Convert V4L2_SUBDEV_IO_PIN_* to enums, use BIT() and document
via kernel-doc.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
include/media/v4l2-subdev.h | 33 +++++++++++++++++++++------------
1 file changed, 21 insertions(+), 12 deletions(-)
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index c43e3d650fe6..249604bbd3cb 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -109,22 +109,31 @@ struct v4l2_decode_vbi_line {
* not yet implemented) since ops provide proper type-checking.
*/
-/* Subdevice external IO pin configuration */
-#define V4L2_SUBDEV_IO_PIN_DISABLE (1 << 0) /* ENABLE assumed */
-#define V4L2_SUBDEV_IO_PIN_OUTPUT (1 << 1)
-#define V4L2_SUBDEV_IO_PIN_INPUT (1 << 2)
-#define V4L2_SUBDEV_IO_PIN_SET_VALUE (1 << 3) /* Set output value */
-#define V4L2_SUBDEV_IO_PIN_ACTIVE_LOW (1 << 4) /* ACTIVE HIGH assumed */
+/**
+ * enum v4l2_subdev_io_pin_flags - Subdevice external IO pin configuration
+ * flags
+ *
+ * @V4L2_SUBDEV_IO_PIN_DISABLE: disables a pin config. ENABLE assumed.
+ * @V4L2_SUBDEV_IO_PIN_OUTPUT: set it if pin is an output.
+ * @V4L2_SUBDEV_IO_PIN_INPUT: set it if pin is an input.
+ * @V4L2_SUBDEV_IO_PIN_SET_VALUE: to set the output value via
+ * &struct v4l2_subdev_io_pin_config->value.
+ * @V4L2_SUBDEV_IO_PIN_ACTIVE_LOW: pin active is bit 0.
+ * Otherwise, ACTIVE HIGH is assumed.
+ */
+enum v4l2_subdev_io_pin_flags {
+ V4L2_SUBDEV_IO_PIN_DISABLE = BIT(0),
+ V4L2_SUBDEV_IO_PIN_OUTPUT = BIT(1),
+ V4L2_SUBDEV_IO_PIN_INPUT = BIT(2),
+ V4L2_SUBDEV_IO_PIN_SET_VALUE = BIT(3),
+ V4L2_SUBDEV_IO_PIN_ACTIVE_LOW = BIT(4),
+};
/**
* struct v4l2_subdev_io_pin_config - Subdevice external IO pin configuration
*
- * @flags: bitmask with flags for this pin's config:
- * %V4L2_SUBDEV_IO_PIN_DISABLE - disables a pin config,
- * %V4L2_SUBDEV_IO_PIN_OUTPUT - if pin is an output,
- * %V4L2_SUBDEV_IO_PIN_INPUT - if pin is an input,
- * %V4L2_SUBDEV_IO_PIN_SET_VALUE - to set the output value via @value
- * and %V4L2_SUBDEV_IO_PIN_ACTIVE_LOW - if active is 0.
+ * @flags: bitmask with flags for this pin's config, as defined by
+ * &enum v4l2_subdev_io_pin_flags.
* @pin: Chip external IO pin to configure
* @function: Internal signal pad/function to route to IO pin
* @value: Initial value for pin - e.g. GPIO output value
--
2.13.6
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
