Re: [PATCH v2 1/2] acpi, spcr: Make SPCR avialable to other architectures

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday, December 11, 2017 4:50:58 PM CET Prarit Bhargava wrote:
> Other architectures can use SPCR to setup an early console or console
> but the current code is ARM64 specific.
> 
> Change the name of parse_spcr() to acpi_parse_spcr().  Add a weak
> function acpi_arch_setup_console() that can be used for arch-specific
> setup.  Move flags into ACPI code.  Update the Documention on the use of
> the SPCR.
> 
> [v2]: Don't return an error in the baud_rate check of acpi_parse_spcr().
> Keep ACPI_SPCR_TABLE selected for ARM64.  Fix 8-bit port access width
> mmio value.  Move baud rate check earlier.
> 
> Signed-off-by: Prarit Bhargava <prarit@xxxxxxxxxx>

This mostly affects ARM64, so ACKs from that side are requisite for it.

> Cc: linux-doc@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: linux-pm@xxxxxxxxxxxxxxx
> Cc: linux-acpi@xxxxxxxxxxxxxxx
> Cc: linux-serial@xxxxxxxxxxxxxxx
> Cc: Bhupesh Sharma <bhsharma@xxxxxxxxxx>
> Cc: Lv Zheng <lv.zheng@xxxxxxxxx>
> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
> Cc: x86@xxxxxxxxxx
> Cc: Jonathan Corbet <corbet@xxxxxxx>
> Cc: Catalin Marinas <catalin.marinas@xxxxxxx>
> Cc: Will Deacon <will.deacon@xxxxxxx>
> Cc: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
> Cc: Timur Tabi <timur@xxxxxxxxxxxxxx>
> ---
>  Documentation/admin-guide/kernel-parameters.txt |   6 +-
>  arch/arm64/kernel/acpi.c                        | 128 ++++++++++++++++-
>  drivers/acpi/Kconfig                            |   7 +-
>  drivers/acpi/spcr.c                             | 175 ++++++------------------
>  drivers/tty/serial/earlycon.c                   |  15 +-
>  include/linux/acpi.h                            |  11 +-
>  include/linux/serial_core.h                     |   2 -
>  7 files changed, 184 insertions(+), 160 deletions(-)
> 
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 6571fbfdb2a1..0d173289c67e 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -914,9 +914,9 @@
>  
>  	earlycon=	[KNL] Output early console device and options.
>  
> -			When used with no options, the early console is
> -			determined by the stdout-path property in device
> -			tree's chosen node.
> +			[ARM64] The early console is determined by the
> +			stdout-path property in device tree's chosen node,
> +			or determined by the ACPI SPCR table.
>  
>  		cdns,<addr>[,options]
>  			Start an early, polled-mode console on a Cadence
> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
> index b3162715ed78..b3e33bbdf3b7 100644
> --- a/arch/arm64/kernel/acpi.c
> +++ b/arch/arm64/kernel/acpi.c
> @@ -25,7 +25,6 @@
>  #include <linux/memblock.h>
>  #include <linux/of_fdt.h>
>  #include <linux/smp.h>
> -#include <linux/serial_core.h>
>  
>  #include <asm/cputype.h>
>  #include <asm/cpu_ops.h>
> @@ -177,6 +176,128 @@ static int __init acpi_fadt_sanity_check(void)
>  	return ret;
>  }
>  
> +/*
> + * Erratum 44 for QDF2432v1 and QDF2400v1 SoCs describes the BUSY bit as
> + * occasionally getting stuck as 1. To avoid the potential for a hang, check
> + * TXFE == 0 instead of BUSY == 1. This may not be suitable for all UART
> + * implementations, so only do so if an affected platform is detected in
> + * acpi_parse_spcr().
> + */
> +bool qdf2400_e44_present;
> +EXPORT_SYMBOL(qdf2400_e44_present);
> +
> +/*
> + * Some Qualcomm Datacenter Technologies SoCs have a defective UART BUSY bit.
> + * Detect them by examining the OEM fields in the SPCR header, similar to PCI
> + * quirk detection in pci_mcfg.c.
> + */
> +static bool qdf2400_erratum_44_present(struct acpi_table_header *h)
> +{
> +	if (memcmp(h->oem_id, "QCOM  ", ACPI_OEM_ID_SIZE))
> +		return false;
> +
> +	if (!memcmp(h->oem_table_id, "QDF2432 ", ACPI_OEM_TABLE_ID_SIZE))
> +		return true;
> +
> +	if (!memcmp(h->oem_table_id, "QDF2400 ", ACPI_OEM_TABLE_ID_SIZE) &&
> +			h->oem_revision == 1)
> +		return true;
> +
> +	return false;
> +}
> +
> +/*
> + * APM X-Gene v1 and v2 UART hardware is an 16550 like device but has its
> + * register aligned to 32-bit. In addition, the BIOS also encoded the
> + * access width to be 8 bits. This function detects this errata condition.
> + */
> +static bool xgene_8250_erratum_present(struct acpi_table_spcr *tb)
> +{
> +	bool xgene_8250 = false;
> +
> +	if (tb->interface_type != ACPI_DBG2_16550_COMPATIBLE)
> +		return false;
> +
> +	if (memcmp(tb->header.oem_id, "APMC0D", ACPI_OEM_ID_SIZE) &&
> +	    memcmp(tb->header.oem_id, "HPE   ", ACPI_OEM_ID_SIZE))
> +		return false;
> +
> +	if (!memcmp(tb->header.oem_table_id, "XGENESPC",
> +	    ACPI_OEM_TABLE_ID_SIZE) && tb->header.oem_revision == 0)
> +		xgene_8250 = true;
> +
> +	if (!memcmp(tb->header.oem_table_id, "ProLiant",
> +	    ACPI_OEM_TABLE_ID_SIZE) && tb->header.oem_revision == 1)
> +		xgene_8250 = true;
> +
> +	return xgene_8250;
> +}
> +
> +int acpi_arch_setup_console(struct acpi_table_spcr *table,
> +			    char *opts, char *uart, char *iotype,
> +			    int baud_rate, bool earlycon)
> +{
> +	if (table->header.revision < 2) {
> +		pr_err("wrong table version\n");
> +		return -ENOENT;
> +	}
> +
> +	switch (table->interface_type) {
> +	case ACPI_DBG2_ARM_SBSA_32BIT:
> +		snprintf(iotype, ACPI_SPCR_BUF_SIZE, "mmio32");
> +		/* fall through */
> +	case ACPI_DBG2_ARM_PL011:
> +	case ACPI_DBG2_ARM_SBSA_GENERIC:
> +	case ACPI_DBG2_BCM2835:
> +		snprintf(uart, ACPI_SPCR_BUF_SIZE, "pl011");
> +		break;
> +	default:
> +		if (strlen(uart) == 0)
> +			return -ENOENT;
> +	}
> +
> +	/*
> +	 * If the E44 erratum is required, then we need to tell the pl011
> +	 * driver to implement the work-around.
> +	 *
> +	 * The global variable is used by the probe function when it
> +	 * creates the UARTs, whether or not they're used as a console.
> +	 *
> +	 * If the user specifies "traditional" earlycon, the qdf2400_e44
> +	 * console name matches the EARLYCON_DECLARE() statement, and
> +	 * SPCR is not used.  Parameter "earlycon" is false.
> +	 *
> +	 * If the user specifies "SPCR" earlycon, then we need to update
> +	 * the console name so that it also says "qdf2400_e44".  Parameter
> +	 * "earlycon" is true.
> +	 *
> +	 * For consistency, if we change the console name, then we do it
> +	 * for everyone, not just earlycon.
> +	 */
> +	if (qdf2400_erratum_44_present(&table->header)) {
> +		qdf2400_e44_present = true;
> +		if (earlycon)
> +			snprintf(uart, ACPI_SPCR_BUF_SIZE, "qdf2400_e44");
> +	}
> +
> +	if (xgene_8250_erratum_present(table)) {
> +		snprintf(iotype, ACPI_SPCR_BUF_SIZE, "mmio32");
> +
> +		/* for xgene v1 and v2 we don't know the clock rate of the
> +		 * UART so don't attempt to change to the baud rate state
> +		 * in the table because driver cannot calculate the dividers
> +		 */
> +		snprintf(opts, ACPI_SPCR_OPTS_SIZE, "%s,%s,0x%llx", uart,
> +			 iotype, table->serial_port.address);
> +	} else {
> +		snprintf(opts, ACPI_SPCR_OPTS_SIZE, "%s,%s,0x%llx,%d", uart,
> +			 iotype, table->serial_port.address, baud_rate);
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(acpi_arch_setup_console);
> +
>  /*
>   * acpi_boot_table_init() called from setup_arch(), always.
>   *	1. find RSDP and get its address, and then find XSDT
> @@ -230,10 +351,11 @@ void __init acpi_boot_table_init(void)
>  
>  done:
>  	if (acpi_disabled) {
> -		if (earlycon_init_is_deferred)
> +		if (console_acpi_spcr_enable)
>  			early_init_dt_scan_chosen_stdout();
>  	} else {
> -		parse_spcr(earlycon_init_is_deferred);
> +		/* Always enable the ACPI SPCR console */
> +		acpi_parse_spcr(console_acpi_spcr_enable);
>  		if (IS_ENABLED(CONFIG_ACPI_BGRT))
>  			acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt);
>  	}
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 46505396869e..9ae98eeada76 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -79,7 +79,12 @@ config ACPI_DEBUGGER_USER
>  endif
>  
>  config ACPI_SPCR_TABLE
> -	bool
> +	bool "ACPI Serial Port Console Redirection Support"
> +	default y if ARM64
> +	help
> +	  Enable support for Serial Port Console Redirection (SPCR) Table.
> +	  This table provides information about the configuration of the
> +	  earlycon console.
>  
>  config ACPI_LPIT
>  	bool
> diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
> index 324b35bfe781..f4bb8110e404 100644
> --- a/drivers/acpi/spcr.c
> +++ b/drivers/acpi/spcr.c
> @@ -16,65 +16,18 @@
>  #include <linux/kernel.h>
>  #include <linux/serial_core.h>
>  
> -/*
> - * Erratum 44 for QDF2432v1 and QDF2400v1 SoCs describes the BUSY bit as
> - * occasionally getting stuck as 1. To avoid the potential for a hang, check
> - * TXFE == 0 instead of BUSY == 1. This may not be suitable for all UART
> - * implementations, so only do so if an affected platform is detected in
> - * parse_spcr().
> - */
> -bool qdf2400_e44_present;
> -EXPORT_SYMBOL(qdf2400_e44_present);
> -
> -/*
> - * Some Qualcomm Datacenter Technologies SoCs have a defective UART BUSY bit.
> - * Detect them by examining the OEM fields in the SPCR header, similiar to PCI
> - * quirk detection in pci_mcfg.c.
> - */
> -static bool qdf2400_erratum_44_present(struct acpi_table_header *h)
> -{
> -	if (memcmp(h->oem_id, "QCOM  ", ACPI_OEM_ID_SIZE))
> -		return false;
> -
> -	if (!memcmp(h->oem_table_id, "QDF2432 ", ACPI_OEM_TABLE_ID_SIZE))
> -		return true;
> -
> -	if (!memcmp(h->oem_table_id, "QDF2400 ", ACPI_OEM_TABLE_ID_SIZE) &&
> -			h->oem_revision == 1)
> -		return true;
> -
> -	return false;
> -}
> -
> -/*
> - * APM X-Gene v1 and v2 UART hardware is an 16550 like device but has its
> - * register aligned to 32-bit. In addition, the BIOS also encoded the
> - * access width to be 8 bits. This function detects this errata condition.
> - */
> -static bool xgene_8250_erratum_present(struct acpi_table_spcr *tb)
> +int __weak acpi_arch_setup_console(struct acpi_table_spcr *table,
> +				   char *opts, char *uart, char *iotype,
> +				   int baud_rate, bool earlycon)
>  {
> -	bool xgene_8250 = false;
> -
> -	if (tb->interface_type != ACPI_DBG2_16550_COMPATIBLE)
> -		return false;
> -
> -	if (memcmp(tb->header.oem_id, "APMC0D", ACPI_OEM_ID_SIZE) &&
> -	    memcmp(tb->header.oem_id, "HPE   ", ACPI_OEM_ID_SIZE))
> -		return false;
> -
> -	if (!memcmp(tb->header.oem_table_id, "XGENESPC",
> -	    ACPI_OEM_TABLE_ID_SIZE) && tb->header.oem_revision == 0)
> -		xgene_8250 = true;
> -
> -	if (!memcmp(tb->header.oem_table_id, "ProLiant",
> -	    ACPI_OEM_TABLE_ID_SIZE) && tb->header.oem_revision == 1)
> -		xgene_8250 = true;
> -
> -	return xgene_8250;
> +	snprintf(opts, ACPI_SPCR_OPTS_SIZE, "%s,%s,0x%llx,%d", uart, iotype,
> +		 table->serial_port.address, baud_rate);
> +	return 0;
>  }
>  
> +bool console_acpi_spcr_enable __initdata;
>  /**
> - * parse_spcr() - parse ACPI SPCR table and add preferred console
> + * acpi_parse_spcr() - parse ACPI SPCR table and add preferred console
>   *
>   * @earlycon: set up earlycon for the console specified by the table
>   *
> @@ -86,13 +39,13 @@ static bool xgene_8250_erratum_present(struct acpi_table_spcr *tb)
>   * from arch initialization code as soon as the DT/ACPI decision is made.
>   *
>   */
> -int __init parse_spcr(bool earlycon)
> +int __init acpi_parse_spcr(bool earlycon)
>  {
> -	static char opts[64];
> +	static char opts[ACPI_SPCR_OPTS_SIZE];
> +	static char uart[ACPI_SPCR_BUF_SIZE];
> +	static char iotype[ACPI_SPCR_BUF_SIZE];
>  	struct acpi_table_spcr *table;
>  	acpi_status status;
> -	char *uart;
> -	char *iotype;
>  	int baud_rate;
>  	int err;
>  
> @@ -105,48 +58,6 @@ int __init parse_spcr(bool earlycon)
>  	if (ACPI_FAILURE(status))
>  		return -ENOENT;
>  
> -	if (table->header.revision < 2) {
> -		err = -ENOENT;
> -		pr_err("wrong table version\n");
> -		goto done;
> -	}
> -
> -	if (table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
> -		switch (ACPI_ACCESS_BIT_WIDTH((
> -			table->serial_port.access_width))) {
> -		default:
> -			pr_err("Unexpected SPCR Access Width.  Defaulting to byte size\n");
> -		case 8:
> -			iotype = "mmio";
> -			break;
> -		case 16:
> -			iotype = "mmio16";
> -			break;
> -		case 32:
> -			iotype = "mmio32";
> -			break;
> -		}
> -	} else
> -		iotype = "io";
> -
> -	switch (table->interface_type) {
> -	case ACPI_DBG2_ARM_SBSA_32BIT:
> -		iotype = "mmio32";
> -		/* fall through */
> -	case ACPI_DBG2_ARM_PL011:
> -	case ACPI_DBG2_ARM_SBSA_GENERIC:
> -	case ACPI_DBG2_BCM2835:
> -		uart = "pl011";
> -		break;
> -	case ACPI_DBG2_16550_COMPATIBLE:
> -	case ACPI_DBG2_16550_SUBSET:
> -		uart = "uart";
> -		break;
> -	default:
> -		err = -ENOENT;
> -		goto done;
> -	}
> -
>  	switch (table->baud_rate) {
>  	case 3:
>  		baud_rate = 9600;
> @@ -165,43 +76,36 @@ int __init parse_spcr(bool earlycon)
>  		goto done;
>  	}
>  
> -	/*
> -	 * If the E44 erratum is required, then we need to tell the pl011
> -	 * driver to implement the work-around.
> -	 *
> -	 * The global variable is used by the probe function when it
> -	 * creates the UARTs, whether or not they're used as a console.
> -	 *
> -	 * If the user specifies "traditional" earlycon, the qdf2400_e44
> -	 * console name matches the EARLYCON_DECLARE() statement, and
> -	 * SPCR is not used.  Parameter "earlycon" is false.
> -	 *
> -	 * If the user specifies "SPCR" earlycon, then we need to update
> -	 * the console name so that it also says "qdf2400_e44".  Parameter
> -	 * "earlycon" is true.
> -	 *
> -	 * For consistency, if we change the console name, then we do it
> -	 * for everyone, not just earlycon.
> -	 */
> -	if (qdf2400_erratum_44_present(&table->header)) {
> -		qdf2400_e44_present = true;
> -		if (earlycon)
> -			uart = "qdf2400_e44";
> +	switch (table->interface_type) {
> +	case ACPI_DBG2_16550_COMPATIBLE:
> +	case ACPI_DBG2_16550_SUBSET:
> +		snprintf(uart, ACPI_SPCR_BUF_SIZE, "uart");
> +		break;
> +	default:
> +		break;
>  	}
>  
> -	if (xgene_8250_erratum_present(table)) {
> -		iotype = "mmio32";
> +	if (table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
> +		u8 width = ACPI_ACCESS_BIT_WIDTH((
> +					table->serial_port.access_width));
> +		switch (width) {
> +		default:
> +			pr_err("Unexpected SPCR Access Width.  Defaulting to byte size\n");
> +		case 8:
> +			snprintf(iotype, ACPI_SPCR_BUF_SIZE, "mmio");
> +			break;
> +		case 16:
> +		case 32:
> +			snprintf(iotype, ACPI_SPCR_BUF_SIZE, "mmio%d", width);
> +			break;
> +		}
> +	} else
> +		snprintf(iotype, ACPI_SPCR_BUF_SIZE, "io");
>  
> -		/* for xgene v1 and v2 we don't know the clock rate of the
> -		 * UART so don't attempt to change to the baud rate state
> -		 * in the table because driver cannot calculate the dividers
> -		 */
> -		snprintf(opts, sizeof(opts), "%s,%s,0x%llx", uart, iotype,
> -			 table->serial_port.address);
> -	} else {
> -		snprintf(opts, sizeof(opts), "%s,%s,0x%llx,%d", uart, iotype,
> -			 table->serial_port.address, baud_rate);
> -	}
> +	err = acpi_arch_setup_console(table, opts, uart, iotype, baud_rate,
> +				      earlycon);
> +	if (err)
> +		goto done;
>  
>  	pr_info("console: %s\n", opts);
>  
> @@ -209,7 +113,6 @@ int __init parse_spcr(bool earlycon)
>  		setup_earlycon(opts);
>  
>  	err = add_preferred_console(uart, 0, opts + strlen(uart) + 1);
> -
>  done:
>  	acpi_put_table((struct acpi_table_header *)table);
>  	return err;
> diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
> index 4c8b80f1c688..b22afb62c7a3 100644
> --- a/drivers/tty/serial/earlycon.c
> +++ b/drivers/tty/serial/earlycon.c
> @@ -196,26 +196,15 @@ int __init setup_earlycon(char *buf)
>  	return -ENOENT;
>  }
>  
> -/*
> - * When CONFIG_ACPI_SPCR_TABLE is defined, "earlycon" without parameters in
> - * command line does not start DT earlycon immediately, instead it defers
> - * starting it until DT/ACPI decision is made.  At that time if ACPI is enabled
> - * call parse_spcr(), else call early_init_dt_scan_chosen_stdout()
> - */
> -bool earlycon_init_is_deferred __initdata;
> -
>  /* early_param wrapper for setup_earlycon() */
>  static int __init param_setup_earlycon(char *buf)
>  {
>  	int err;
>  
> -	/*
> -	 * Just 'earlycon' is a valid param for devicetree earlycons;
> -	 * don't generate a warning from parse_early_params() in that case
> -	 */
> +	/* Just 'earlycon' is a valid param for devicetree and ACPI SPCR. */
>  	if (!buf || !buf[0]) {
>  		if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) {
> -			earlycon_init_is_deferred = true;
> +			console_acpi_spcr_enable = true;
>  			return 0;
>  		} else if (!buf) {
>  			return early_init_dt_scan_chosen_stdout();
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index dc1ebfeeb5ec..875d7327d91c 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -1241,10 +1241,17 @@ static inline bool acpi_has_watchdog(void) { return false; }
>  #endif
>  
>  #ifdef CONFIG_ACPI_SPCR_TABLE
> +#define ACPI_SPCR_OPTS_SIZE 64
> +#define ACPI_SPCR_BUF_SIZE 32
>  extern bool qdf2400_e44_present;
> -int parse_spcr(bool earlycon);
> +extern bool console_acpi_spcr_enable __initdata;
> +extern int acpi_arch_setup_console(struct acpi_table_spcr *table,
> +				   char *opts, char *uart, char *iotype,
> +				   int baud_rate, bool earlycon);
> +int acpi_parse_spcr(bool earlycon);
>  #else
> -static inline int parse_spcr(bool earlycon) { return 0; }
> +static const bool console_acpi_spcr_enable;
> +static inline int acpi_parse_spcr(bool earlycon) { return 0; }
>  #endif
>  
>  #if IS_ENABLED(CONFIG_ACPI_GENERIC_GSI)
> diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
> index 37b044e78333..abfffb4b1c37 100644
> --- a/include/linux/serial_core.h
> +++ b/include/linux/serial_core.h
> @@ -376,10 +376,8 @@ extern int of_setup_earlycon(const struct earlycon_id *match,
>  			     const char *options);
>  
>  #ifdef CONFIG_SERIAL_EARLYCON
> -extern bool earlycon_init_is_deferred __initdata;
>  int setup_earlycon(char *buf);
>  #else
> -static const bool earlycon_init_is_deferred;
>  static inline int setup_earlycon(char *buf) { return 0; }
>  #endif
>  
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux