From: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
This controller driver programs manager, interface, and framer
devices for Qualcomm's slimbus HW block.
Manager component currently implements logical address setting,
and messaging interface.
Interface device reports bus synchronization information, and framer
device clocks the bus from the time it's woken up, until clock-pause
is executed by the manager device.
Signed-off-by: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
drivers/slimbus/Kconfig | 6 +
drivers/slimbus/Makefile | 4 +
drivers/slimbus/qcom-ctrl.c | 655 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 665 insertions(+)
create mode 100644 drivers/slimbus/qcom-ctrl.c
diff --git a/drivers/slimbus/Kconfig b/drivers/slimbus/Kconfig
index 9b6bb84d66ed..78bdd4808282 100644
--- a/drivers/slimbus/Kconfig
+++ b/drivers/slimbus/Kconfig
@@ -13,5 +13,11 @@ menuconfig SLIMBUS
if SLIMBUS
# SLIMbus controllers
+config SLIM_QCOM_CTRL
+ tristate "Qualcomm SLIMbus Manager Component"
+ depends on SLIMBUS
+ help
+ Select driver if Qualcomm's SLIMbus Manager Component is
+ programmed using Linux kernel.
endif
diff --git a/drivers/slimbus/Makefile b/drivers/slimbus/Makefile
index cd6833ed521a..a35a3da4eb78 100644
--- a/drivers/slimbus/Makefile
+++ b/drivers/slimbus/Makefile
@@ -4,3 +4,7 @@
#
obj-$(CONFIG_SLIMBUS) += slimbus.o
slimbus-y := core.o messaging.o sched.o
+
+#Controllers
+obj-$(CONFIG_SLIM_QCOM_CTRL) += slim-qcom-ctrl.o
+slim-qcom-ctrl-y := qcom-ctrl.o
diff --git a/drivers/slimbus/qcom-ctrl.c b/drivers/slimbus/qcom-ctrl.c
new file mode 100644
index 000000000000..ace85ce3de90
--- /dev/null
+++ b/drivers/slimbus/qcom-ctrl.c
@@ -0,0 +1,655 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2011-2017, The Linux Foundation
+ */
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/dma-mapping.h>
+#include "slimbus.h"
+
+/* Manager registers */
+#define MGR_CFG 0x200
+#define MGR_STATUS 0x204
+#define MGR_INT_EN 0x210
+#define MGR_INT_STAT 0x214
+#define MGR_INT_CLR 0x218
+#define MGR_TX_MSG 0x230
+#define MGR_RX_MSG 0x270
+#define MGR_IE_STAT 0x2F0
+#define MGR_VE_STAT 0x300
+#define MGR_CFG_ENABLE 1
+
+/* Framer registers */
+#define FRM_CFG 0x400
+#define FRM_STAT 0x404
+#define FRM_INT_EN 0x410
+#define FRM_INT_STAT 0x414
+#define FRM_INT_CLR 0x418
+#define FRM_WAKEUP 0x41C
+#define FRM_CLKCTL_DONE 0x420
+#define FRM_IE_STAT 0x430
+#define FRM_VE_STAT 0x440
+
+/* Interface registers */
+#define INTF_CFG 0x600
+#define INTF_STAT 0x604
+#define INTF_INT_EN 0x610
+#define INTF_INT_STAT 0x614
+#define INTF_INT_CLR 0x618
+#define INTF_IE_STAT 0x630
+#define INTF_VE_STAT 0x640
+
+/* Interrupt status bits */
+#define MGR_INT_TX_NACKED_2 BIT(25)
+#define MGR_INT_MSG_BUF_CONTE BIT(26)
+#define MGR_INT_RX_MSG_RCVD BIT(30)
+#define MGR_INT_TX_MSG_SENT BIT(31)
+
+/* Framer config register settings */
+#define FRM_ACTIVE 1
+#define CLK_GEAR 7
+#define ROOT_FREQ 11
+#define REF_CLK_GEAR 15
+#define INTR_WAKE 19
+
+#define SLIM_MSG_ASM_FIRST_WORD(l, mt, mc, dt, ad) \
+ ((l) | ((mt) << 5) | ((mc) << 8) | ((dt) << 15) | ((ad) << 16))
+
+#define SLIM_ROOT_FREQ 24576000
+
+/* MAX message size over control channel */
+#define SLIM_MSGQ_BUF_LEN 40
+#define QCOM_TX_MSGS 2
+#define QCOM_RX_MSGS 8
+#define QCOM_BUF_ALLOC_RETRIES 10
+
+#define CFG_PORT(r, v) ((v) ? CFG_PORT_V2(r) : CFG_PORT_V1(r))
+
+/* V2 Component registers */
+#define CFG_PORT_V2(r) ((r ## _V2))
+#define COMP_CFG_V2 4
+#define COMP_TRUST_CFG_V2 0x3000
+
+/* V1 Component registers */
+#define CFG_PORT_V1(r) ((r ## _V1))
+#define COMP_CFG_V1 0
+#define COMP_TRUST_CFG_V1 0x14
+
+/* Resource group info for manager, and non-ported generic device-components */
+#define EE_MGR_RSC_GRP (1 << 10)
+#define EE_NGD_2 (2 << 6)
+#define EE_NGD_1 0
+
+struct slim_ctrl_buf {
+ void *base;
+ phys_addr_t phy;
+ spinlock_t lock;
+ int head;
+ int tail;
+ int sl_sz;
+ int n;
+};
+
+struct qcom_slim_ctrl {
+ struct slim_controller ctrl;
+ struct slim_framer framer;
+ struct device *dev;
+ void __iomem *base;
+ void __iomem *slew_reg;
+
+ struct slim_ctrl_buf rx;
+ struct slim_ctrl_buf tx;
+
+ struct completion **wr_comp;
+ int irq;
+ struct workqueue_struct *rxwq;
+ struct work_struct wd;
+ struct clk *rclk;
+ struct clk *hclk;
+};
+
+static void qcom_slim_queue_tx(struct qcom_slim_ctrl *ctrl, void *buf,
+ u8 len, u32 tx_reg)
+{
+ int count = (len + 3) >> 2;
+
+ __iowrite32_copy(ctrl->base + tx_reg, buf, count);
+
+ /* Ensure Oder of subsequent writes */
+ mb();
+}
+
+static void *slim_alloc_rxbuf(struct qcom_slim_ctrl *ctrl)
+{
+ unsigned long flags;
+ int idx;
+
+ spin_lock_irqsave(&ctrl->rx.lock, flags);
+ if ((ctrl->rx.tail + 1) % ctrl->rx.n == ctrl->rx.head) {
+ spin_unlock_irqrestore(&ctrl->rx.lock, flags);
+ dev_err(ctrl->dev, "RX QUEUE full!");
+ return NULL;
+ }
+ idx = ctrl->rx.tail;
+ ctrl->rx.tail = (ctrl->rx.tail + 1) % ctrl->rx.n;
+ spin_unlock_irqrestore(&ctrl->rx.lock, flags);
+
+ return ctrl->rx.base + (idx * ctrl->rx.sl_sz);
+}
+
+void slim_ack_txn(struct qcom_slim_ctrl *ctrl, int err)
+{
+ struct completion *comp;
+ unsigned long flags;
+ int idx;
+
+ spin_lock_irqsave(&ctrl->tx.lock, flags);
+ idx = ctrl->tx.head;
+ ctrl->tx.head = (ctrl->tx.head + 1) % ctrl->tx.n;
+ spin_unlock_irqrestore(&ctrl->tx.lock, flags);
+
+ comp = ctrl->wr_comp[idx];
+ ctrl->wr_comp[idx] = NULL;
+
+ complete(comp);
+}
+
+static irqreturn_t qcom_slim_handle_tx_irq(struct qcom_slim_ctrl *ctrl,
+ u32 stat)
+{
+ int err = 0;
+
+ if (stat & MGR_INT_TX_MSG_SENT)
+ writel_relaxed(MGR_INT_TX_MSG_SENT,
+ ctrl->base + MGR_INT_CLR);
+
+ if (stat & MGR_INT_TX_NACKED_2) {
+ u32 mgr_stat = readl_relaxed(ctrl->base + MGR_STATUS);
+ u32 mgr_ie_stat = readl_relaxed(ctrl->base + MGR_IE_STAT);
+ u32 frm_stat = readl_relaxed(ctrl->base + FRM_STAT);
+ u32 frm_cfg = readl_relaxed(ctrl->base + FRM_CFG);
+ u32 frm_intr_stat = readl_relaxed(ctrl->base + FRM_INT_STAT);
+ u32 frm_ie_stat = readl_relaxed(ctrl->base + FRM_IE_STAT);
+ u32 intf_stat = readl_relaxed(ctrl->base + INTF_STAT);
+ u32 intf_intr_stat = readl_relaxed(ctrl->base + INTF_INT_STAT);
+ u32 intf_ie_stat = readl_relaxed(ctrl->base + INTF_IE_STAT);
+
+ writel_relaxed(MGR_INT_TX_NACKED_2, ctrl->base + MGR_INT_CLR);
+
+ dev_err(ctrl->dev, "TX Nack MGR:int:0x%x, stat:0x%x\n",
+ stat, mgr_stat);
+ dev_err(ctrl->dev, "TX Nack MGR:ie:0x%x\n", mgr_ie_stat);
+ dev_err(ctrl->dev, "TX Nack FRM:int:0x%x, stat:0x%x\n",
+ frm_intr_stat, frm_stat);
+ dev_err(ctrl->dev, "TX Nack FRM:cfg:0x%x, ie:0x%x\n",
+ frm_cfg, frm_ie_stat);
+ dev_err(ctrl->dev, "TX Nack INTF:intr:0x%x, stat:0x%x\n",
+ intf_intr_stat, intf_stat);
+ dev_err(ctrl->dev, "TX Nack INTF:ie:0x%x\n",
+ intf_ie_stat);
+ err = -ENOTCONN;
+ }
+
+ slim_ack_txn(ctrl, err);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_slim_handle_rx_irq(struct qcom_slim_ctrl *ctrl,
+ u32 stat)
+{
+ u32 *rx_buf, pkt[10];
+ bool q_rx = false;
+ u8 mc, mt, len;
+
+ pkt[0] = readl_relaxed(ctrl->base + MGR_RX_MSG);
+ mt = SLIM_HEADER_GET_MT(pkt[0]);
+ len = SLIM_HEADER_GET_RL(pkt[0]);
+ mc = SLIM_HEADER_GET_MC(pkt[0]>>8);
+
+ /*
+ * this message cannot be handled by ISR, so
+ * let work-queue handle it
+ */
+ if (mt == SLIM_MSG_MT_CORE && mc == SLIM_MSG_MC_REPORT_PRESENT) {
+ rx_buf = (u32 *)slim_alloc_rxbuf(ctrl);
+ if (!rx_buf) {
+ dev_err(ctrl->dev, "dropping RX:0x%x due to RX full\n",
+ pkt[0]);
+ goto rx_ret_irq;
+ }
+ rx_buf[0] = pkt[0];
+
+ } else {
+ rx_buf = pkt;
+ }
+
+ __ioread32_copy(rx_buf + 1, ctrl->base + MGR_RX_MSG + 4,
+ DIV_ROUND_UP(len, 4));
+
+ switch (mc) {
+
+ case SLIM_MSG_MC_REPORT_PRESENT:
+ q_rx = true;
+ break;
+ case SLIM_MSG_MC_REPLY_INFORMATION:
+ case SLIM_MSG_MC_REPLY_VALUE:
+ slim_msg_response(&ctrl->ctrl, (u8 *)(rx_buf + 1),
+ (u8)(*rx_buf >> 24), (len - 4));
+ break;
+ default:
+ dev_err(ctrl->dev, "unsupported MC,%x MT:%x\n",
+ mc, mt);
+ break;
+ }
+rx_ret_irq:
+ writel(MGR_INT_RX_MSG_RCVD, ctrl->base +
+ MGR_INT_CLR);
+ if (q_rx)
+ queue_work(ctrl->rxwq, &ctrl->wd);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_slim_interrupt(int irq, void *d)
+{
+ struct qcom_slim_ctrl *ctrl = d;
+ u32 stat = readl_relaxed(ctrl->base + MGR_INT_STAT);
+ int ret = IRQ_NONE;
+
+ if (stat & MGR_INT_TX_MSG_SENT || stat & MGR_INT_TX_NACKED_2)
+ ret = qcom_slim_handle_tx_irq(ctrl, stat);
+
+ if (stat & MGR_INT_RX_MSG_RCVD)
+ ret = qcom_slim_handle_rx_irq(ctrl, stat);
+
+ return ret;
+}
+
+void *slim_alloc_txbuf(struct qcom_slim_ctrl *ctrl, struct slim_msg_txn *txn,
+ struct completion *done)
+{
+ unsigned long flags;
+ int idx;
+
+ spin_lock_irqsave(&ctrl->tx.lock, flags);
+ if (((ctrl->tx.head + 1) % ctrl->tx.n) == ctrl->tx.tail) {
+ spin_unlock_irqrestore(&ctrl->tx.lock, flags);
+ dev_err(ctrl->dev, "controller TX buf unavailable");
+ return NULL;
+ }
+ idx = ctrl->tx.tail;
+ ctrl->wr_comp[idx] = done;
+ ctrl->tx.tail = (ctrl->tx.tail + 1) % ctrl->tx.n;
+
+ spin_unlock_irqrestore(&ctrl->tx.lock, flags);
+
+ return ctrl->tx.base + (idx * ctrl->tx.sl_sz);
+}
+
+
+static int qcom_xfer_msg(struct slim_controller *sctrl,
+ struct slim_msg_txn *txn)
+{
+ struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev);
+ DECLARE_COMPLETION_ONSTACK(done);
+ void *pbuf = slim_alloc_txbuf(ctrl, txn, &done);
+ unsigned long ms = txn->rl + HZ;
+ u8 *puc;
+ int ret = 0, timeout, retries = QCOM_BUF_ALLOC_RETRIES;
+ u8 la = txn->la;
+ u32 *head;
+ /* HW expects length field to be excluded */
+ txn->rl--;
+
+ /* spin till buffer is made available */
+ if (!pbuf) {
+ while (retries--) {
+ usleep_range(10000, 15000);
+ pbuf = slim_alloc_txbuf(ctrl, txn, &done);
+ if (pbuf)
+ break;
+ }
+ }
+
+ if (!retries && !pbuf)
+ return -ENOMEM;
+
+ puc = (u8 *)pbuf;
+ head = (u32 *)pbuf;
+
+ if (txn->dt == SLIM_MSG_DEST_LOGICALADDR) {
+ *head = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt,
+ txn->mc, 0, la);
+ puc += 3;
+ } else {
+ *head = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt,
+ txn->mc, 1, la);
+ puc += 2;
+ }
+
+ if (slim_tid_txn(txn->mt, txn->mc))
+ *(puc++) = txn->tid;
+
+ if (slim_ec_txn(txn->mt, txn->mc)) {
+ *(puc++) = (txn->ec & 0xFF);
+ *(puc++) = (txn->ec >> 8) & 0xFF;
+ }
+
+ if (txn->msg && txn->msg->wbuf)
+ memcpy(puc, txn->msg->wbuf, txn->msg->num_bytes);
+
+ qcom_slim_queue_tx(ctrl, head, txn->rl, MGR_TX_MSG);
+ timeout = wait_for_completion_timeout(&done, msecs_to_jiffies(ms));
+
+ if (!timeout) {
+ dev_err(ctrl->dev, "TX timed out:MC:0x%x,mt:0x%x", txn->mc,
+ txn->mt);
+ ret = -ETIMEDOUT;
+ }
+
+ return ret;
+
+}
+
+static int qcom_set_laddr(struct slim_controller *sctrl,
+ struct slim_eaddr *ead, u8 laddr)
+{
+ struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev);
+ struct {
+ __be16 manf_id;
+ __be16 prod_code;
+ u8 dev_index;
+ u8 instance;
+ u8 laddr;
+ } __packed p;
+ struct slim_val_inf msg = {0};
+ DEFINE_SLIM_EDEST_TXN(txn, SLIM_MSG_MC_ASSIGN_LOGICAL_ADDRESS,
+ 10, laddr, &msg);
+ int ret;
+
+ p.manf_id = cpu_to_be16(ead->manf_id);
+ p.prod_code = cpu_to_be16(ead->prod_code);
+ p.dev_index = ead->dev_index;
+ p.instance = ead->instance;
+ p.laddr = laddr;
+
+ msg.wbuf = (void *)&p;
+ msg.num_bytes = 7;
+ ret = slim_do_transfer(&ctrl->ctrl, &txn);
+
+ if (ret)
+ dev_err(ctrl->dev, "set LA:0x%x failed:ret:%d\n",
+ laddr, ret);
+ return ret;
+}
+
+static int slim_get_current_rxbuf(struct qcom_slim_ctrl *ctrl, void *buf)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctrl->rx.lock, flags);
+ if (ctrl->rx.tail == ctrl->rx.head) {
+ spin_unlock_irqrestore(&ctrl->rx.lock, flags);
+ return -ENODATA;
+ }
+ memcpy(buf, ctrl->rx.base + (ctrl->rx.head * ctrl->rx.sl_sz),
+ ctrl->rx.sl_sz);
+
+ ctrl->rx.head = (ctrl->rx.head + 1) % ctrl->rx.n;
+ spin_unlock_irqrestore(&ctrl->rx.lock, flags);
+
+ return 0;
+}
+
+static void qcom_slim_rxwq(struct work_struct *work)
+{
+ u8 buf[SLIM_MSGQ_BUF_LEN];
+ u8 mc, mt, len;
+ int ret;
+ struct qcom_slim_ctrl *ctrl = container_of(work, struct qcom_slim_ctrl,
+ wd);
+
+ while ((slim_get_current_rxbuf(ctrl, buf)) != -ENODATA) {
+ len = SLIM_HEADER_GET_RL(buf[0]);
+ mt = SLIM_HEADER_GET_MT(buf[0]);
+ mc = SLIM_HEADER_GET_MC(buf[1]);
+ if (mt == SLIM_MSG_MT_CORE &&
+ mc == SLIM_MSG_MC_REPORT_PRESENT) {
+ struct slim_eaddr ea;
+ u8 laddr;
+
+ ea.manf_id = be16_to_cpup((__be16 *)&buf[2]);
+ ea.prod_code = be16_to_cpup((__be16 *)&buf[4]);
+ ea.dev_index = buf[6];
+ ea.instance = buf[7];
+
+ ret = slim_device_report_present(&ctrl->ctrl, &ea,
+ &laddr);
+ if (ret < 0)
+ dev_err(ctrl->dev, "assign laddr failed:%d\n",
+ ret);
+ } else {
+ dev_err(ctrl->dev, "unexpected message:mc:%x, mt:%x\n",
+ mc, mt);
+ }
+ }
+}
+
+static void qcom_slim_prg_slew(struct platform_device *pdev,
+ struct qcom_slim_ctrl *ctrl)
+{
+ struct resource *slew_mem;
+
+ if (!ctrl->slew_reg) {
+ /* SLEW RATE register for this SLIMbus */
+ slew_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "slew");
+ ctrl->slew_reg = devm_ioremap(&pdev->dev, slew_mem->start,
+ resource_size(slew_mem));
+ if (!ctrl->slew_reg)
+ return;
+ }
+
+ writel_relaxed(1, ctrl->slew_reg);
+ /* Make sure SLIMbus-slew rate enabling goes through */
+ wmb();
+}
+
+static int qcom_slim_probe(struct platform_device *pdev)
+{
+ struct qcom_slim_ctrl *ctrl;
+ struct slim_controller *sctrl;
+ struct resource *slim_mem;
+ int ret, ver;
+
+ ctrl = devm_kzalloc(&pdev->dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
+
+ ctrl->hclk = devm_clk_get(&pdev->dev, "iface");
+ if (IS_ERR(ctrl->hclk))
+ return PTR_ERR(ctrl->hclk);
+
+ ctrl->rclk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(ctrl->rclk))
+ return PTR_ERR(ctrl->rclk);
+
+ ret = clk_set_rate(ctrl->rclk, SLIM_ROOT_FREQ);
+ if (ret) {
+ dev_err(&pdev->dev, "ref-clock set-rate failed:%d\n", ret);
+ return ret;
+ }
+
+ ctrl->irq = platform_get_irq(pdev, 0);
+ if (!ctrl->irq) {
+ dev_err(&pdev->dev, "no slimbus IRQ\n");
+ return -ENODEV;
+ }
+
+ sctrl = &ctrl->ctrl;
+ sctrl->dev = &pdev->dev;
+ ctrl->dev = &pdev->dev;
+ platform_set_drvdata(pdev, ctrl);
+ dev_set_drvdata(ctrl->dev, ctrl);
+
+ slim_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
+ ctrl->base = devm_ioremap_resource(ctrl->dev, slim_mem);
+ if (!ctrl->base) {
+ dev_err(&pdev->dev, "IOremap failed\n");
+ return -ENOMEM;
+ }
+
+ sctrl->set_laddr = qcom_set_laddr;
+ sctrl->xfer_msg = qcom_xfer_msg;
+ ctrl->tx.n = QCOM_TX_MSGS;
+ ctrl->tx.sl_sz = SLIM_MSGQ_BUF_LEN;
+ ctrl->rx.n = QCOM_RX_MSGS;
+ ctrl->rx.sl_sz = SLIM_MSGQ_BUF_LEN;
+ ctrl->wr_comp = kzalloc(sizeof(struct completion *) * QCOM_TX_MSGS,
+ GFP_KERNEL);
+ if (!ctrl->wr_comp)
+ return -ENOMEM;
+
+ spin_lock_init(&ctrl->rx.lock);
+ spin_lock_init(&ctrl->tx.lock);
+ INIT_WORK(&ctrl->wd, qcom_slim_rxwq);
+ ctrl->rxwq = create_singlethread_workqueue("qcom_slim_rx");
+ if (!ctrl->rxwq) {
+ dev_err(ctrl->dev, "Failed to start Rx WQ\n");
+ return -ENOMEM;
+ }
+
+ ctrl->framer.rootfreq = SLIM_ROOT_FREQ / 8;
+ ctrl->framer.superfreq =
+ ctrl->framer.rootfreq / SLIM_CL_PER_SUPERFRAME_DIV8;
+ sctrl->a_framer = &ctrl->framer;
+ sctrl->clkgear = SLIM_MAX_CLK_GEAR;
+
+ qcom_slim_prg_slew(pdev, ctrl);
+
+ ret = devm_request_irq(&pdev->dev, ctrl->irq, qcom_slim_interrupt,
+ IRQF_TRIGGER_HIGH, "qcom_slim_irq", ctrl);
+ if (ret) {
+ dev_err(&pdev->dev, "request IRQ failed\n");
+ goto err_request_irq_failed;
+ }
+
+ ret = clk_prepare_enable(ctrl->hclk);
+ if (ret)
+ goto err_hclk_enable_failed;
+
+ ret = clk_prepare_enable(ctrl->rclk);
+ if (ret)
+ goto err_rclk_enable_failed;
+
+ ctrl->tx.base = dmam_alloc_coherent(&pdev->dev,
+ (ctrl->tx.sl_sz * ctrl->tx.n),
+ &ctrl->tx.phy, GFP_KERNEL);
+ if (!ctrl->tx.base) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ctrl->rx.base = dmam_alloc_coherent(&pdev->dev,
+ (ctrl->rx.sl_sz * ctrl->rx.n),
+ &ctrl->rx.phy, GFP_KERNEL);
+ if (!ctrl->rx.base) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ /* Register with framework before enabling frame, clock */
+ ret = slim_register_controller(&ctrl->ctrl);
+ if (ret) {
+ dev_err(ctrl->dev, "error adding controller\n");
+ goto err;
+ }
+
+ ver = readl_relaxed(ctrl->base);
+ /* Version info in 16 MSbits */
+ ver >>= 16;
+ /* Component register initialization */
+ writel(1, ctrl->base + CFG_PORT(COMP_CFG, ver));
+ writel((EE_MGR_RSC_GRP | EE_NGD_2 | EE_NGD_1),
+ ctrl->base + CFG_PORT(COMP_TRUST_CFG, ver));
+
+ writel((MGR_INT_TX_NACKED_2 |
+ MGR_INT_MSG_BUF_CONTE | MGR_INT_RX_MSG_RCVD |
+ MGR_INT_TX_MSG_SENT), ctrl->base + MGR_INT_EN);
+ writel(1, ctrl->base + MGR_CFG);
+ /* Framer register initialization */
+ writel((1 << INTR_WAKE) | (0xA << REF_CLK_GEAR) |
+ (0xA << CLK_GEAR) | (1 << ROOT_FREQ) | (1 << FRM_ACTIVE) | 1,
+ ctrl->base + FRM_CFG);
+ writel(MGR_CFG_ENABLE, ctrl->base + MGR_CFG);
+ writel(1, ctrl->base + INTF_CFG);
+ writel(1, ctrl->base + CFG_PORT(COMP_CFG, ver));
+
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, QCOM_SLIM_AUTOSUSPEND);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ dev_dbg(ctrl->dev, "QCOM SB controller is up:ver:0x%x!\n", ver);
+ return 0;
+
+err:
+ clk_disable_unprepare(ctrl->rclk);
+err_rclk_enable_failed:
+ clk_disable_unprepare(ctrl->hclk);
+err_hclk_enable_failed:
+err_request_irq_failed:
+ destroy_workqueue(ctrl->rxwq);
+ return ret;
+}
+
+static int qcom_slim_remove(struct platform_device *pdev)
+{
+ struct qcom_slim_ctrl *ctrl = platform_get_drvdata(pdev);
+
+ disable_irq(ctrl->irq);
+ clk_disable_unprepare(ctrl->hclk);
+ clk_disable_unprepare(ctrl->rclk);
+ slim_unregister_controller(&ctrl->ctrl);
+ destroy_workqueue(ctrl->rxwq);
+ return 0;
+}
+
+static const struct dev_pm_ops qcom_slim_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(qcom_slim_suspend, qcom_slim_resume)
+ SET_RUNTIME_PM_OPS(
+ qcom_slim_runtime_suspend,
+ qcom_slim_runtime_resume,
+ NULL
+ )
+};
+
+static const struct of_device_id qcom_slim_dt_match[] = {
+ { .compatible = "qcom,slim", },
+ { .compatible = "qcom,apq8064-slim", },
+ {}
+};
+
+static struct platform_driver qcom_slim_driver = {
+ .probe = qcom_slim_probe,
+ .remove = qcom_slim_remove,
+ .driver = {
+ .name = "qcom_slim_ctrl",
+ .of_match_table = qcom_slim_dt_match,
+ },
+};
+module_platform_driver(qcom_slim_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Qualcomm SLIMbus Controller");
--
2.15.0
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
