On Fri, Aug 04, 2017 at 06:18:52PM -0700, Brendan Higgins wrote:
> Added device tree binding documentation for ipmi-bt-i2c (host) and
> ipmi-bmc-bt-i2c (BMC) and documentation for the Block Transfer over I2C
> (bt-i2c) protocol.
Please split the bindings to a separate patch.
>
> Signed-off-by: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
> ---
> Changes for v2:
> - Fixed a typo
> - Reworded a sentence to make it clear that I was talking about IBM's BT-BMC
> - Deleted an unnecessary discussion of the host side interface (unnecessary
> since the OpenIPMI stuff already has its own documentation).
> ---
> Documentation/bt-i2c.txt | 109 +++++++++++++++++++++
> .../devicetree/bindings/ipmi/ipmi-bt-i2c.txt | 21 ++++
> .../bindings/ipmi_bmc/ipmi-bmc-bt-i2c.txt | 21 ++++
> 3 files changed, 151 insertions(+)
> create mode 100644 Documentation/bt-i2c.txt
> create mode 100644 Documentation/devicetree/bindings/ipmi/ipmi-bt-i2c.txt
> create mode 100644 Documentation/devicetree/bindings/ipmi_bmc/ipmi-bmc-bt-i2c.txt
> diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-bt-i2c.txt b/Documentation/devicetree/bindings/ipmi/ipmi-bt-i2c.txt
> new file mode 100644
> index 000000000000..bd956f2805e4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ipmi/ipmi-bt-i2c.txt
> @@ -0,0 +1,21 @@
> +Device tree configuration for the ipmi-bt-i2c driver.
> +
> +Required Properties:
> +- compatible : should be "ipmi-bt-i2c"
> +- reg : the I2C slave address of the ipmi-bmc-bt-i2c
> +
> +i2c0: i2c-bus@40 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x40 0x40>;
> + compatible = "aspeed,ast2400-i2c-bus";
This is the host side, right? So this should be something besides an
ASpeed I2C controller.
> + clock-frequency = <100000>;
> + status = "disabled";
Don't should status in examples.
> + interrupts = <0>;
> + interrupt-parent = <&i2c>;
> +
> + bt-i2c-master@41 {
But it's the slave device you are describing here, right? The host is
the master. Just "ipmi-bt" is probably enough.
> + compatible = "ipmi-bt-i2c";
> + reg = <0x41>;
> + };
> +};
> diff --git a/Documentation/devicetree/bindings/ipmi_bmc/ipmi-bmc-bt-i2c.txt b/Documentation/devicetree/bindings/ipmi_bmc/ipmi-bmc-bt-i2c.txt
> new file mode 100644
> index 000000000000..6e82693ee50e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ipmi_bmc/ipmi-bmc-bt-i2c.txt
> @@ -0,0 +1,21 @@
> +Device tree configuration for the ipmi-bmc-bt-i2c driver.
> +
> +Required Properties:
> +- compatible : should be "ipmi-bmc-bt-i2c"
> +- reg : the I2C slave address of this driver.
> +
> +i2c0: i2c-bus@40 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x40 0x40>;
> + compatible = "aspeed,ast2400-i2c-bus";
> + clock-frequency = <100000>;
> + status = "disabled";
> + interrupts = <0>;
> + interrupt-parent = <&i2c>;
> +
> + bt-i2c-slave@41 {
> + compatible = "ipmi-bmc-bt-i2c";
> + reg = <0x41>;
This doesn't follow the slave binding which sets bit 30 for slave
devices.
> + };
> +};
> --
> 2.14.0.rc1.383.gd1ce394fe2-goog
>
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
