[RFC bpf-next v2 8/8] bpf: add documentation for eBPF helpers (58-64)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add documentation for eBPF helper functions to bpf.h user header file.
This documentation can be parsed with the Python script provided in
another commit of the patch series, in order to provide a RST document
that can later be converted into a man page.

The objective is to make the documentation easily understandable and
accessible to all eBPF developers, including beginners.

This patch contains descriptions for the following helper functions, all
written by John:

- bpf_redirect_map()
- bpf_sk_redirect_map()
- bpf_sock_map_update()
- bpf_msg_redirect_map()
- bpf_msg_apply_bytes()
- bpf_msg_cork_bytes()
- bpf_msg_pull_data()

Cc: John Fastabend <john.fastabend@xxxxxxxxx>
Signed-off-by: Quentin Monnet <quentin.monnet@xxxxxxxxxxxxx>
---
 include/uapi/linux/bpf.h | 140 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 140 insertions(+)

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 7343af4196c8..db090ad03626 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -1250,6 +1250,51 @@ union bpf_attr {
  * 	Return
  * 		0 on success, or a negative error in case of failure.
  *
+ * int bpf_redirect_map(struct bpf_map *map, u32 key, u64 flags)
+ * 	Description
+ * 		Redirect the packet to the endpoint referenced by *map* at
+ * 		index *key*. Depending on its type, his *map* can contain
+ * 		references to net devices (for forwarding packets through other
+ * 		ports), or to CPUs (for redirecting XDP frames to another CPU;
+ * 		but this is not fully implemented as of this writing).
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ * 	Return
+ * 		**XDP_REDIRECT** on success, or **XDP_ABORT** on error.
+ *
+ * int bpf_sk_redirect_map(struct bpf_map *map, u32 key, u64 flags)
+ * 	Description
+ * 		Redirect the packet to the socket referenced by *map* (of type
+ * 		**BPF_MAP_TYPE_SOCKMAP**) at index *key*. The only flag
+ * 		supported for now is **BPF_F_INGRESS**, which indicates the
+ * 		packet is to be redirected to the ingress side of the socket
+ * 		instead of (by default) egress.
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ * 	Return
+ * 		**SK_PASS** on success, or **SK_DROP** on error.
+ *
+ * int bpf_sock_map_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags)
+ * 	Description
+ * 		Add an entry to, or update a *map* referencing sockets. The
+ * 		*skops* is used as a new value for the entry associated to
+ * 		*key*. *flags* is one of:
+ *
+ * 		**BPF_NOEXIST**
+ * 			The entry for *key* must not exist in the map.
+ * 		**BPF_EXIST**
+ * 			The entry for *key* must already exist in the map.
+ * 		**BPF_ANY**
+ * 			No condition on the existence of the entry for *key*.
+ *
+ * 		If the *map* has eBPF programs (parser and verdict), those will
+ * 		be inherited by the socket being added. If the socket is
+ * 		already attached to eBPF programs, this results in an error.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
  * int bpf_xdp_adjust_meta(struct xdp_buff *xdp_md, int delta)
  * 	Description
  * 		Adjust the address pointed by *xdp_md*\ **->data_meta** by
@@ -1417,6 +1462,101 @@ union bpf_attr {
  * 		be set is returned (which comes down to 0 if all bits were set
  * 		as required).
  *
+ * int bpf_msg_redirect_map(struct sk_msg_buff *msg, struct bpf_map *map, u32 key, u64 flags)
+ * 	Description
+ * 		This helper is used in programs implementing policies at the
+ * 		socket level. If the message *msg* is allowed to pass (i.e. if
+ * 		the verdict eBPF program returns **SK_PASS**), redirect it to
+ * 		the socket referenced by *map* (of type
+ * 		**BPF_MAP_TYPE_SOCKMAP**) at index *key*. The only flag
+ * 		supported for now is **BPF_F_INGRESS**, which indicates the
+ * 		packet is to be redirected to the ingress side of the socket
+ * 		instead of (by default) egress.
+ * 	Return
+ * 		**SK_PASS** on success, or **SK_DROP** on error.
+ *
+ * int bpf_msg_apply_bytes(struct sk_msg_buff *msg, u32 bytes)
+ * 	Description
+ * 		For socket policies, apply the verdict of the eBPF program to
+ * 		the next *bytes* (number of bytes) of message *msg*.
+ *
+ * 		For example, this helper can be used in the following cases:
+ *
+ * 		* A single **sendmsg**\ () or **sendfile**\ () system call
+ * 		  contains multiple logical messages that the eBPF program is
+ * 		  supposed to read and for which it should apply a verdict.
+ * 		* An eBPF program only cares to read the first *bytes* of a
+ * 		  *msg*. If the message has a large payload, then setting up
+ * 		  and calling the eBPF program repeatedly for all bytes, even
+ * 		  though the verdict is already known, would create unnecessary
+ * 		  overhead.
+ *
+ * 		When called from within an eBPF program, the helper sets a
+ * 		counter internal to the BPF infrastructure, that is used to
+ * 		apply the last verdict to the next *bytes*. If *bytes* is
+ * 		smaller than the current data being processed from a
+ * 		**sendmsg**\ () or **sendfile**\ () system call, the first
+ * 		*bytes* will be sent and the eBPF program will be re-run with
+ * 		the pointer for start of data pointing to byte number *bytes*
+ * 		**+ 1**. If *bytes* is larger than the current data being
+ * 		processed, then the eBPF verdict will be applied to multiple
+ * 		**sendmsg**\ () or **sendfile**\ () calls until *bytes* are
+ * 		consumed.
+ *
+ * 		Note that if a socket closes with the internal counter holding
+ * 		a non-zero value, this is not a problem because data is not
+ * 		being buffered for *bytes* and is sent as it is received.
+ * 	Return
+ * 		0
+ *
+ * int bpf_msg_cork_bytes(struct sk_msg_buff *msg, u32 bytes)
+ * 	Description
+ * 		For socket policies, prevent the execution of the verdict eBPF
+ * 		program for message *msg* until *bytes* (byte number) have been
+ * 		accumulated.
+ *
+ * 		This can be used when one needs a specific number of bytes
+ * 		before a verdict can be assigned, even if the data spans
+ * 		multiple **sendmsg**\ () or **sendfile**\ () calls. The extreme
+ * 		case would be a user calling **sendmsg**\ () repeatedly with
+ * 		1-byte long message segments. Obviously, this is bad for
+ * 		performance, but it is still valid. If the eBPF program needs
+ * 		*bytes* bytes to validate a header, this helper can be used to
+ * 		prevent the eBPF program to be called again until *bytes* have
+ * 		been accumulated.
+ * 	Return
+ * 		0
+ *
+ * int bpf_msg_pull_data(struct sk_msg_buff *msg, u32 start, u32 end, u64 flags)
+ * 	Description
+ * 		For socket policies, pull in non-linear data from user space
+ * 		for *msg* and set pointers *msg*\ **->data** and *msg*\
+ * 		**->data_end** to *start* and *end* bytes offsets into *msg*,
+ * 		respectively.
+ *
+ * 		If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a
+ * 		*msg* it can only parse data that the (**data**, **data_end**)
+ * 		pointers have already consumed. For **sendmsg**\ () hooks this
+ * 		is likely the first scatterlist element. But for calls relying
+ * 		on the **sendpage** handler (e.g. **sendfile**\ ()) this will
+ * 		be the range (**0**, **0**) because the data is shared with
+ * 		user space and by default the objective is to avoid allowing
+ * 		user space to modify data while (or after) eBPF verdict is
+ * 		being decided. This helper can be used to pull in data and to
+ * 		set the start and end pointer to given values. Data will be
+ * 		copied if necessary (i.e. if data was not linear and if start
+ * 		and end pointers do not point to the same chunk).
+ *
+ * 		A call to this helper is susceptible to change data from the
+ * 		packet. Therefore, at load time, all checks on pointers
+ * 		previously done by the verifier are invalidated and must be
+ * 		performed again.
+ *
+ * 		All values for *flags* are reserved for future usage, and must
+ * 		be left at zero.
+ * 	Return
+ * 		0 on success, or a negative error in case of failure.
+ *
  * int bpf_bind(struct bpf_sock_addr_kern *ctx, struct sockaddr *addr, int addr_len)
  * 	Description
  * 		Bind the socket associated to *ctx* to the address pointed by
-- 
2.14.1

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux