Re: [PATCH v6 06/24] clocksource: Add driver for the Ingenic JZ47xx OST

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mathieu,

Le mar. 14 août 2018 à 11:42, Mathieu Malaterre <malat@xxxxxxxxxx> a écrit :
On Thu, Aug 9, 2018 at 11:44 PM Paul Cercueil <paul@xxxxxxxxxxxxxxx> wrote:

 From: Maarten ter Huurne <maarten@xxxxxxxxxxxxxx>

 OST is the OS Timer, a 64-bit timer/counter with buffered reading.

 SoCs before the JZ4770 had (if any) a 32-bit OST; the JZ4770 and
 JZ4780 have a 64-bit OST.

This driver will register both a clocksource and a sched_clock to the
 system.

With CONFIG_DEBUG_SECTION_MISMATCH=y here is what I see:

  MODPOST vmlinux.o
WARNING: vmlinux.o(.data+0x26600): Section mismatch in reference from
the variable ingenic_ost_driver to the function
.init.text:ingenic_ost_probe()
The variable ingenic_ost_driver references
the function __init ingenic_ost_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

WARNING: vmlinux.o(.data+0x26660): Section mismatch in reference from
the variable ingenic_tcu_driver to the function
.init.text:ingenic_tcu_probe()
The variable ingenic_tcu_driver references
the function __init ingenic_tcu_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

Thanks

Right, I'll fix it in V7.
Thanks!

 Signed-off-by: Maarten ter Huurne <maarten@xxxxxxxxxxxxxx>
 Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
 ---
  drivers/clocksource/Kconfig       |   8 ++
  drivers/clocksource/Makefile      |   1 +
drivers/clocksource/ingenic-ost.c | 208 ++++++++++++++++++++++++++++++++++++++
  3 files changed, 217 insertions(+)
  create mode 100644 drivers/clocksource/ingenic-ost.c

  v5: New patch

  v6: - Get rid of SoC IDs; pass pointer to ingenic_ost_soc_info as
        devicetree match data instead.
      - Use device_get_match_data() instead of the of_* variant
      - Handle error of dev_get_regmap() properly

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
 index 98f708208a8d..e855938c69f1 100644
 --- a/drivers/clocksource/Kconfig
 +++ b/drivers/clocksource/Kconfig
 @@ -619,4 +619,12 @@ config INGENIC_TIMER
         help
           Support for the timer/counter unit of the Ingenic JZ SoCs.

 +config INGENIC_OST
 +       bool "Ingenic JZ47xx Operating System Timer"
 +       depends on MIPS || COMPILE_TEST
 +       depends on COMMON_CLK
 +       select INGENIC_TIMER
 +       help
+ Support for the OS Timer of the Ingenic JZ4770 or similar SoC.
 +
  endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
 index 26877505d400..56ce37252944 100644
 --- a/drivers/clocksource/Makefile
 +++ b/drivers/clocksource/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o
  obj-$(CONFIG_H8300_TMR8)               += h8300_timer8.o
  obj-$(CONFIG_H8300_TMR16)              += h8300_timer16.o
  obj-$(CONFIG_H8300_TPU)                        += h8300_tpu.o
 +obj-$(CONFIG_INGENIC_OST)              += ingenic-ost.o
  obj-$(CONFIG_INGENIC_TIMER)            += ingenic-timer.o
  obj-$(CONFIG_CLKSRC_ST_LPC)            += clksrc_st_lpc.o
  obj-$(CONFIG_X86_NUMACHIP)             += numachip.o
diff --git a/drivers/clocksource/ingenic-ost.c b/drivers/clocksource/ingenic-ost.c
 new file mode 100644
 index 000000000000..400d30656790
 --- /dev/null
 +++ b/drivers/clocksource/ingenic-ost.c
 @@ -0,0 +1,208 @@
 +// SPDX-License-Identifier: GPL-2.0
 +/*
 + * JZ47xx SoCs TCU Operating System Timer driver
 + *
 + * Copyright (C) 2016 Maarten ter Huurne <maarten@xxxxxxxxxxxxxx>
 + * Copyright (C) 2018 Paul Cercueil <paul@xxxxxxxxxxxxxxx>
 + */
 +
 +#include <linux/clk.h>
 +#include <linux/clocksource.h>
 +#include <linux/mfd/ingenic-tcu.h>
 +#include <linux/module.h>
 +#include <linux/platform_device.h>
 +#include <linux/pm.h>
 +#include <linux/regmap.h>
 +#include <linux/sched_clock.h>
 +
 +#include "ingenic-timer.h"
 +
 +#define TCU_OST_TCSR_MASK      0xc0
 +#define TCU_OST_TCSR_CNT_MD    BIT(15)
 +
 +#define TCU_OST_CHANNEL                15
 +
 +struct ingenic_ost_soc_info {
 +       bool is64bit;
 +};
 +
 +struct ingenic_ost {
 +       struct regmap *map;
 +       struct clk *clk;
 +
 +       struct clocksource cs;
 +};
 +
 +static u64 notrace ingenic_ost_read_cntl(void)
 +{
+ /* Bypass the regmap here as we must return as soon as possible */
 +       return readl(ingenic_tcu_base + TCU_REG_OST_CNTL);
 +}
 +
 +static u64 notrace ingenic_ost_read_cnth(void)
 +{
+ /* Bypass the regmap here as we must return as soon as possible */
 +       return readl(ingenic_tcu_base + TCU_REG_OST_CNTH);
 +}
 +
+static u64 notrace ingenic_ost_clocksource_read(struct clocksource *cs)
 +{
 +       u32 val1, val2;
 +       u64 count, recount;
 +       s64 diff;
 +
 +       /*
+ * The buffering of the upper 32 bits of the timer prevents wrong + * results from the bottom 32 bits overflowing due to the timer ticking + * along. However, it does not prevent wrong results from simultaneous + * reads of the timer, which could reset the buffer mid-read. + * Since this kind of wrong read can happen only when the bottom bits + * overflow, there will be minutes between wrong reads, so if we read + * twice in succession, at least one of the reads will be correct.
 +        */
 +
+ /* Bypass the regmap here as we must return as soon as possible */
 +       val1 = readl(ingenic_tcu_base + TCU_REG_OST_CNTL);
 +       val2 = readl(ingenic_tcu_base + TCU_REG_OST_CNTHBUF);
 +       count = (u64)val1 | (u64)val2 << 32;
 +
 +       val1 = readl(ingenic_tcu_base + TCU_REG_OST_CNTL);
 +       val2 = readl(ingenic_tcu_base + TCU_REG_OST_CNTHBUF);
 +       recount = (u64)val1 | (u64)val2 << 32;
 +
 +       /*
+ * A wrong read will produce a result that is 1<<32 too high: the bottom + * part from before overflow and the upper part from after overflow. + * Therefore, the lower value of the two reads is the correct value.
 +        */
 +
 +       diff = (s64)(recount - count);
 +       if (unlikely(diff < 0))
 +               count = recount;
 +
 +       return count;
 +}
 +
 +static int __init ingenic_ost_probe(struct platform_device *pdev)
 +{
 +       const struct ingenic_ost_soc_info *soc_info;
 +       struct device *dev = &pdev->dev;
 +       struct ingenic_ost *ost;
 +       struct clocksource *cs;
 +       unsigned long rate, flags;
 +       int err;
 +
 +       soc_info = device_get_match_data(dev);
 +       if (!soc_info)
 +               return -EINVAL;
 +
 +       ost = devm_kzalloc(dev, sizeof(*ost), GFP_KERNEL);
 +       if (!ost)
 +               return -ENOMEM;
 +
 +       ost->map = dev_get_regmap(dev->parent, NULL);
 +       if (!ost->map) {
 +               dev_err(dev, "regmap not found\n");
 +               return -EINVAL;
 +       }
 +
 +       ost->clk = devm_clk_get(dev, "ost");
 +       if (IS_ERR(ost->clk))
 +               return PTR_ERR(ost->clk);
 +
 +       err = clk_prepare_enable(ost->clk);
 +       if (err)
 +               return err;
 +
 +       /* Clear counter high/low registers */
 +       if (soc_info->is64bit)
 +               regmap_write(ost->map, TCU_REG_OST_CNTL, 0);
 +       regmap_write(ost->map, TCU_REG_OST_CNTH, 0);
 +
 +       /* Don't reset counter at compare value. */
 +       regmap_update_bits(ost->map, TCU_REG_OST_TCSR,
 +                          TCU_OST_TCSR_MASK, TCU_OST_TCSR_CNT_MD);
 +
 +       rate = clk_get_rate(ost->clk);
 +
 +       /* Enable OST TCU channel */
 +       regmap_write(ost->map, TCU_REG_TESR, BIT(TCU_OST_CHANNEL));
 +
 +       cs = &ost->cs;
 +       cs->name        = "ingenic-ost";
 +       cs->rating      = 320;
 +       cs->flags       = CLOCK_SOURCE_IS_CONTINUOUS;
 +
 +       if (soc_info->is64bit) {
 +               cs->mask = CLOCKSOURCE_MASK(64);
 +               cs->read = ingenic_ost_clocksource_read;
 +       } else {
 +               cs->mask = CLOCKSOURCE_MASK(32);
+ cs->read = (u64 (*)(struct clocksource *))ingenic_ost_read_cnth;
 +       }
 +
 +       err = clocksource_register_hz(cs, rate);
 +       if (err) {
+ dev_err(dev, "clocksource registration failed: %d\n", err);
 +               clk_disable_unprepare(ost->clk);
 +               return err;
 +       }
 +
 +       /* Cannot register a sched_clock with interrupts on */
 +       local_irq_save(flags);
 +       if (soc_info->is64bit)
+ sched_clock_register(ingenic_ost_read_cntl, 32, rate);
 +       else
+ sched_clock_register(ingenic_ost_read_cnth, 32, rate);
 +       local_irq_restore(flags);
 +
 +       return 0;
 +}
 +
 +#ifdef CONFIG_PM_SLEEP
 +static int ingenic_ost_suspend(struct device *dev)
 +{
 +       struct ingenic_ost *ost = dev_get_drvdata(dev);
 +
 +       clk_disable(ost->clk);
 +       return 0;
 +}
 +
 +static int ingenic_ost_resume(struct device *dev)
 +{
 +       struct ingenic_ost *ost = dev_get_drvdata(dev);
 +
 +       return clk_enable(ost->clk);
 +}
 +
 +static SIMPLE_DEV_PM_OPS(ingenic_ost_pm_ops, ingenic_ost_suspend,
 +                        ingenic_ost_resume);
 +#define INGENIC_OST_PM_OPS (&ingenic_ost_pm_ops)
 +#else
 +#define INGENIC_OST_PM_OPS NULL
 +#endif /* CONFIG_PM_SUSPEND */
 +
 +static const struct ingenic_ost_soc_info jz4725b_ost_soc_info = {
 +       .is64bit = false,
 +};
 +
 +static const struct ingenic_ost_soc_info jz4770_ost_soc_info = {
 +       .is64bit = true,
 +};
 +
 +static const struct of_device_id ingenic_ost_of_match[] = {
+ { .compatible = "ingenic,jz4725b-ost", .data = &jz4725b_ost_soc_info, }, + { .compatible = "ingenic,jz4770-ost", .data = &jz4770_ost_soc_info, },
 +       { }
 +};
 +MODULE_DEVICE_TABLE(of, ingenic_ost_of_match);
 +
 +static struct platform_driver ingenic_ost_driver = {
 +       .probe = ingenic_ost_probe,
 +       .driver = {
 +               .name   = "ingenic-ost",
 +               .pm     = INGENIC_OST_PM_OPS,
 +               .of_match_table = ingenic_ost_of_match,
 +       },
 +};
 +module_platform_driver(ingenic_ost_driver);
 --
 2.11.0






[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux