Given the fact that thread mode had been merged into 4.14, it is now
time to enable cpuset to be used in the default hierarchy (cgroup v2)
as it is clearly threaded.
The cpuset controller had experienced feature creep since its
introduction more than a decade ago. Besides the core cpus and mems
control files to limit cpus and memory nodes, there are a bunch of
additional features that can be controlled from the userspace. Some of
the features are of doubtful usefulness and may not be actively used.
This patch enables cpuset controller in the default hierarchy with
a minimal set of features, namely just the cpus and mems and their
effective_* counterparts. We can certainly add more features to the
default hierarchy in the future if there is a real user need for them
later on.
Alternatively, with the unified hiearachy, it may make more sense
to move some of those additional cpuset features, if desired, to
memory controller or may be to the cpu controller instead of staying
with cpuset.
v4:
- Further minimize the feature set by removing the flags control knob.
v3:
- Further trim the additional features down to just memory_migrate.
- Update Documentation/cgroup-v2.txt.
Signed-off-by: Waiman Long <longman@xxxxxxxxxx>
---
Documentation/cgroup-v2.txt | 96 ++++++++++++++++++++++++++++++++++++++++-----
kernel/cgroup/cpuset.c | 44 +++++++++++++++++++--
2 files changed, 127 insertions(+), 13 deletions(-)
diff --git a/Documentation/cgroup-v2.txt b/Documentation/cgroup-v2.txt
index 74cdeae..8d7300f 100644
--- a/Documentation/cgroup-v2.txt
+++ b/Documentation/cgroup-v2.txt
@@ -48,16 +48,18 @@ v1 is available under Documentation/cgroup-v1/.
5-2-1. Memory Interface Files
5-2-2. Usage Guidelines
5-2-3. Memory Ownership
- 5-3. IO
- 5-3-1. IO Interface Files
- 5-3-2. Writeback
- 5-4. PID
- 5-4-1. PID Interface Files
- 5-5. Device
- 5-6. RDMA
- 5-6-1. RDMA Interface Files
- 5-7. Misc
- 5-7-1. perf_event
+ 5-3. Cpuset
+ 5.3-1. Cpuset Interface Files
+ 5-4. IO
+ 5-4-1. IO Interface Files
+ 5-4-2. Writeback
+ 5-5. PID
+ 5-5-1. PID Interface Files
+ 5-6. Device
+ 5-7. RDMA
+ 5-7-1. RDMA Interface Files
+ 5-8. Misc
+ 5-8-1. perf_event
5-N. Non-normative information
5-N-1. CPU controller root cgroup process behaviour
5-N-2. IO controller root cgroup process behaviour
@@ -1243,6 +1245,80 @@ POSIX_FADV_DONTNEED to relinquish the ownership of memory areas
belonging to the affected files to ensure correct memory ownership.
+Cpuset
+------
+
+The "cpuset" controller provides a mechanism for constraining
+the CPU and memory node placement of tasks to only the resources
+specified in the cpuset interface files in a task's current cgroup.
+This is especially valuable on large NUMA systems where placing jobs
+on properly sized subsets of the systems with careful processor and
+memory placement to reduce cross-node memory access and contention
+can improve overall system performance.
+
+The "cpuset" controller is hierarchical. That means the controller
+cannot use CPUs or memory nodes not allowed in its parent.
+
+
+Cpuset Interface Files
+~~~~~~~~~~~~~~~~~~~~~~
+
+ cpuset.cpus
+ A read-write multiple values file which exists on non-root
+ cgroups.
+
+ It lists the CPUs allowed to be used by tasks within this
+ cgroup. The CPU numbers are comma-separated numbers or
+ ranges. For example:
+
+ # cat cpuset.cpus
+ 0-4,6,8-10
+
+ An empty value indicates that the cgroup is using the same
+ setting as the nearest cgroup ancestor with a non-empty
+ "cpuset.cpus" or all the available CPUs if none is found.
+
+ The value of "cpuset.cpus" stays constant until the next update
+ and won't be affected by any CPU hotplug events.
+
+ cpuset.effective_cpus
+ A read-only multiple values file which exists on non-root
+ cgroups.
+
+ It lists the onlined CPUs that are actually allowed to be
+ used by tasks within the current cgroup. It is a subset of
+ "cpuset.cpus". Its value will be affected by CPU hotplug
+ events.
+
+ cpuset.mems
+ A read-write multiple values file which exists on non-root
+ cgroups.
+
+ It lists the memory nodes allowed to be used by tasks within
+ this cgroup. The memory node numbers are comma-separated
+ numbers or ranges. For example:
+
+ # cat cpuset.mems
+ 0-1,3
+
+ An empty value indicates that the cgroup is using the same
+ setting as the nearest cgroup ancestor with a non-empty
+ "cpuset.mems" or all the available memory nodes if none
+ is found.
+
+ The value of "cpuset.mems" stays constant until the next update
+ and won't be affected by any memory nodes hotplug events.
+
+ cpuset.effective_mems
+ A read-only multiple values file which exists on non-root
+ cgroups.
+
+ It lists the onlined memory nodes that are actually allowed
+ to be used by tasks within the current cgroup. It is a subset
+ of "cpuset.mems". Its value will be affected by memory nodes
+ hotplug events.
+
+
IO
--
diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index b42037e..7837d1f 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -1823,12 +1823,11 @@ static s64 cpuset_read_s64(struct cgroup_subsys_state *css, struct cftype *cft)
return 0;
}
-
/*
* for the common functions, 'private' gives the type of file
*/
-static struct cftype files[] = {
+static struct cftype legacy_files[] = {
{
.name = "cpus",
.seq_show = cpuset_common_seq_show,
@@ -1931,6 +1930,43 @@ static s64 cpuset_read_s64(struct cgroup_subsys_state *css, struct cftype *cft)
};
/*
+ * This is currently a minimal set for the default hierarchy. It can be
+ * expanded later on by migrating more features and control files from v1.
+ */
+static struct cftype dfl_files[] = {
+ {
+ .name = "cpus",
+ .seq_show = cpuset_common_seq_show,
+ .write = cpuset_write_resmask,
+ .max_write_len = (100U + 6 * NR_CPUS),
+ .private = FILE_CPULIST,
+ },
+
+ {
+ .name = "mems",
+ .seq_show = cpuset_common_seq_show,
+ .write = cpuset_write_resmask,
+ .max_write_len = (100U + 6 * MAX_NUMNODES),
+ .private = FILE_MEMLIST,
+ },
+
+ {
+ .name = "effective_cpus",
+ .seq_show = cpuset_common_seq_show,
+ .private = FILE_EFFECTIVE_CPULIST,
+ },
+
+ {
+ .name = "effective_mems",
+ .seq_show = cpuset_common_seq_show,
+ .private = FILE_EFFECTIVE_MEMLIST,
+ },
+
+ { } /* terminate */
+};
+
+
+/*
* cpuset_css_alloc - allocate a cpuset css
* cgrp: control group that the new cpuset will be part of
*/
@@ -2104,8 +2140,10 @@ struct cgroup_subsys cpuset_cgrp_subsys = {
.post_attach = cpuset_post_attach,
.bind = cpuset_bind,
.fork = cpuset_fork,
- .legacy_cftypes = files,
+ .legacy_cftypes = legacy_files,
+ .dfl_cftypes = dfl_files,
.early_init = true,
+ .threaded = true,
};
/**
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
