The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan management with temperature and remote voltage sensing. Various fan control features are provided, including PWM frequency control, temperature hysteresis, dual tachometer measurements, and fan health monitoring. This patch presents a basic driver using only the existing features of the PMBus subsystem. Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx> --- Documentation/hwmon/max31785 | 51 ++++++++++++++++++ drivers/hwmon/pmbus/Kconfig | 10 ++++ drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/max31785.c | 116 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 178 insertions(+) create mode 100644 Documentation/hwmon/max31785 create mode 100644 drivers/hwmon/pmbus/max31785.c diff --git a/Documentation/hwmon/max31785 b/Documentation/hwmon/max31785 new file mode 100644 index 000000000000..45fb6093dec2 --- /dev/null +++ b/Documentation/hwmon/max31785 @@ -0,0 +1,51 @@ +Kernel driver max31785 +====================== + +Supported chips: + * Maxim MAX31785, MAX31785A + Prefix: 'max31785' or 'max31785a' + Addresses scanned: - + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf + +Author: Andrew Jeffery <andrew@xxxxxxxx> + +Description +----------- + +The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan +management with temperature and remote voltage sensing. Various fan control +features are provided, including PWM frequency control, temperature hysteresis, +dual tachometer measurements, and fan health monitoring. + +For dual rotor fan configuration, the MAX31785 exposes the slowest rotor of the +two in the fan[1-4]_input attributes. + +Usage Notes +----------- + +This driver does not probe for PMBus devices. You will have to instantiate +devices explicitly. + +Sysfs attributes +---------------- + +fan[1-4]_alarm Fan alarm. +fan[1-4]_fault Fan fault. +fan[1-4]_input Fan RPM. + +in[1-6]_crit Critical maximum output voltage +in[1-6]_crit_alarm Output voltage critical high alarm +in[1-6]_input Measured output voltage +in[1-6]_label "vout[18-23]" +in[1-6]_lcrit Critical minimum output voltage +in[1-6]_lcrit_alarm Output voltage critical low alarm +in[1-6]_max Maximum output voltage +in[1-6]_max_alarm Output voltage high alarm +in[1-6]_min Minimum output voltage +in[1-6]_min_alarm Output voltage low alarm + +temp[1-11]_crit Critical high temperature +temp[1-11]_crit_alarm Chip temperature critical high alarm +temp[1-11]_input Measured temperature +temp[1-11]_max Maximum temperature +temp[1-11]_max_alarm Chip temperature high alarm diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 40019325b517..08479006c7f9 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -114,6 +114,16 @@ config SENSORS_MAX20751 This driver can also be built as a module. If so, the module will be called max20751. +config SENSORS_MAX31785 + tristate "Maxim MAX31785 and compatibles" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX31785. + + This driver can also be built as a module. If so, the module will + be called max31785. + config SENSORS_MAX34440 tristate "Maxim MAX34440 and compatibles" default n diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 459a6be3390e..a8bf0e490db9 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o obj-$(CONFIG_SENSORS_MAX16064) += max16064.o obj-$(CONFIG_SENSORS_MAX20751) += max20751.o +obj-$(CONFIG_SENSORS_MAX31785) += max31785.o obj-$(CONFIG_SENSORS_MAX34440) += max34440.o obj-$(CONFIG_SENSORS_MAX8688) += max8688.o obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o diff --git a/drivers/hwmon/pmbus/max31785.c b/drivers/hwmon/pmbus/max31785.c new file mode 100644 index 000000000000..9313849d5160 --- /dev/null +++ b/drivers/hwmon/pmbus/max31785.c @@ -0,0 +1,116 @@ +/* + * Copyright (C) 2017 IBM Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include "pmbus.h" + +enum max31785_regs { + MFR_REVISION = 0x9b, +}; + +#define MAX31785_NR_PAGES 23 + +#define MAX31785_FAN_FUNCS \ + (PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12) + +#define MAX31785_TEMP_FUNCS \ + (PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP) + +#define MAX31785_VOUT_FUNCS \ + (PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT) + +static const struct pmbus_driver_info max31785_info = { + .pages = MAX31785_NR_PAGES, + + /* RPM */ + .format[PSC_FAN] = direct, + .m[PSC_FAN] = 1, + .b[PSC_FAN] = 0, + .R[PSC_FAN] = 0, + .func[0] = MAX31785_FAN_FUNCS, + .func[1] = MAX31785_FAN_FUNCS, + .func[2] = MAX31785_FAN_FUNCS, + .func[3] = MAX31785_FAN_FUNCS, + .func[4] = MAX31785_FAN_FUNCS, + .func[5] = MAX31785_FAN_FUNCS, + + .format[PSC_TEMPERATURE] = direct, + .m[PSC_TEMPERATURE] = 1, + .b[PSC_TEMPERATURE] = 0, + .R[PSC_TEMPERATURE] = 2, + .func[6] = MAX31785_TEMP_FUNCS, + .func[7] = MAX31785_TEMP_FUNCS, + .func[8] = MAX31785_TEMP_FUNCS, + .func[9] = MAX31785_TEMP_FUNCS, + .func[10] = MAX31785_TEMP_FUNCS, + .func[11] = MAX31785_TEMP_FUNCS, + .func[12] = MAX31785_TEMP_FUNCS, + .func[13] = MAX31785_TEMP_FUNCS, + .func[14] = MAX31785_TEMP_FUNCS, + .func[15] = MAX31785_TEMP_FUNCS, + .func[16] = MAX31785_TEMP_FUNCS, + + .format[PSC_VOLTAGE_OUT] = direct, + .m[PSC_VOLTAGE_OUT] = 1, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = 0, + .func[17] = MAX31785_VOUT_FUNCS, + .func[18] = MAX31785_VOUT_FUNCS, + .func[19] = MAX31785_VOUT_FUNCS, + .func[20] = MAX31785_VOUT_FUNCS, + .func[21] = MAX31785_VOUT_FUNCS, + .func[22] = MAX31785_VOUT_FUNCS, +}; + +static int max31785_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct pmbus_driver_info *info; + s64 ret; + + info = devm_kzalloc(dev, sizeof(struct pmbus_driver_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + *info = max31785_info; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 255); + if (ret < 0) + return ret; + + return pmbus_do_probe(client, id, info); +} + +static const struct i2c_device_id max31785_id[] = { + { "max31785", 0 }, + { "max31785a", 0 }, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, max31785_id); + +static struct i2c_driver max31785_driver = { + .driver = { + .name = "max31785", + }, + .probe = max31785_probe, + .remove = pmbus_do_remove, + .id_table = max31785_id, +}; + +module_i2c_driver(max31785_driver); + +MODULE_AUTHOR("Andrew Jeffery <andrew@xxxxxxxx>"); +MODULE_DESCRIPTION("PMBus driver for the Maxim MAX31785"); +MODULE_LICENSE("GPL"); -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
