From: Richard Gong <richard.gong@xxxxxxxxx>
This is the 8th submission of Intel Stratix10 service layer and FPGA manager
driver patches. This submission includes one additional patch for supporting
remote status update, the second Stratix10 service layer client. Intel
Stratix10 FPGA manager, which is 1st Stratix10 service layer client, is
included in this submission.
I have moved the stratix10-smc.h to include/linux since it is being reused.
Header stratix10-smc.h defines a secure messaging protocol that used by
Stratix10 service layer and EDAC/DWMAC drivers for:
1. FPGA programming.
2. RSU (remote status update). This updates some booting parameters that
happen on reboot, before the kernel boots the next time.
3. reading and writing the secure registers.
Stratix10 service layer patches have been reviewed internally by Alan Tull
and other colleagues at Intel.
Some features of the Intel Stratix10 SoC require a level of privilege
higher than the kernel is granted. Such secure features include
FPGA programming, remote status update, read and write the secure registers.
In terms of the ARMv8 architecture, the kernel runs at Exception Level 1 (EL1),
access to the features requires Exception Level 3 (EL3).
The Intel Stratix10 service layer provides kernel APIs for drivers to
request access to the secure features. The requests are queued and processed
one by one. ARM’s SMCCC is used to pass the execution of the requests on to
a secure monitor (EL3).
Later the Intel Stratix10 service layer driver will be extended to provide
services for QSPI, Crypto and warm reset.
v2: add patches for FPGA manager, FPGA manager binding, dts and defconfig
remove intel-service subdirectory and intel-service.h, move intel-smc.h
and intel-service.c to driver/misc subdirectory
remove global variables
change service layer driver be 'default n'
correct SPDX markers
add timeout for do..while() loop
add kernel-doc for the functions and structs, correct multiline comments
replace kfifo_in/kfifo_out with kfifo_in_spinlocked/kfifo_out_spinlocked
rename struct intel_svc_data (at client header) to intel_svc_client_msg
rename struct intel_svc_private_mem to intel_svc_data
other corrections/changes from Intel internal code reviews
v3: change all exported functions with "intel_svc_" as the prefix
increase timeout values for claiming back submitted buffer(s)
rename struct intel_command_reconfig_payload to
struct intel_svc_command_reconfig_payload
add pr_err() to provide the error return value
change to put fpga_mgr node under firmware/svc node
change to FPGA manager to align the update of service client APIs, and the
update of fpga_mgr device node
Other corrections/changes
v4: s/intel/stratix10/ on some variables, structs, functions, and file names
intel-service.c -> stratix10-svc.c
intel-smc.h -> stratix10-smc.h
intel-service-client.h -> stratix10-svc-client.h
remove non-kernel-doc formatting
s/fpga-mgr@0/fpga-mgr/ to remove unit_address at fpga_mgr node
add Rob's Reviewed-by
add Richard's signed-off-by
v5: add a new API statix10_svc_done() which is called by service client
when client request is completed or error occurs during request
process. Which allows service layer to free its resources.
remove dummy client from service layer client header and service layer
source file.
add Rob's Reviewed-by
add a new file stratix10-svc.rst and add that to driver-api/index.rst
kernel-doc fixes
v6: replace kthread_create_on_cpu() with kthread_create_on_node()
extend stratix_svc_send() to support service client which doesn't use
memory allocated by service layer
add S10_RECONFIG_TIMEOUT
rename s/S10_BUF_TIMEOUT/S10_BUFFER_TIMEOUT/
fix service layer and FPGA manager Klocwork errors
v7: add remote status update client support
s/pr_debug/dev_dbg, s/dev_info/dev_dbg
add unlock buffer if s10_svc_send_msg() fails
add release channel if fpga_mgr_create() fails
handle invalid pointer at svc if the client passed an invalid name
v8: move stratix10-smc.h to include/linux from driver/misc
revert version 7 error code & smc function ID value changes at
stratix10-smc.h
add a goto and common error handling at the end of fpga driver's
probe function
Alan Tull (3):
dt-bindings: fpga: add Stratix10 SoC FPGA manager binding
arm64: dts: stratix10: add fpga manager and region
fpga: add intel stratix10 soc fpga manager driver
Richard Gong (6):
dt-bindings, firmware: add Intel Stratix10 service layer binding
arm64: dts: stratix10: add stratix10 service driver binding to base
dtsi
misc: add Intel Stratix10 service layer driver
defconfig: enable fpga and service layer
Documentation: driver-api: add stratix10 service layer
misc: add remote status update client support
.../bindings/firmware/intel,stratix10-svc.txt | 57 ++
.../bindings/fpga/intel-stratix10-soc-fpga-mgr.txt | 17 +
Documentation/driver-api/index.rst | 1 +
Documentation/driver-api/stratix10-svc.rst | 32 +
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 33 +
arch/arm64/configs/defconfig | 7 +
drivers/fpga/Kconfig | 6 +
drivers/fpga/Makefile | 1 +
drivers/fpga/stratix10-soc.c | 560 ++++++++++
drivers/misc/Kconfig | 12 +
drivers/misc/Makefile | 1 +
drivers/misc/stratix10-svc.c | 1066 ++++++++++++++++++++
include/linux/stratix10-smc.h | 312 ++++++
include/linux/stratix10-svc-client.h | 217 ++++
14 files changed, 2322 insertions(+)
create mode 100644 Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
create mode 100644 Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
create mode 100644 Documentation/driver-api/stratix10-svc.rst
create mode 100644 drivers/fpga/stratix10-soc.c
create mode 100644 drivers/misc/stratix10-svc.c
create mode 100644 include/linux/stratix10-smc.h
create mode 100644 include/linux/stratix10-svc-client.h
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
