Re: [RFC 06/10] misc: pci_endpoint_test: Add MSI-X support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tuesday 17 April 2018 11:08 PM, Gustavo Pimentel wrote:
> Hi Kishon,
> 
> On 17/04/2018 11:33, Kishon Vijay Abraham I wrote:
>> Hi,
>>
>> On Tuesday 10 April 2018 10:44 PM, Gustavo Pimentel wrote:
>>> Adds the MSI-X support and updates driver documentation accordingly.
>>>
>>> Changes the driver parameter in order to allow the interruption type
>>> selection.
>>>
>>> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
>>> ---
>>>  Documentation/misc-devices/pci-endpoint-test.txt |   3 +
>>>  drivers/misc/pci_endpoint_test.c                 | 102 +++++++++++++++++------
>>>  2 files changed, 79 insertions(+), 26 deletions(-)
>>>
>>> diff --git a/Documentation/misc-devices/pci-endpoint-test.txt b/Documentation/misc-devices/pci-endpoint-test.txt
>>> index 4ebc359..fdfa0f6 100644
>>> --- a/Documentation/misc-devices/pci-endpoint-test.txt
>>> +++ b/Documentation/misc-devices/pci-endpoint-test.txt
>>> @@ -10,6 +10,7 @@ The PCI driver for the test device performs the following tests
>>>  	*) verifying addresses programmed in BAR
>>>  	*) raise legacy IRQ
>>>  	*) raise MSI IRQ
>>> +	*) raise MSI-X IRQ
>>>  	*) read data
>>>  	*) write data
>>>  	*) copy data
>>> @@ -25,6 +26,8 @@ ioctl
>>>   PCITEST_LEGACY_IRQ: Tests legacy IRQ
>>>   PCITEST_MSI: Tests message signalled interrupts. The MSI number
>>>  	      to be tested should be passed as argument.
>>> + PCITEST_MSIX: Tests message signalled interrupts. The MSI-X number
>>> +	      to be tested should be passed as argument.
>>>   PCITEST_WRITE: Perform write tests. The size of the buffer should be passed
>>>  		as argument.
>>>   PCITEST_READ: Perform read tests. The size of the buffer should be passed
>>> diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
>>> index 37db0fc..a7d9354 100644
>>> --- a/drivers/misc/pci_endpoint_test.c
>>> +++ b/drivers/misc/pci_endpoint_test.c
>>> @@ -42,11 +42,16 @@
>>>  #define PCI_ENDPOINT_TEST_COMMAND	0x4
>>>  #define COMMAND_RAISE_LEGACY_IRQ	BIT(0)
>>>  #define COMMAND_RAISE_MSI_IRQ		BIT(1)
>>> -#define MSI_NUMBER_SHIFT		2
>>> -/* 6 bits for MSI number */
>>> -#define COMMAND_READ                    BIT(8)
>>> -#define COMMAND_WRITE                   BIT(9)
>>> -#define COMMAND_COPY                    BIT(10)
>>> +#define COMMAND_RAISE_MSIX_IRQ		BIT(2)
>>> +#define IRQ_TYPE_SHIFT			3
>>> +#define IRQ_TYPE_LEGACY			0
>>> +#define IRQ_TYPE_MSI			1
>>> +#define IRQ_TYPE_MSIX			2
>>> +#define MSI_NUMBER_SHIFT		5
>>
>> Now that you are anyways fixing this, add a new register entry for MSI numbers.
>> Let's not keep COMMAND and MSI's together.
> 
> What you suggest?

#define PCI_ENDPOINT_TEST_COMMAND	0x4
#define COMMAND_RAISE_LEGACY_IRQ	BIT(0)
#define COMMAND_RAISE_MSI_IRQ		BIT(1)
#define COMMAND_RAISE_MSIX_IRQ		BIT(2)
#define COMMAND_READ                    BIT(3)
#define COMMAND_WRITE                   BIT(4)
#define COMMAND_COPY                    BIT(5)

#define PCI_ENDPOINT_TEST_STATUS	0x8
#define STATUS_READ_SUCCESS             BIT(0)
#define STATUS_READ_FAIL                BIT(1)
#define STATUS_WRITE_SUCCESS            BIT(2)
#define STATUS_WRITE_FAIL               BIT(3)
#define STATUS_COPY_SUCCESS             BIT(4)
#define STATUS_COPY_FAIL                BIT(5)
#define STATUS_IRQ_RAISED               BIT(6)
#define STATUS_SRC_ADDR_INVALID         BIT(7)
#define STATUS_DST_ADDR_INVALID         BIT(8)

#define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR	0xc
#define PCI_ENDPOINT_TEST_UPPER_SRC_ADDR	0x10

#define PCI_ENDPOINT_TEST_LOWER_DST_ADDR	0x14
#define PCI_ENDPOINT_TEST_UPPER_DST_ADDR	0x18

#define PCI_ENDPOINT_TEST_SIZE		0x1c
#define PCI_ENDPOINT_TEST_CHECKSUM	0x20

#define PCI_ENDPOINT_TEST_MSI_NUMBER	0x24

We should try not to modify either the existing register offsets or the bit
fields within these registers in the future as EP and RC will be running on
different systems and it is possible one of them might not have the updated
kernel.
> 
>>> +/* 12 bits for MSI number */
>>> +#define COMMAND_READ                    BIT(17)
>>> +#define COMMAND_WRITE                   BIT(18)
>>> +#define COMMAND_COPY                    BIT(19)
>>
>> This change should be done along with the pci-epf-test in a single patch.
> 
> To be clear, you're saying is this patch should be just be squashed into the
> patch number 8 [1], because there is a lot of dependencies namely the defines,
> that is used on the alter functions.
> 
> [1] -> https://patchwork.ozlabs.org/patch/896841/

yeah. We have to make sure git bisect doesn't break functionality.
> 
>>>  
>>>  #define PCI_ENDPOINT_TEST_STATUS	0x8
>>>  #define STATUS_READ_SUCCESS             BIT(0)
>>> @@ -73,9 +78,9 @@ static DEFINE_IDA(pci_endpoint_test_ida);
>>>  #define to_endpoint_test(priv) container_of((priv), struct pci_endpoint_test, \
>>>  					    miscdev)
>>>  
>>> -static bool no_msi;
>>> -module_param(no_msi, bool, 0444);
>>> -MODULE_PARM_DESC(no_msi, "Disable MSI interrupt in pci_endpoint_test");
>>
>> Let's not remove this just to make sure existing users doesn't get affected.
> 
> Hum, by making an internal conversion? Like this
> no_msi = false <=> irq_type = 1
> no_msi = true <=> irq_type = 0

yeah..

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux