On Tue, Aug 29, 2017 at 02:21:16PM -0700, Xo Wang wrote:
> When converting the DIRECT format CURRENT_IN and POWER commands, make
> the offset coefficient ("b") predicate on the value of the current limit
> setting.
>
> Signed-off-by: Xo Wang <xow@xxxxxxxxxx>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> drivers/hwmon/pmbus/lm25066.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c
> index a3d912cd3b8d..232b4af13e12 100644
> --- a/drivers/hwmon/pmbus/lm25066.c
> +++ b/drivers/hwmon/pmbus/lm25066.c
> @@ -488,16 +488,18 @@ static int lm25066_probe(struct i2c_client *client,
> info->m[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].m;
> info->b[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].b;
> info->R[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].R;
> - info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].b;
> info->R[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].R;
> - info->b[PSC_POWER] = coeff[PSC_POWER].b;
> info->R[PSC_POWER] = coeff[PSC_POWER].R;
> if (config & LM25066_DEV_SETUP_CL) {
> info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].m;
> + info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].b;
> info->m[PSC_POWER] = coeff[PSC_POWER_L].m;
> + info->b[PSC_POWER] = coeff[PSC_POWER_L].b;
> } else {
> info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].m;
> + info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].b;
> info->m[PSC_POWER] = coeff[PSC_POWER].m;
> + info->b[PSC_POWER] = coeff[PSC_POWER].b;
> }
>
> return pmbus_do_probe(client, id, info);
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
