On Fri, Aug 11, 2017 at 09:30:59AM -0500, Eddie James wrote:
>
>
> On 08/10/2017 08:18 PM, Guenter Roeck wrote:
> >On Thu, Aug 10, 2017 at 05:19:45PM -0500, Eddie James wrote:
> >>From: "Edward A. James" <eajames@xxxxxxxxxx>
> >>
> >>Add the driver to monitor POWER system power supplies with hwmon over
> >>pmbus.
> >>
> >>Signed-off-by: Edward A. James <eajames@xxxxxxxxxx>
> >>---
> >> drivers/hwmon/pmbus/Kconfig | 10 +++
> >> drivers/hwmon/pmbus/Makefile | 1 +
> >> drivers/hwmon/pmbus/powerps.c | 144 ++++++++++++++++++++++++++++++++++++++++++
> >> 3 files changed, 155 insertions(+)
> >> create mode 100644 drivers/hwmon/pmbus/powerps.c
> >>
> >>diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> >>index 68d717a..8925c1a 100644
> >>--- a/drivers/hwmon/pmbus/Kconfig
> >>+++ b/drivers/hwmon/pmbus/Kconfig
> >>@@ -125,6 +125,16 @@ config SENSORS_MAX8688
> >> This driver can also be built as a module. If so, the module will
> >> be called max8688.
> >>+config SENSORS_POWERPS
> >>+ tristate "IBM POWER System Power Supply"
> >>+ default n
> >>+ help
> >>+ If you say yes here you get hardware monitoring support for the IBM
> >>+ POWER system power supply.
> >>+
> >>+ This driver can also be built as a module. If so, the module will
> >>+ be called powerps.
> >>+
> >> config SENSORS_TPS40422
> >> tristate "TI TPS40422"
> >> default n
> >>diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> >>index 75bb7ca..3303af5 100644
> >>--- a/drivers/hwmon/pmbus/Makefile
> >>+++ b/drivers/hwmon/pmbus/Makefile
> >>@@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_MAX16064) += max16064.o
> >> obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
> >> obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
> >> obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
> >>+obj-$(CONFIG_SENSORS_POWERPS) += powerps.o
> >> obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
> >> obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
> >> obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
> >>diff --git a/drivers/hwmon/pmbus/powerps.c b/drivers/hwmon/pmbus/powerps.c
> >>new file mode 100644
> >>index 0000000..21d28f2
> >>--- /dev/null
> >>+++ b/drivers/hwmon/pmbus/powerps.c
> >>@@ -0,0 +1,144 @@
> >>+/*
> >>+ * Copyright 2017 IBM Corp.
> >>+ *
> >>+ * This program is free software; you can redistribute it and/or modify
> >>+ * it under the terms of the GNU General Public License as published by
> >>+ * the Free Software Foundation; either version 2 of the License, or
> >>+ * (at your option) any later version.
> >>+ */
> >>+
> >>+#include <linux/device.h>
> >>+#include <linux/i2c.h>
> >>+#include <linux/jiffies.h>
> >>+#include <linux/module.h>
> >>+
> >>+#include "pmbus.h"
> >>+
> >>+/* STATUS_MFR_SPECIFIC bits */
> >>+#define POWERPS_MFR_FAN_FAULT BIT(0)
> >>+#define POWERPS_MFR_THERMAL_FAULT BIT(1)
> >>+#define POWERPS_MFR_OV_FAULT BIT(2)
> >>+#define POWERPS_MFR_UV_FAULT BIT(3)
> >>+#define POWERPS_MFR_PS_KILL BIT(4)
> >>+#define POWERPS_MFR_OC_FAULT BIT(5)
> >>+#define POWERPS_MFR_VAUX_FAULT BIT(6)
> >>+#define POWERPS_MFR_CURRENT_SHARE_WARNING BIT(7)
> >>+
> >>+static int powerps_read_byte_data(struct i2c_client *client, int page, int reg)
> >>+{
> >>+ int rc, mfr;
> >>+
> >>+ switch (reg) {
> >>+ case PMBUS_STATUS_VOUT:
> >>+ case PMBUS_STATUS_IOUT:
> >>+ case PMBUS_STATUS_TEMPERATURE:
> >>+ case PMBUS_STATUS_FAN_12:
> >>+ rc = pmbus_read_byte_data(client, page, reg);
> >>+ if (rc < 0)
> >>+ return rc;
> >>+
> >>+ mfr = pmbus_read_byte_data(client, page,
> >>+ PMBUS_STATUS_MFR_SPECIFIC);
> >>+ if (mfr < 0)
> >>+ return rc;
> > return mfr; ?
>
> Well I returned rc because we read the status register without error, so
> just return the status register contents without the additional mfr bits.
> It's not very clear... I better add a comment.
>
Ah, yes, that makes sense. Agreed, please add a comment.
> >
> >>+
> >>+ /* Add MFR_SPECIFIC bits to the standard pmbus status regs. */
> >>+ if (reg == PMBUS_STATUS_FAN_12) {
> >>+ if (mfr & POWERPS_MFR_FAN_FAULT)
> >>+ rc |= PB_FAN_FAN1_FAULT;
> >>+ } else if (reg == PMBUS_STATUS_TEMPERATURE) {
> >>+ if (mfr & POWERPS_MFR_THERMAL_FAULT)
> >>+ rc |= PB_TEMP_OT_FAULT;
> >>+ } else if (reg == PMBUS_STATUS_VOUT) {
> >>+ if (mfr &
> >>+ (POWERPS_MFR_OV_FAULT | POWERPS_MFR_VAUX_FAULT))
> >Wondering - this suggests that there is a VAUX. Would it make sense
> >to map it to PMBUS_VIRT_READ_VMON ?
>
> There is no VAUX for this device. The power supply spec calls it "12Vaux
> Fault" but I don't know why.
>
power supply designers having some fun ;-)
Guenter
> Thanks for the quick review!
> Eddie
>
> >
> >>+ rc |= PB_VOLTAGE_OV_FAULT;
> >>+ if (mfr & POWERPS_MFR_UV_FAULT)
> >>+ rc |= PB_VOLTAGE_UV_FAULT;
> >>+ } else if (reg == PMBUS_STATUS_IOUT) {
> >>+ if (mfr & POWERPS_MFR_OC_FAULT)
> >>+ rc |= PB_IOUT_OC_FAULT;
> >>+ if (mfr & POWERPS_MFR_CURRENT_SHARE_WARNING)
> >>+ rc |= PB_CURRENT_SHARE_FAULT;
> >>+ }
> >>+ break;
> >>+ default:
> >>+ rc = -ENODATA;
> >>+ break;
> >>+ }
> >>+
> >>+ return rc;
> >>+}
> >>+
> >>+static int powerps_read_word_data(struct i2c_client *client, int page, int reg)
> >>+{
> >>+ int rc, mfr;
> >>+
> >>+ switch (reg) {
> >>+ case PMBUS_STATUS_WORD:
> >>+ rc = pmbus_read_word_data(client, page, reg);
> >>+ if (rc < 0)
> >>+ return rc;
> >>+
> >>+ mfr = pmbus_read_byte_data(client, page,
> >>+ PMBUS_STATUS_MFR_SPECIFIC);
> >>+ if (mfr < 0)
> >>+ return rc;
> > return mfr; ?
> >
> >>+
> >>+ if (mfr & POWERPS_MFR_PS_KILL)
> >>+ rc |= PB_STATUS_OFF;
> >>+ break;
> >>+ default:
> >>+ rc = -ENODATA;
> >>+ break;
> >>+ }
> >>+
> >>+ return rc;
> >>+}
> >>+
> >>+static struct pmbus_driver_info powerps_info = {
> >>+ .pages = 1,
> >>+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
> >>+ PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP |
> >>+ PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
> >>+ PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
> >>+ PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
> >>+ .read_byte_data = powerps_read_byte_data,
> >>+ .read_word_data = powerps_read_word_data,
> >>+ .debugfs = true,
> >>+};
> >>+
> >>+static int powerps_probe(struct i2c_client *client,
> >>+ const struct i2c_device_id *id)
> >>+{
> >>+ return pmbus_do_probe(client, id, &powerps_info);
> >>+}
> >>+
> >>+static const struct i2c_device_id powerps_id[] = {
> >>+ { "power_ps", 1 },
> >>+ {}
> >>+};
> >>+MODULE_DEVICE_TABLE(i2c, powerps_id);
> >>+
> >>+/* IBM provides many compatible power supplies; use a generic name. */
> >>+static const struct of_device_id powerps_of_match[] = {
> >>+ { .compatible = "ibm,power-ps" },
> >>+ {}
> >>+};
> >>+MODULE_DEVICE_TABLE(of, powerps_of_match);
> >>+
> >>+static struct i2c_driver powerps_driver = {
> >>+ .driver = {
> >>+ .name = "powerps",
> >>+ .of_match_table = powerps_of_match,
> >>+ },
> >>+ .probe = powerps_probe,
> >>+ .remove = pmbus_do_remove,
> >>+ .id_table = powerps_id,
> >>+};
> >>+
> >>+module_i2c_driver(powerps_driver);
> >>+
> >>+MODULE_AUTHOR("Eddie James");
> >>+MODULE_DESCRIPTION("PMBus driver for POWER system power supplies");
> >>+MODULE_LICENSE("GPL");
> >>--
> >>1.8.3.1
> >>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
