On Sunday, December 3, 2017 11:56:40 PM CET Ognjen Galic wrote:
> Add support for the ACPI batteries on newer thinkpad models
> (>Sandy Bridge) that support the setting of start and stop
> thresholds.
>
> The actual interface to the driver is a extension for the
> existing ACPI battery driver. This was done so that users
> can write transparently to the interface of the ACPI battery
> driver and dont have to use some private interface
> (for ex. /sys/devices/platform/thinkpad_acpi/).
>
> Two new interfaces are created:
>
> /sys/class/power_supply/BAT{0,1}/charge_start_threshold
> /sys/class/power_supply/BAT{0,1}/charge_stop_threshold
>
> The ACPI battery driver won't expose the interface unless
> DMI says that the machine is a Lenovo ThinkPad. This was done
> so that distributions that distribute thinkpad_acpi don't
> expose the API on non-ThinkPad laptops.
>
> v2: Forgot to signoff, fixed that
>
> Signed-off-by: Ognjen Galic <smclt30p@xxxxxxxxx>
> ---
> Documentation/laptops/thinkpad-acpi.txt | 16 ++
> drivers/acpi/battery.c | 227 +++++++++++++++++++
> drivers/platform/x86/Kconfig | 11 +
> drivers/platform/x86/thinkpad_acpi.c | 376 ++++++++++++++++++++++++++++++++
> include/linux/thinkpad_acpi.h | 16 ++
> 5 files changed, 646 insertions(+)
>
> diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
> index 00b6dfe..9aca62d 100644
> --- a/Documentation/laptops/thinkpad-acpi.txt
> +++ b/Documentation/laptops/thinkpad-acpi.txt
> @@ -46,6 +46,7 @@ detailed description):
> - Fan control and monitoring: fan speed, fan enable/disable
> - WAN enable and disable
> - UWB enable and disable
> + - Battery Wear Control (BWC)
>
> A compatibility table by model and feature is maintained on the web
> site, http://ibm-acpi.sf.net/. I appreciate any success or failure
> @@ -1376,6 +1377,21 @@ For more details about which buttons will appear depending on the mode, please
> review the laptop's user guide:
> http://www.lenovo.com/shop/americas/content/user_guides/x1carbon_2_ug_en.pdf
>
> +Battey Wear Control (BWC)
> +-------------------------
> +
> +The driver supports control for the embedded controller ACPI battery configuration.
> +This means that you can set start and stop charge thresholds for batteries in
> +ThinkPads that have a processor newer than Sandy Bridge.
> +
> +The actual sysfs interface is an extension of the standard ACPI battery interface.
> +The interface is usually in:
> +
> +Start thresholds: /sys/class/power_supply/BATN/charge_start_threshold
> +Stop threshold: /sys/class/power_supply/BATN/charge_stop_threshold
> +
> +These attributes support reading and writing.
> +
> Multiple Commands, Module Parameters
> ------------------------------------
>
> diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
> index 13e7b56..4852a76 100644
> --- a/drivers/acpi/battery.c
> +++ b/drivers/acpi/battery.c
> @@ -41,6 +41,7 @@
>
> #include <linux/acpi.h>
> #include <linux/power_supply.h>
> +#include <linux/thinkpad_acpi.h>
>
> #include "battery.h"
>
> @@ -70,6 +71,7 @@ static async_cookie_t async_cookie;
> static bool battery_driver_registered;
> static int battery_bix_broken_package;
> static int battery_notification_delay_ms;
> +static int has_thinkpad_extension = 0;
> static unsigned int cache_time = 1000;
> module_param(cache_time, uint, 0644);
> MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
> @@ -626,6 +628,189 @@ static const struct device_attribute alarm_attr = {
> .store = acpi_battery_alarm_store,
> };
>
> +/* --------------------------------------------------------------------------
> + ThinkPad Battery Wear Control ACPI Extension
> + -------------------------------------------------------------------------- */
> +
> +#ifdef CONFIG_THINKPAD_ACPI_BWC
Not really.
This is generic code, so no thinkpad_acpi-specific stuff in this file, please,
even under #ifdefs.
> +
> +/*
> + * Because the thinkpad_acpi module usually is loaded right after
> + * the disk is mounted, we will lazy-load it on demand when any of the
> + * sysfs methods is read or written if it is not loaded.
> + */
> +static int thinkpad_acpi_lazyload(void)
> +{
> + void* func;
> +
> + func = symbol_get(tpacpi_battery_get_functionality);
> +
> + if (func) {
> + // thinkpad_acpi is loaded
Please clean up these comments (they should be in C format and formatted
as described in the coding style doc).
> + return 0;
> + }
Thanks,
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
