On 2/1/2018 8:32 AM, Aishwarya Pant wrote: > Add documentation for core and hardware specific infiniband interfaces. > The descriptions have been collected from git commit logs, reading > through code and data sheets. Some drivers have incomplete doc and are > annotated with the comment '[to be documented]'. > > Signed-off-by: Aishwarya Pant <aishpant@xxxxxxxxx> > --- > Documentation/ABI/testing/sysfs-class-infiniband | 755 +++++++++++++++++++++++ > 1 file changed, 755 insertions(+) > > diff --git a/Documentation/ABI/testing/sysfs-class-infiniband b/Documentation/ABI/testing/sysfs-class-infiniband > index a86abe66a316..2e150169633b 100644 > --- a/Documentation/ABI/testing/sysfs-class-infiniband > +++ b/Documentation/ABI/testing/sysfs-class-infiniband > @@ -1,3 +1,194 @@ > +sysfs interface common for all infiniband devices > +------------------------------------------------- > + > +What: /sys/class/infiniband/<device>/node_type > +What: /sys/class/infiniband/<device>/node_guid > +What: /sys/class/infiniband/<device>/sys_image_guid > +Date: Apr, 2005 > +KernelVersion: v2.6.12 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + node_type: (RO) Node type (CA, RNIC, usNIC, usNIC UDP, > + switch or router) > + > + node_guid: (RO) Node GUID > + > + sys_image_guid: (RO) System image GUID > + > + > +What: /sys/class/infiniband/<device>/node_desc > +Date: Feb, 2006 > +KernelVersion: v2.6.17 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + (RW) Update the node description with information such as the > + node's hostname, so that IB network management software can tie > + its view to the real world. > + > + > +What: /sys/class/infiniband/<device>/fw_ver > +Date: Jun, 2016 > +KernelVersion: v4.10 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + (RO) Display firmware version > + > + > +What: /sys/class/infiniband/<device>/ports/<port-num>/lid > +What: /sys/class/infiniband/<device>/ports/<port-num>/rate > +What: /sys/class/infiniband/<device>/ports/<port-num>/lid_mask_count > +What: /sys/class/infiniband/<device>/ports/<port-num>/sm_sl > +What: /sys/class/infiniband/<device>/ports/<port-num>/sm_lid > +What: /sys/class/infiniband/<device>/ports/<port-num>/state > +What: /sys/class/infiniband/<device>/ports/<port-num>/phys_state > +What: /sys/class/infiniband/<device>/ports/<port-num>/cap_mask > +Date: Apr, 2005 > +KernelVersion: v2.6.12 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + > + lid: (RO) Port LID > + > + rate: (RO) Port data rate (active width * active > + speed) > + > + lid_mask_count: (RO) Port LID mask count > + > + sm_slL (RO) Subnet manager SL for port's subnet Typo sm_sl: > + > + sm_lid: (RO) Subnet manager LID for port's subnet > + > + state: (RO) Port state (DOWN, INIT, ARMED, ACTIVE or > + ACTIVE_DEFER> + > + phys_state: (RO) Port physical state (Sleep, Polling, > + LinkUp, etc) > + > + cap_mask: (RO) Port capability mask 2 bits here are settable: IsCommunicationManagementSupported and IsSM. > + > + > +What: /sys/class/inifiniband/<device>/ports/<port-num>/link_layer Typo: infiniband > +Date: Oct, 2010 > +KernelVersion: v2.6.37 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + (RO) Link layer type information (Infiniband or Ethernet type) > + > + > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/symbol_error > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_errors > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_remote_physical_errors > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_switch_relay_errors > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/link_error_recovery > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_constraint_errors > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_contraint_errors > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/local_link_integrity_errors > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/ecessive_buffer_overrun_errors typo: excessive_buffer_overrun_errors > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_data > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_data > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_packets > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_packets > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/unicast_rcv_packets > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/unicast_xmit_packets > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/multicast_rcv_packets > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/multicast_xmit_packets > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/link_downed > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_discards > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/VL15_dropped > +What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_wait > +Date: Apr, 2005 > +KernelVersion: v2.6.12 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + Errors info: > + ----------- > + > + symbol_error: (RO) Total number of minor link errors detected on > + one or more physical lanes. > + > + port_rcv_error : (RO) Total number of packets containing an > + error that were received on the port. typo: port_rcv_errors > + > + port_rcv_remote_physical_errors : (RO) Total number of packets > + marked with the EBP delimiter received on the port. > + > + port_rcv_switch_relay_errors : (RO) Total number of packets > + received on the port that were discarded because they could not > + be forwarded by the switch relay. > + > + link_error_recovery: (RO) Total number of times the Port > + Training state machine has successfully completed the link error > + recovery process. > + > + port_xmit_constraint_errors: (RO) Total number of packets not > + transmitted from the switch physical port. due to outbound raw filtering or failing outbound partition or IP version check. > + > + port_rcv_constraint_errors: (RO) Total number of packets > + received on the switch physical port that are discarded. due to inbound raw filtering or failing outbound partition or IP version check. > + > + local_link_integrity_errors: (RO) The number of times that the > + count of local physical errors exceeded the threshold specified > + by LocalPhyErrors > + > + excessive_buffer_overrun_errors: (RO) This counter, indicates an > + input buffer overrun. It indicates possible misconfiguration of > + a port, either by the Subnet Manager (SM) or by user > + intervention. It can also indicate hardware issues or extremely > + poor link signal integrity > + > + Data info: > + --------- > + > + port_xmit_data: (RO) Total number of data octets, divided by 4 > + (lanes), transmitted on all VLs. This is 64 bit counter > + > + port_rcv_data: (RO) Total number of data octets, divided by 4 > + (lanes), received on all VLs. This is 64 bit counter. > + > + port_xmit_packets: (RO) Total number of packets transmitted on > + all VLs from this port. This may include packets with errors. > + This is 64 bit counter. > + > + port_rcv_packets: (RO) Total number of packets (this may include > + packets containing Errors. This is 64 bit counter. > + > + link_downed: (RO) Total number of times the Port Training state > + machine has failed the link error recovery process and downed > + the link. > + > + unicast_rcv_packets: (RO) Total number of unicast packets, > + including unicast packets containing errors. > + > + unicast_xmit_packets: (RO) Total number of unicast packets > + transmitted on all VLs from the port. This may include unicast > + packets with errors. > + > + multicast_rcv_packets: (RO) Total number of multicast packets, > + including multicast packets containing errors. > + > + multicast_xmit_packets: (RO) Total number of multicast packets > + transmitted on all VLs from the port. This may include multicast > + packets with errors. > + > + Misc info: > + --------- > + > + port_xmit_discards: (RO) Total number of outbound packets > + discarded by the port because the port is down or congested. > + > + VL15_dropped: (RO) Number of incoming VL15 packets dropped due > + to resource limitations (e.g., lack of buffers) of the port. > + > + port_xmit_wait: (RO) The number of ticks during which the port > + had data to transmit but no data was sent during the entire tick > + (either because of insufficient credits or because of lack of > + arbitration). > + > + Each of these files contains the corresponding value from the > + port's Performance Management PortCounters attribute, as > + described in the InfiniBand Architecture Specification. > + > + > What: /sys/class/infiniband/<hca>/ports/<port-number>/gid_attrs/ndevs/<gid-index> > Date: November 29, 2015 > KernelVersion: 4.4.0 > @@ -14,3 +205,567 @@ Description: The RoCE type of the associated GID resides at index <gid-index>. > or "RoCE v2" for RoCE v2 based GIDs. > > > +What: /sys/class/infiniband_mad/umadN/ibdev > +What: /sys/class/infiniband_mad/umadN/port > +What: /sys/class/infiniband_mad/issmN/ibdev > +What: /sys/class/infiniband_mad/issmN/port > +Date: Apr, 2005 > +KernelVersion: v2.6.12 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + Each port of each InfiniBand device has a "umad" device and an > + "issm" device attached. For example, a two-port HCA will have > + two umad devices and two issm devices, while a switch will have > + one device of each type (for switch port 0). > + > + ibdev: (RO) Show Infiniband (IB) device name > + > + port: (RO) Display port number > + > + > +What: /sys/class/infiniband_mad/abi_version > +Date: Apr, 2005 > +KernelVersion: v2.6.12 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + (RO) Value is incremented if any changes are made that break > + userspace ABI compatibility of umad & issm devices. > + > + > +What: /sys/class/infiniband_cm/ucmN/ibdev > +Date: Oct, 2005 > +KernelVersion: v2.6.14 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + (RO) Display Infiniband (IB) device name > + > + > +What: /sys/class/infiniband_cm/abi_version > +Date: Oct, 2005 > +KernelVersion: v2.6.14 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + (RO) Value is incremented if any changes are made that break > + userspace ABI compatibility of ucm devices. > + > + > +What: /sys/class/infiniband_verbs/uverbsN/ibdev > +What: /sys/class/infiniband_verbs/uverbsN/abi_version > +Date: Sept, 2005 > +KernelVersion: v2.6.14 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + ibdev: (RO) Display Infiniband (IB) device name > + > + abi_version: (RO) Show ABI version of IB device specific > + interfaces. > + > + > +What: /sys/class/infiniband_verbs/abi_version > +Date: Sep, 2005 > +KernelVersion: v2.6.14 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + (RO) Value is incremented if any changes are made that break > + userspace ABI compatibility uverbs devices. > + > + > +sysfs interface for Mellanox IB HCA low-level driver (mthca) > +------------------------------------------------------------ > + > +What: /sys/class/infiniband/mthcaX/hw_rev > +What: /sys/class/infiniband/mthcaX/hca_type > +What: /sys/class/infiniband/mthcaX/board_id > +Date: Apr, 2005 > +KernelVersion: v2.6.12 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + hw_rev: (RO) Hardware revision number > + > + hca_type: (RO) Host Channel Adapter type: MT23108, MT25208 > + (MT23108 compat mode), MT25208 or MT25204 > + > + board_id: (RO) Manufacturing board ID > + > + > +sysfs interface for Chelsio T3 RDMA Driver (cxgb3) > +-------------------------------------------------- > + > +What: /sys/class/infiniband/cxgb3_X/hw_rev > +What: /sys/class/infiniband/cxgb3_X/hca_type > +What: /sys/class/infiniband/cxgb3_X/board_id > +Date: Feb, 2007 > +KernelVersion: v2.6.21 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + hw_rev: (RO) Hardware revision number > + > + hca_type: (RO) HCA type. Here it is a driver short name. > + It should normally match the name in its bus > + driver structure (e.g. pci_driver::name). > + > + board_id: (RO) Manufacturing board id > + > + > +sysfs interface for Mellanox ConnectX HCA IB driver (mlx4) > +---------------------------------------------------------- > + > +What: /sys/class/infiniband/mlx4_X/hw_rev > +What: /sys/class/infiniband/mlx4_X/hca_type > +What: /sys/class/infiniband/mlx4_X/board_id > +Date: Sep, 2007 > +KernelVersion: v2.6.24 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + hw_rev: (RO) Hardware revision number > + > + hca_type: (RO) Host channel adapter type > + > + board_id: (RO) Manufacturing board ID > + > + > +What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/gids/<n> > +What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/admin_guids/<n> > +What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/pkeys/<n> > +What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/mcgs/ > +What: /sys/class/infiniband/mlx4_X/iov/ports/<pci-slot-num>/ports/<m>/gid_idx/0 > +What: /sys/class/infiniband/mlx4_X/iov/ports/<pci-slot-num>/ports/<m>/pkey_idx/<n> > +Date: Aug, 2012 > +KernelVersion: v3.6.15 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + The sysfs iov directory is used to manage and examine the port > + P_Key and guid paravirtualization. This directory is added only > + for the master -- slaves do not have it. > + > + Under iov/ports, the administrator may examine the gid and P_Key > + tables as they are present in the device (and as are seen in the > + "network view" presented to the SM). > + > + The "pkeys" and "gids" subdirectories contain one file for each > + entry in the port's P_Key or GID table respectively. For > + example, ports/1/pkeys/10 contains the value at index 10 in port > + 1's P_Key table. > + > + gids/<n>: (RO) The physical port gids n = 0..127 > + > + admin_guids/<n>: (RW) Allows examining or changing the > + administrative state of a given GUID > + n = 0..127 > + > + pkeys/<n>: (RO) Displays the contents of the physical > + key table n = 0..126 > + > + mcgs/: (RO) Muticast group table > + > + <m>/gid_idx/0: (RO) Display the GID mapping m = 1..2 > + > + <m>/pkey_idx/<n>: (RW) Writable except for RoCE pkeys. > + m = 1..2, n = 0..126 > + > + Under the iov/<pci slot number> > + directories, the admin may map the index > + numbers in the physical tables (as under > + iov/ports) to the paravirtualized index > + numbers that guests see. > + > + For example, if the administrator, for > + port 1 on guest 2 maps physical pkey > + index 10 to virtual index 1, then that > + guest, whenever it uses its pkey index > + 1, will actually be using the real pkey > + index 10. > + > + > +What: /sys/class/infiniband/mlx4_X/iov/<pci-slot-num>/ports/<m>/smi_enabled > +What: /sys/class/infiniband/mlx4_X/iov/<pci-slot-num>/ports/<m>/enable_smi_admin > +Date: May, 2014 > +KernelVersion: v3.15.7 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + Enabling QP0 on VFs for selected VF/port. By default, no VFs are > + enabled for QP0 operation. > + > + smi_enabled: (RO) Indicates whether smi is currently enabled > + for the indicated VF/port > + > + enable_smi_admin:(RW) Used by the admin to request that smi > + capability be enabled or disabled for the > + indicated VF/port. 0 = disable, 1 = enable. > + > + The requested enablement will occur at the next reset of the VF > + (e.g. driver restart on the VM which owns the VF). > + > + > +sysfs interface for NetEffect RNIC Low-Level iWARP driver (nes) > +--------------------------------------------------------------- > + > +What: /sys/class/infiniband/nesX/hw_rev > +What: /sys/class/infiniband/nesX/hca_type > +What: /sys/class/infiniband/nesX/board_id > +Date: Feb, 2008 > +KernelVersion: v2.6.25 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + hw_rev: (RO) Hardware revision number > + > + hca_type: (RO) Host Channel Adapter type (NEX020) > + > + board_id: (RO) Manufacturing board id > + > + > +sysfs interface for Chelsio T4/T5 RDMA driver (cxgb4) > +----------------------------------------------------- > + > +What: /sys/class/infiniband/cxgb4_X/hw_rev > +What: /sys/class/infiniband/cxgb4_X/hca_type > +What: /sys/class/infiniband/cxgb4_X/board_id > +Date: Apr, 2010 > +KernelVersion: v2.6.35 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + > + hw_rev: (RO) Hardware revision number > + > + hca_type: (RO) Driver short name. Should normally match > + the name in its bus driver structure (e.g. > + pci_driver::name) > + > + board_id: (RO) Manufacturing board id. (Vendor + device > + information) > + > + > +sysfs interface for Intel IB driver qib > +--------------------------------------- > + > +What: /sys/class/infiniband/qibX/version > +What: /sys/class/infiniband/qibX/hw_rev > +What: /sys/class/infiniband/qibX/hca_type > +What: /sys/class/infiniband/qibX/board_id > +What: /sys/class/infiniband/qibX/boardversion > +What: /sys/class/infiniband/qibX/nctxts > +What: /sys/class/infiniband/qibX/localbus_info > +What: /sys/class/infiniband/qibX/tempsense > +What: /sys/class/infiniband/qibX/serial > +What: /sys/class/infiniband/qibX/nfreectxts > +What: /sys/class/infiniband/qibX/chip_reset > +Date: May, 2010 > +KernelVersion: v2.6.35 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + version: (RO) Display version information of installed software > + and drivers. > + > + hw_rev: (RO) Hardware revision number > + > + hca_type: (RO) Host channel adapter type > + > + board_id: (RO) Manufacturing board id > + > + boardversion: (RO) Current version of the chip architecture > + > + nctxts: (RO) Return the number of user ports (contexts) > + available > + > + localbus_info: (RO) Human readable localbus info > + > + tempsense: (RO) Display temp sense registers in decimal > + > + serial: (RO) Serial number of the HCA > + > + nfreectxts: (RO) The number of free user ports (contexts) > + available. > + > + chip_reset: (WO) Reset the chip if possible by writing > + "reset" to this file. Only allowed if no user > + contexts are open that use chip resources. > + > + > +What: /sys/class/infiniband/qibX/ports/N/sl2vl/[0-15] > +Date: May, 2010 > +KernelVersion: v2.6.35 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + (RO) The directory contains 16 files numbered 0-15 that specify > + the Service Level (SL). Listing the SL files returns the Virtual > + Lane (VL) as programmed by the SL. > + > +What: /sys/class/infiniband/qibX/ports/N/CCMgtA/cc_settings_bin > +What: /sys/class/infiniband/qibX/ports/N/CCMgtA/cc_table_bin > +Date: May, 2010 > +KernelVersion: v2.6.35 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + Per-port congestion control. Both are binary attributes. > + > + cc_table_bin: (RO) Congestion control table size followed by > + table entries. > + > + cc_settings_bin:(RO) Congestion settings: port control, control > + map and an array of 16 entries for the > + congestion entries - increase, timer, event log > + trigger threshold and the minimum injection rate > + delay. > + > +What: /sys/class/infiniband/qibX/ports/N/linkstate/loopback > +What: /sys/class/infiniband/qibX/ports/N/linkstate/led_override > +What: /sys/class/infiniband/qibX/ports/N/linkstate/hrtbt_enable > +What: /sys/class/infiniband/qibX/ports/N/linkstate/status > +What: /sys/class/infiniband/qibX/ports/N/linkstate/status_str > +Date: May, 2010 > +KernelVersion: v2.6.35 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + [to be documented] > + > + loopback: (WO) > + led_override: (WO) > + hrtbt_enable: (RW) > + status: (RO) > + > + status_str: (RO) Displays information about the link state, > + possible cable/switch problems, and hardware > + errors. Possible states are- "Initted", > + "Present", "IB_link_up", "IB_configured" or > + "Fatal_Hardware_Error". > + > +What: /sys/class/infiniband/qibX/ports/N/diag_counters/rc_resends > +What: /sys/class/infiniband/qibX/ports/N/diag_counters/seq_naks > +What: /sys/class/infiniband/qibX/ports/N/diag_counters/rdma_seq > +What: /sys/class/infiniband/qibX/ports/N/diag_counters/rnr_naks > +What: /sys/class/infiniband/qibX/ports/N/diag_counters/other_naks > +What: /sys/class/infiniband/qibX/ports/N/diag_counters/rc_timeouts > +What: /sys/class/infiniband/qibX/ports/N/diag_counters/look_pkts > +What: /sys/class/infiniband/qibX/ports/N/diag_counters/pkt_drops > +What: /sys/class/infiniband/qibX/ports/N/diag_counters/dma_wait > +What: /sys/class/infiniband/qibX/ports/N/diag_counters/unaligned > +Date: May, 2010 > +KernelVersion: v2.6.35 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + [to be documented] > + > + > +sysfs interface for Mellanox Connect-IB HCA driver mlx5 > +------------------------------------------------------- > + > +What: /sys/class/infiniband/mlx5_X/hw_rev > +What: /sys/class/infiniband/mlx5_X/hca_type > +What: /sys/class/infiniband/mlx5_X/reg_pages > +What: /sys/class/infiniband/mlx5_X/fw_pages > +Date: Jul, 2013 > +KernelVersion: v3.11 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + [to be documented] > + > + > +sysfs interface for Cisco VIC (usNIC) Verbs Driver > +-------------------------------------------------- > + > +What: /sys/class/infiniband/usnic_X/board_id > +What: /sys/class/infiniband/usnic_X/config > +What: /sys/class/infiniband/usnic_X/qp_per_vf > +What: /sys/class/infiniband/usnic_X/max_vf > +What: /sys/class/infiniband/usnic_X/cq_per_vf > +What: /sys/class/infiniband/usnic_X/iface > +Date: Sep, 2013 > +KernelVersion: v3.14 > +Contact: Christian Benvenuti <benve@xxxxxxxxx>, > + Dave Goodell <dgoodell@xxxxxxxxx>, > + linux-rdma@xxxxxxxxxxxxxxx > +Description: > + > + board_id: (RO) Manufacturing board id > + > + config: (RO) Report the configuration for this PF > + > + qp_per_vf: (RO) Queue pairs per virtual function. > + > + max_vf: (RO) Max virtual functions > + > + cq_per_vf: (RO) Completion queue per virtual function > + > + iface: (RO) Shows which network interface this usNIC > + entry is associated to (visible with ifconfig). > + > +What: /sys/class/infiniband/usnic_X/qpn/summary > +What: /sys/class/infiniband/usnic_X/qpn/context > +Date: Sep, 2013 > +KernelVersion: v3.14 > +Contact: Christian Benvenuti <benve@xxxxxxxxx>, > + Dave Goodell <dgoodell@xxxxxxxxx>, > + linux-rdma@xxxxxxxxxxxxxxx > +Description: > + [to be documented] > + > + > +sysfs interface for Emulex RoCE HCA Driver > +------------------------------------------ > + > +What: /sys/class/infiniband/ocrdmaX/hw_rev > +Date: Feb, 2014 > +KernelVersion: v3.14 > +Description: > + hw_rev: (RO) Hardware revision number > + > +What: /sys/class/infiniband/ocrdmaX/hca_type > +Date: Jun, 2014 > +KernelVersion: v3.16 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + hca_type: (RO) Display FW version > + > + > +sysfs interface for Intel Omni-Path driver (HFI1) > +------------------------------------------------- > + > +What: /sys/class/infiniband/hfi1_X/hw_rev > +What: /sys/class/infiniband/hfi1_X/board_id > +What: /sys/class/infiniband/hfi1_X/nctxts > +What: /sys/class/infiniband/hfi1_X/serial > +What: /sys/class/infiniband/hfi1_X/chip_reset > +What: /sys/class/infiniband/hfi1_X/boardversion > +What: /sys/class/infiniband/hfi1_X/nfreectxts > +What: /sys/class/infiniband/hfi1_X/tempsense > +Date: May, 2016 > +KernelVersion: v4.6 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + hw_rev: (RO) Hardware revision number > + > + board_id: (RO) Manufacturing board id > + > + nctxts: (RO) Total contexts available. > + > + serial: (RO) Board serial number > + > + chip_reset: (WO) Write "reset" to this file to reset the > + chip if possible. Only allowed if no user > + contexts are open that use chip resources. > + > + boardversion: (RO) Human readable board info > + > + nfreectxts: (RO) The number of free user ports (contexts) > + available. > + > + tempsense: (RO) Thermal sense information > + > + > +What: /sys/class/infiniband/hfi1_X/ports/N/CCMgtA/cc_settings_bin > +What: /sys/class/infiniband/hfi1_X/ports/N/CCMgtA/cc_table_bin > +What: /sys/class/infiniband/hfi1_X/ports/N/CCMgtA/cc_prescan > +Date: May, 2016 > +KernelVersion: v4.6 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + Per-port congestion control. > + > + cc_table_bin: (RO) CCA tables used by PSM2 Congestion control > + table size followed by table entries. Binary > + attribute. > + > + cc_settings_bin:(RO) Congestion settings: port control, control > + map and an array of 16 entries for the > + congestion entries - increase, timer, event log > + trigger threshold and the minimum injection rate > + delay. Binary attribute. > + > + cc_prescan: (RW) enable prescanning for faster BECN > + response. Write "on" to enable and "off" to > + disable. > + > +What: /sys/class/infiniband/hfi1_X/ports/N/sc2vl/[0-31] > +What: /sys/class/infiniband/hfi1_X/ports/N/sl2sc/[0-31] > +What: /sys/class/infiniband/hfi1_X/ports/N/vl2mtu/[0-15] > +Date: May, 2016 > +KernelVersion: v4.6 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + sc2vl/: (RO) 32 files (0 - 31) used to translate sl->vl > + > + sl2sc/: (RO) 32 files (0 - 31) used to translate sl->sc > + > + vl2mtu/: (RO) 16 files (0 - 15) used to determine MTU for vl > + > + > +What: /sys/class/infiniband/hfi1_X/sdma_N/cpu_list > +What: /sys/class/infiniband/hfi1_X/sdma_N/vl > +Date: Sept, 2016 > +KernelVersion: v4.8 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + sdma<N>/ contains one directory per sdma engine (0 - 15) > + > + cpu_list: (RW) List of cpus for user-process to sdma > + engine assignment. > + > + vl: (RO) Displays the virtual lane (vl) the sdma > + engine maps to. > + > + > +sysfs interface for Intel(R) X722 iWARP i40iw driver > +---------------------------------------------------- > + > +What: /sys/class/infiniband/i40iwX/hw_rev > +What: /sys/class/infiniband/i40iwX/hca_type > +What: /sys/class/infiniband/i40iwX/board_id > +Date: Jan, 2016 > +KernelVersion: v4.10 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + hw_rev: (RO) Hardware revision number > + > + hca_tyoe: (RO) Show HCA type (I40IW) > + > + board_id: (RO) I40IW board ID > + > + > +sysfs interface for QLogic qedr NIC Driver > +------------------------------------------ > + > +What: /sys/class/infiniband/qedrX/hw_rev > +What: /sys/class/infiniband/qedrX/hca_type > +Date: Oct, 2016 > +KernelVersion: v4.10 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + > + hw_rev: (RO) Hardware revision number > + > + hca_type: (RO) Display HCA type > + > + > +sysfs interface for VMware Paravirtual RDMA driver > +-------------------------------------------------- > + > +What: /sys/class/infiniband/vmw_pvrdmaX/hw_rev > +What: /sys/class/infiniband/vmw_pvrdmaX/hca_type > +What: /sys/class/infiniband/vmw_pvrdmaX/board_id > +Date: Oct, 2016 > +KernelVersion: v4.10 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + > + hw_rev: (RO) Hardware revision number > + > + hca_type: (RO) Host channel adapter type > + > + board_id: (RO) Display PVRDMA manufacturing board ID > + > + > +sysfs interface for Broadcom NetXtreme-E RoCE driver > +---------------------------------------------------- > + > +What: /sys/class/infiniband/bnxt_reX/fw_rev > +What: /sys/class/infiniband/bnxt_reX/hw_rev > +What: /sys/class/infiniband/bnxt_reX/hca_type > +Date: Feb, 2017 > +KernelVersion: v4.11 > +Contact: linux-rdma@xxxxxxxxxxxxxxx > +Description: > + fw_rev: (RO) Firmware version > + > + hw_rev: (RO) Hardware revision number > + > + hca_type: (RO) Host channel adapter type > -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
