i3c_bus_for_each_i2cdev(i3cbus, desc) {
+ switch (desc->boardinfo->lvr & I3C_LVR_I2C_INDEX_MASK) {
+ case I3C_LVR_I2C_INDEX(0):
+ if (i3cbus->mode < I3C_BUS_MODE_MIXED_FAST)
+ i3cbus->mode = I3C_BUS_MODE_MIXED_FAST;
+ break;
+
+ case I3C_LVR_I2C_INDEX(1):
+ case I3C_LVR_I2C_INDEX(2):
+ if (i3cbus->mode < I3C_BUS_MODE_MIXED_SLOW)
+ i3cbus->mode = I3C_BUS_MODE_MIXED_SLOW;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ }
+
+ if (!i3cbus->scl_rate.i3c)
+ i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
+
+ if (!i3cbus->scl_rate.i2c) {
+ if (i3cbus->mode == I3C_BUS_MODE_MIXED_SLOW)
+ i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_SCL_RATE;
+ else
+ i3cbus->scl_rate.i2c = I3C_BUS_I2C_FM_PLUS_SCL_RATE;
+ }
+
+ /*
+ * I3C/I2C frequency may have been overridden, check that user-provided
+ * values are not exceeding max possible frequency.
+ */
+ if (i3cbus->scl_rate.i3c > I3C_BUS_MAX_I3C_SCL_RATE ||
+ i3cbus->scl_rate.i2c > I3C_BUS_I2C_FM_PLUS_SCL_RATE) {
+ return -EINVAL;
+ }
+
+ dev_set_name(&i3cbus->dev, "i3c-%d", i3cbus->id);
+
+ return device_add(&i3cbus->dev);
+}
During the tests of the bus with i2c devices I found the i2c_dev_desc
objects aren't allocated before this function. This cause i3cbus->mode =
I3C_BUS_MODE_PURE.
I want to do something for the slave and secondary master, do you
already have infrastructure that you can share?
Best regards,
Vitor Soares
