This enum is already documented, but it is not using a kernel-doc
format. Convert its format, in order to produce documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
include/media/cec-pin.h | 81 +++++++++++++++++++++++++++++++------------------
1 file changed, 52 insertions(+), 29 deletions(-)
diff --git a/include/media/cec-pin.h b/include/media/cec-pin.h
index f09cc9579d53..fbe8c256820e 100644
--- a/include/media/cec-pin.h
+++ b/include/media/cec-pin.h
@@ -24,65 +24,88 @@
#include <linux/atomic.h>
#include <media/cec.h>
+/**
+ * enum cec_pin_state - state of CEC pins
+ * @CEC_ST_OFF:
+ * CEC is off
+ * @CEC_ST_IDLE:
+ * CEC is idle, waiting for Rx or Tx
+ * @CEC_ST_TX_WAIT:
+ * Pending Tx, waiting for Signal Free Time to expire
+ * @CEC_ST_TX_WAIT_FOR_HIGH:
+ * Low-drive was detected, wait for bus to go high
+ * @CEC_ST_TX_START_BIT_LOW:
+ * Drive CEC low for the start bit
+ * @CEC_ST_TX_START_BIT_HIGH:
+ * Drive CEC high for the start bit
+ * @CEC_ST_TX_DATA_BIT_0_LOW:
+ * Drive CEC low for the 0 bit
+ * @CEC_ST_TX_DATA_BIT_0_HIGH:
+ * Drive CEC high for the 0 bit
+ * @CEC_ST_TX_DATA_BIT_1_LOW:
+ * Drive CEC low for the 1 bit
+ * @CEC_ST_TX_DATA_BIT_1_HIGH:
+ * Drive CEC high for the 1 bit
+ * @CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE:
+ * Wait for start of sample time to check for Ack bit or first
+ * four initiator bits to check for Arbitration Lost.
+ * @CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE:
+ * Wait for end of bit period after sampling
+ * @CEC_ST_RX_START_BIT_LOW:
+ * Start bit low detected
+ * @CEC_ST_RX_START_BIT_HIGH:
+ * Start bit high detected
+ * @CEC_ST_RX_DATA_SAMPLE:
+ * Wait for bit sample time
+ * @CEC_ST_RX_DATA_POST_SAMPLE:
+ * Wait for earliest end of bit period after sampling
+ * @CEC_ST_RX_DATA_HIGH:
+ * Wait for CEC to go high (i.e. end of bit period
+ * @CEC_ST_RX_ACK_LOW:
+ * Drive CEC low to send 0 Ack bit
+ * @CEC_ST_RX_ACK_LOW_POST:
+ * End of 0 Ack time, wait for earliest end of bit period
+ * @CEC_ST_RX_ACK_HIGH_POST:
+ * Wait for CEC to go high (i.e. end of bit period
+ * @CEC_ST_RX_ACK_FINISH:
+ * Wait for earliest end of bit period and end of message
+ * @CEC_ST_LOW_DRIVE:
+ * Start low drive
+ * @CEC_ST_RX_IRQ:
+ * Monitor pin using interrupts
+ * @CEC_PIN_STATES:
+ * Total number of pin states
+ */
enum cec_pin_state {
- /* CEC is off */
CEC_ST_OFF,
- /* CEC is idle, waiting for Rx or Tx */
CEC_ST_IDLE,
/* Tx states */
-
- /* Pending Tx, waiting for Signal Free Time to expire */
CEC_ST_TX_WAIT,
- /* Low-drive was detected, wait for bus to go high */
CEC_ST_TX_WAIT_FOR_HIGH,
- /* Drive CEC low for the start bit */
CEC_ST_TX_START_BIT_LOW,
- /* Drive CEC high for the start bit */
CEC_ST_TX_START_BIT_HIGH,
- /* Drive CEC low for the 0 bit */
CEC_ST_TX_DATA_BIT_0_LOW,
- /* Drive CEC high for the 0 bit */
CEC_ST_TX_DATA_BIT_0_HIGH,
- /* Drive CEC low for the 1 bit */
CEC_ST_TX_DATA_BIT_1_LOW,
- /* Drive CEC high for the 1 bit */
CEC_ST_TX_DATA_BIT_1_HIGH,
- /*
- * Wait for start of sample time to check for Ack bit or first
- * four initiator bits to check for Arbitration Lost.
- */
CEC_ST_TX_DATA_BIT_1_HIGH_PRE_SAMPLE,
- /* Wait for end of bit period after sampling */
CEC_ST_TX_DATA_BIT_1_HIGH_POST_SAMPLE,
/* Rx states */
-
- /* Start bit low detected */
CEC_ST_RX_START_BIT_LOW,
- /* Start bit high detected */
CEC_ST_RX_START_BIT_HIGH,
- /* Wait for bit sample time */
CEC_ST_RX_DATA_SAMPLE,
- /* Wait for earliest end of bit period after sampling */
CEC_ST_RX_DATA_POST_SAMPLE,
- /* Wait for CEC to go high (i.e. end of bit period */
CEC_ST_RX_DATA_HIGH,
- /* Drive CEC low to send 0 Ack bit */
CEC_ST_RX_ACK_LOW,
- /* End of 0 Ack time, wait for earliest end of bit period */
CEC_ST_RX_ACK_LOW_POST,
- /* Wait for CEC to go high (i.e. end of bit period */
CEC_ST_RX_ACK_HIGH_POST,
- /* Wait for earliest end of bit period and end of message */
CEC_ST_RX_ACK_FINISH,
- /* Start low drive */
CEC_ST_LOW_DRIVE,
- /* Monitor pin using interrupts */
CEC_ST_RX_IRQ,
- /* Total number of pin states */
CEC_PIN_STATES
};
--
2.13.5
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
