Right now, the description of the rapidio sysfs interfaces is in Documentation/rapidio/sysfs.txt. Since these are a part of the ABI, they should be in Documentation/ABI along with the rest. Signed-off-by: Aishwarya Pant <aishpant@xxxxxxxxx> --- Movement of sysfs interface is not absolutely necessary but this format adds some metadata (like kernel version, added date) which might be useful in scripting and tracking changes. Changes in v2: -Fix typo typr -> typo -Add context around enumerating devices' destid -Add destid attribute to list of common attributes -Edit description of binary attribute config -Add a line in Documentation/rapidio/sysfs.txt about movement of the sysfs ABI Documentation/ABI/testing/sysfs-bus-rapidio | 198 ++++++++++++++++++++++++++ Documentation/ABI/testing/sysfs-class-rapidio | 55 +++++++ Documentation/rapidio/sysfs.txt | 161 +-------------------- 3 files changed, 256 insertions(+), 158 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-rapidio create mode 100644 Documentation/ABI/testing/sysfs-class-rapidio diff --git a/Documentation/ABI/testing/sysfs-bus-rapidio b/Documentation/ABI/testing/sysfs-bus-rapidio new file mode 100644 index 000000000000..13208b27dd87 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-rapidio @@ -0,0 +1,198 @@ +What: /sys/bus/rapidio/devices/nn:d:iiii +Description: + For each RapidIO device, the RapidIO subsystem creates files in + an individual subdirectory with the following name format of + device_name "nn:d:iiii", where: + + nn - two-digit hexadecimal ID of RapidIO network where the + device resides + d - device type: 'e' - for endpoint or 's' - for switch + iiii - four-digit device destID for endpoints, or switchID for + switches + + For example, below is a list of device directories that + represents a typical RapidIO network with one switch, one host, + and two agent endpoints, as it is seen by the enumerating host + (with destID = 1): + + /sys/bus/rapidio/devices/00:e:0000 + /sys/bus/rapidio/devices/00:e:0002 + /sys/bus/rapidio/devices/00:s:0001 + + NOTE: An enumerating or discovering endpoint does not create a + sysfs entry for itself, this is why an endpoint with destID=1 is + not shown in the list. + +Attributes Common for All RapidIO Devices +----------------------------------------- + +What: /sys/bus/rapidio/devices/nn:d:iiii/did +Date: Nov, 2005 +KernelVersion: v2.6.15 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) returns the device identifier + +What: /sys/bus/rapidio/devices/nn:d:iiii/vid +Date: Nov, 2005 +KernelVersion: v2.6.15 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) returns the device vendor identifier + +What: /sys/bus/rapidio/devices/nn:d:iiii/device_rev +Date: Nov, 2005 +KernelVersion: v2.6.15 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) returns the device revision level + +What: /sys/bus/rapidio/devices/nn:d:iiii/asm_did +Date: Nov, 2005 +KernelVersion: v2.6.15 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) returns identifier for the assembly containing the device + +What: /sys/bus/rapidio/devices/nn:d:iiii/asm_rev +Date: Nov, 2005 +KernelVersion: v2.6.15 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) returns revision level of the assembly containing the + device + +What: /sys/bus/rapidio/devices/nn:d:iiii/asm_vid +Date: Nov, 2005 +KernelVersion: v2.6.15 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) returns vendor identifier of the assembly containing the + device + +What: /sys/bus/rapidio/devices/nn:d:iiii/destid +Date: Mar, 2011 +KernelVersion: v2.6.3 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) returns device destination ID assigned by the enumeration + routine + +What: /sys/bus/rapidio/devices/nn:d:iiii/lprev +Date: Mar, 2011 +KernelVersion: v2.6.39 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) returns name of previous device (switch) on the path to the + device that that owns this attribute + +What: /sys/bus/rapidio/devices/nn:d:iiii/modalias +Date: Jul, 2013 +KernelVersion: v3.11 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) returns the device modalias + +What: /sys/bus/rapidio/devices/nn:d:iiii/config +Date: Nov, 2005 +KernelVersion: v2.6.15 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RW) Binary attribute to read from and write to the device + configuration registers using the RapidIO maintenance + transactions. This attribute is similar in behaviour to the + "config" attribute of PCI devices and provides an access to the + RapidIO device registers using standard file read and write + operations. + +RapidIO Switch Device Attributes +-------------------------------- + +RapidIO switches have additional attributes in sysfs. RapidIO subsystem supports +common and device-specific sysfs attributes for switches. Because switches are +integrated into the RapidIO subsystem, it offers a method to create +device-specific sysfs attributes by specifying a callback function that may be +set by the switch initialization routine during enumeration or discovery +process. + +What: /sys/bus/rapidio/devices/nn:s:iiii/routes +Date: Nov, 2005 +KernelVersion: v2.6.15 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) reports switch routing information in "destID port" format. + This attribute reports only valid routing table entries, one + line for each entry. + +What: /sys/bus/rapidio/devices/nn:s:iiii/destid +Date: Mar, 2011 +KernelVersion: v2.6.3 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) device destination ID of the associated device that defines + a route to the switch + +What: /sys/bus/rapidio/devices/nn:s:iiii/hopcount +Date: Mar, 2011 +KernelVersion: v2.6.39 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) number of hops on the path to the switch + +What: /sys/bus/rapidio/devices/nn:s:iiii/lnext +Date: Mar, 2011 +KernelVersion: v2.6.39 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) returns names of devices linked to the switch except one of + a device linked to the ingress port (reported as "lprev"). This + is an array names with number of lines equal to number of ports + in switch. If a switch port has no attached device, returns + "null" instead of a device name. + +Device-specific Switch Attributes +--------------------------------- + +IDT_GEN2- + +What: /sys/bus/rapidio/devices/nn:s:iiii/errlog +Date: Oct, 2010 +KernelVersion: v2.6.37 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) reads contents of device error log until it is empty. + +RapidIO Bus Attributes +---------------------- + +What: /sys/bus/rapidio/scan +Date: May, 2013 +KernelVersion: v3.11 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (WO) Allows to trigger enumeration discovery process from user + space. To initiate an enumeration or discovery process on + specific mport device, a user needs to write mport_ID (not + RapidIO destination ID) into this file. The mport_ID is a + sequential number (0 ... RIO_MAX_MPORTS) assigned to the mport + device. For example, for a machine with a single RapidIO + controller, mport_ID for that controller always will be 0. To + initiate RapidIO enumeration/discovery on all available mports a + user must write '-1' (or RIO_MPORT_ANY) into this attribute + file. diff --git a/Documentation/ABI/testing/sysfs-class-rapidio b/Documentation/ABI/testing/sysfs-class-rapidio new file mode 100644 index 000000000000..8716beeb16c1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rapidio @@ -0,0 +1,55 @@ +What: /sys/class/rapidio_port +Description: + On-chip RapidIO controllers and PCIe-to-RapidIO bridges + (referenced as "Master Port" or "mport") are presented in sysfs + as the special class of devices: "rapidio_port". + The /sys/class/rapidio_port subdirectory contains individual + subdirectories named as "rapidioN" where N = mport ID registered + with RapidIO subsystem. + NOTE: An mport ID is not a RapidIO destination ID assigned to a + given local mport device. + +What: /sys/class/rapidio_port/rapidioN/sys_size +Date: Apr, 2014 +KernelVersion: v3.15 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) reports RapidIO common transport system size: + 0 = small (8-bit destination ID, max. 256 devices), + 1 = large (16-bit destination ID, max. 65536 devices). + +What: /sys/class/rapidio_port/rapidioN/port_destid +Date: Apr, 2014 +KernelVersion: v3.15 +Contact: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>, + Alexandre Bounine <alexandre.bounine@xxxxxxx> +Description: + (RO) reports RapidIO destination ID assigned to the given + RapidIO mport device. If value 0xFFFFFFFF is returned this means + that no valid destination ID have been assigned to the mport + (yet). Normally, before enumeration/discovery have been executed + only fabric enumerating mports have a valid destination ID + assigned to them using "hdid=..." rapidio module parameter. + +After enumeration or discovery was performed for a given mport device, +the corresponding subdirectory will also contain subdirectories for each +child RapidIO device connected to the mport. + +The example below shows mport device subdirectory with several child RapidIO +devices attached to it. + +[rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l +total 0 +drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0001 +drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0004 +drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0007 +drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0002 +drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0003 +drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0005 +lrwxrwxrwx 1 root root 0 Feb 11 15:11 device -> ../../../0000:01:00.0 +-r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid +drwxr-xr-x 2 root root 0 Feb 11 15:11 power +lrwxrwxrwx 1 root root 0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port +-r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size +-rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.txt index 47ce9a5336e1..a1adac888e6e 100644 --- a/Documentation/rapidio/sysfs.txt +++ b/Documentation/rapidio/sysfs.txt @@ -1,158 +1,3 @@ - RapidIO sysfs Files - -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -1. RapidIO Device Subdirectories --------------------------------- - -For each RapidIO device, the RapidIO subsystem creates files in an individual -subdirectory with the following name, /sys/bus/rapidio/devices/<device_name>. - -The format of device_name is "nn:d:iiii", where: - -nn - two-digit hexadecimal ID of RapidIO network where the device resides -d - device typr: 'e' - for endpoint or 's' - for switch -iiii - four-digit device destID for endpoints, or switchID for switches - -For example, below is a list of device directories that represents a typical -RapidIO network with one switch, one host, and two agent endpoints, as it is -seen by the enumerating host (destID = 1): - -/sys/bus/rapidio/devices/00:e:0000 -/sys/bus/rapidio/devices/00:e:0002 -/sys/bus/rapidio/devices/00:s:0001 - -NOTE: An enumerating or discovering endpoint does not create a sysfs entry for -itself, this is why an endpoint with destID=1 is not shown in the list. - -2. Attributes Common for All RapidIO Devices --------------------------------------------- - -Each device subdirectory contains the following informational read-only files: - - did - returns the device identifier - vid - returns the device vendor identifier -device_rev - returns the device revision level - asm_did - returns identifier for the assembly containing the device - asm_rev - returns revision level of the assembly containing the device - asm_vid - returns vendor identifier of the assembly containing the device - destid - returns device destination ID assigned by the enumeration routine - (see 4.1 for switch specific details) - lprev - returns name of previous device (switch) on the path to the device - that that owns this attribute - modalias - returns the device modalias - -In addition to the files listed above, each device has a binary attribute file -that allows read/write access to the device configuration registers using -the RapidIO maintenance transactions: - - config - reads from and writes to the device configuration registers. - -This attribute is similar in behavior to the "config" attribute of PCI devices -and provides an access to the RapidIO device registers using standard file read -and write operations. - -3. RapidIO Endpoint Device Attributes -------------------------------------- - -Currently Linux RapidIO subsystem does not create any endpoint specific sysfs -attributes. It is possible that RapidIO master port drivers and endpoint device -drivers will add their device-specific sysfs attributes but such attributes are -outside the scope of this document. - -4. RapidIO Switch Device Attributes ------------------------------------ - -RapidIO switches have additional attributes in sysfs. RapidIO subsystem supports -common and device-specific sysfs attributes for switches. Because switches are -integrated into the RapidIO subsystem, it offers a method to create -device-specific sysfs attributes by specifying a callback function that may be -set by the switch initialization routine during enumeration or discovery process. - -4.1 Common Switch Attributes - - routes - reports switch routing information in "destID port" format. This - attribute reports only valid routing table entries, one line for - each entry. - destid - device destination ID that defines a route to the switch - hopcount - number of hops on the path to the switch - lnext - returns names of devices linked to the switch except one of a device - linked to the ingress port (reported as "lprev"). This is an array - names with number of lines equal to number of ports in switch. If - a switch port has no attached device, returns "null" instead of - a device name. - -4.2 Device-specific Switch Attributes - -Device-specific switch attributes are listed for each RapidIO switch driver -that exports additional attributes. - -IDT_GEN2: - errlog - reads contents of device error log until it is empty. - - -5. RapidIO Bus Attributes -------------------------- - -RapidIO bus subdirectory /sys/bus/rapidio implements the following bus-specific -attribute: - - scan - allows to trigger enumeration discovery process from user space. This - is a write-only attribute. To initiate an enumeration or discovery - process on specific mport device, a user needs to write mport_ID (not - RapidIO destination ID) into this file. The mport_ID is a sequential - number (0 ... RIO_MAX_MPORTS) assigned to the mport device. - For example, for a machine with a single RapidIO controller, mport_ID - for that controller always will be 0. - To initiate RapidIO enumeration/discovery on all available mports - a user must write '-1' (or RIO_MPORT_ANY) into this attribute file. - - -6. RapidIO Bus Controllers/Ports --------------------------------- - -On-chip RapidIO controllers and PCIe-to-RapidIO bridges (referenced as -"Master Port" or "mport") are presented in sysfs as the special class of -devices: "rapidio_port". - -The /sys/class/rapidio_port subdirectory contains individual subdirectories -named as "rapidioN" where N = mport ID registered with RapidIO subsystem. - -NOTE: An mport ID is not a RapidIO destination ID assigned to a given local -mport device. - -Each mport device subdirectory in addition to standard entries contains the -following device-specific attributes: - - port_destid - reports RapidIO destination ID assigned to the given RapidIO - mport device. If value 0xFFFFFFFF is returned this means that - no valid destination ID have been assigned to the mport (yet). - Normally, before enumeration/discovery have been executed only - fabric enumerating mports have a valid destination ID assigned - to them using "hdid=..." rapidio module parameter. - sys_size - reports RapidIO common transport system size: - 0 = small (8-bit destination ID, max. 256 devices), - 1 = large (16-bit destination ID, max. 65536 devices). - -After enumeration or discovery was performed for a given mport device, -the corresponding subdirectory will also contain subdirectories for each -child RapidIO device connected to the mport. Naming conventions for RapidIO -devices are described in Section 1 above. - -The example below shows mport device subdirectory with several child RapidIO -devices attached to it. - -[rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l -total 0 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0001 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0004 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0007 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0002 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0003 -drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0005 -lrwxrwxrwx 1 root root 0 Feb 11 15:11 device -> ../../../0000:01:00.0 --r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid -drwxr-xr-x 2 root root 0 Feb 11 15:11 power -lrwxrwxrwx 1 root root 0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port --r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size --rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent +The RapidIO sysfs files have moved to: +Documentation/ABI/testing/sysfs-bus-rapidio and +Documentation/ABI/testing/sysfs-class-rapidio -- 2.16.0 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html