Gets rid of those warnings and better document the parameters.
./include/linux/mtd/rawnand.h:752: warning: Function parameter or member 'timings.sdr' not described in 'nand_data_interface'
./include/linux/mtd/rawnand.h:817: warning: Function parameter or member 'buf' not described in 'nand_op_data_instr'
./include/linux/mtd/rawnand.h:817: warning: Function parameter or member 'buf.in' not described in 'nand_op_data_instr'
./include/linux/mtd/rawnand.h:817: warning: Function parameter or member 'buf.out' not described in 'nand_op_data_instr'
./include/linux/mtd/rawnand.h:863: warning: Function parameter or member 'ctx' not described in 'nand_op_instr'
./include/linux/mtd/rawnand.h:863: warning: Function parameter or member 'ctx.cmd' not described in 'nand_op_instr'
./include/linux/mtd/rawnand.h:863: warning: Function parameter or member 'ctx.addr' not described in 'nand_op_instr'
./include/linux/mtd/rawnand.h:863: warning: Function parameter or member 'ctx.data' not described in 'nand_op_instr'
./include/linux/mtd/rawnand.h:863: warning: Function parameter or member 'ctx.waitrdy' not described in 'nand_op_instr'
./include/linux/mtd/rawnand.h:1010: warning: Function parameter or member 'ctx' not described in 'nand_op_parser_pattern_elem'
./include/linux/mtd/rawnand.h:1010: warning: Function parameter or member 'ctx.addr' not described in 'nand_op_parser_pattern_elem'
./include/linux/mtd/rawnand.h:1010: warning: Function parameter or member 'ctx.data' not described in 'nand_op_parser_pattern_elem'
./include/linux/mtd/rawnand.h:1313: warning: Function parameter or member 'manufacturer.desc' not described in 'nand_chip'
./include/linux/mtd/rawnand.h:1313: warning: Function parameter or member 'manufacturer.priv' not described in 'nand_chip'
./include/linux/mtd/rawnand.h:848: WARNING: Unexpected indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
---
include/linux/mtd/rawnand.h | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 5dad59b31244..b986f94906df 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -740,8 +740,9 @@ enum nand_data_interface_type {
/**
* struct nand_data_interface - NAND interface timing
- * @type: type of the timing
- * @timings: The timing, type according to @type
+ * @type: type of the timing
+ * @timings: The timing, type according to @type
+ * @timings.sdr: Use it when @type is %NAND_SDR_IFACE.
*/
struct nand_data_interface {
enum nand_data_interface_type type;
@@ -798,8 +799,9 @@ struct nand_op_addr_instr {
/**
* struct nand_op_data_instr - Definition of a data instruction
* @len: number of data bytes to move
- * @in: buffer to fill when reading from the NAND chip
- * @out: buffer to read from when writing to the NAND chip
+ * @buf: buffer to fill
+ * @buf.in: buffer to fill when reading from the NAND chip
+ * @buf.out: buffer to read from when writing to the NAND chip
* @force_8bit: force 8-bit access
*
* Please note that "in" and "out" are inverted from the ONFI specification
@@ -842,9 +844,13 @@ enum nand_op_instr_type {
/**
* struct nand_op_instr - Instruction object
* @type: the instruction type
- * @cmd/@addr/@data/@waitrdy: extra data associated to the instruction.
- * You'll have to use the appropriate element
- * depending on @type
+ * @ctx: extra data associated to the instruction. You'll have to use the
+ * appropriate element depending on @type
+ * @ctx.cmd: use it if @type is %NAND_OP_CMD_INSTR
+ * @ctx.addr: use it if @type is %NAND_OP_ADDR_INSTR
+ * @ctx.data: use it if @type is %NAND_OP_DATA_IN_INSTR
+ * or %NAND_OP_DATA_OUT_INSTR
+ * @ctx.waitrdy: use it if @type is %NAND_OP_WAITRDY_INSTR
* @delay_ns: delay the controller should apply after the instruction has been
* issued on the bus. Most modern controllers have internal timings
* control logic, and in this case, the controller driver can ignore
@@ -997,7 +1003,9 @@ struct nand_op_parser_data_constraints {
* struct nand_op_parser_pattern_elem - One element of a pattern
* @type: the instructuction type
* @optional: whether this element of the pattern is optional or mandatory
- * @addr/@data: address or data constraint (number of cycles or data length)
+ * @ctx: address or data constraint
+ * @ctx.addr: address constraint (number of cycles)
+ * @ctx.data: data constraint (data length)
*/
struct nand_op_parser_pattern_elem {
enum nand_op_instr_type type;
@@ -1224,6 +1232,8 @@ int nand_op_parser_exec_op(struct nand_chip *chip,
* devices.
* @priv: [OPTIONAL] pointer to private chip data
* @manufacturer: [INTERN] Contains manufacturer information
+ * @manufacturer.desc: [INTERN] Contains manufacturer's description
+ * @manufacturer.priv: [INTERN] Contains manufacturer private information
*/
struct nand_chip {
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
