Re: [RFC PATCH 3/3] hwmon: (adt7475) temperature smoothing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 02, 2017 at 05:45:36PM +1200, Chris Packham wrote:
> When enabled temperature smoothing allows ramping the fan speed over a
> configurable period of time instead of jumping to the new speed
> instantaneously.
> 
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
>  Documentation/hwmon/adt7475 |   5 ++
>  drivers/hwmon/adt7475.c     | 121 ++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 126 insertions(+)
> 
> diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
> index 85dc9e17bdee..31b15cb910ea 100644
> --- a/Documentation/hwmon/adt7475
> +++ b/Documentation/hwmon/adt7475
> @@ -114,6 +114,11 @@ at the minimum (i.e. auto_point1_pwm). This can be configured using the
>  pwm[1-*]_min sysfs attribute. A value of 0 means the fans will shut off. A
>  value of 1 means the fans will run at auto_point1_pwm.
>  
> +The responsiveness of the ADT747x to temperature changes can be configured.
> +This allows smoothing of the fan speed transition. To enable temperature
> +smoothing used the temp[1-*]_smoothing_enable sysfs attribute. To set the
> +transition time set the value in ms in the temp[1-*]_smoothing sysfs attribute.
> +
Does this require two attributes, or can setting '0' for temp[1-*]_smoothing
be used to disable it ?

Thanks,
Guenter

>  Notes
>  -----
>  
> diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
> index 53f25bda0919..e1299eef7c51 100644
> --- a/drivers/hwmon/adt7475.c
> +++ b/drivers/hwmon/adt7475.c
> @@ -526,6 +526,109 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
>  	return count;
>  }
>  
> +/* Assuming CONFIG6[SLOW] is 0 */
> +static const int ad7475_st_map[] = {
> +	37500, 18800, 12500, 7500, 4700, 3100, 1600, 800,
> +};
> +
> +static ssize_t show_temp_st(struct device *dev, struct device_attribute *attr,
> +				  char *buf)
> +{
> +	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct adt7475_data *data = i2c_get_clientdata(client);
> +	int shift, idx;
> +	long val;
> +
> +	switch (sattr->index) {
> +	case 0:
> +		shift = 0;
> +		idx = 0;
> +		break;
> +	case 1:
> +		shift = 4;
> +		idx = 1;
> +		break;
> +	case 2:
> +		shift = 0;
> +		idx = 1;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	switch (sattr->nr) {
> +	case CONTROL:
> +		val = (data->enh_acou[idx] >> shift) & 0x8;
> +		return sprintf(buf, "%d\n", !!val);
> +	case MIN:
> +		val = (data->enh_acou[idx] >> shift) & 0x7;
> +		return sprintf(buf, "%d\n", ad7475_st_map[val]);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static ssize_t set_temp_st(struct device *dev, struct device_attribute *attr,
> +				 const char *buf, size_t count)
> +{
> +	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct adt7475_data *data = i2c_get_clientdata(client);
> +	unsigned char reg;
> +	int shift, idx;
> +	int mask;
> +	long val;
> +
> +	if (kstrtol(buf, 10, &val))
> +		return -EINVAL;
> +
> +	switch (sattr->index) {
> +	case 0:
> +		reg = REG_ENHANCE_ACOUSTICS1;
> +		shift = 0;
> +		idx = 0;
> +		break;
> +	case 1:
> +		reg = REG_ENHANCE_ACOUSTICS2;
> +		shift = 4;
> +		idx = 1;
> +		break;
> +	case 2:
> +		reg = REG_ENHANCE_ACOUSTICS2;
> +		shift = 0;
> +		idx = 1;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	switch (sattr->nr) {
> +	case CONTROL:
> +		val = !!val << 3;
> +		mask = 0x8;
> +		break;
> +	case MIN:
> +		val = find_closest_descending(val, ad7475_st_map,
> +					      ARRAY_SIZE(ad7475_st_map));
> +		mask = 0x7;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	mutex_lock(&data->lock);
> +
> +	data->enh_acou[idx] &= ~(mask << shift);
> +	data->enh_acou[idx] |= (val << shift);
> +
> +	i2c_smbus_write_byte_data(client, reg, data->enh_acou[idx]);
> +
> +	mutex_unlock(&data->lock);
> +
> +	return count;
> +}
> +
>  /*
>   * Table of autorange values - the user will write the value in millidegrees,
>   * and we'll convert it
> @@ -1008,6 +1111,10 @@ static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
>  			    THERM, 0);
>  static SENSOR_DEVICE_ATTR_2(temp1_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
>  			    set_temp, HYSTERSIS, 0);
> +static SENSOR_DEVICE_ATTR_2(temp1_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
> +			    set_temp_st, MIN, 0);
> +static SENSOR_DEVICE_ATTR_2(temp1_smoothing_enable, S_IRUGO | S_IWUSR,
> +			    show_temp_st, set_temp_st, CONTROL, 0);
>  static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, INPUT, 1);
>  static SENSOR_DEVICE_ATTR_2(temp2_alarm, S_IRUGO, show_temp, NULL, ALARM, 1);
>  static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
> @@ -1024,6 +1131,10 @@ static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
>  			    THERM, 1);
>  static SENSOR_DEVICE_ATTR_2(temp2_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
>  			    set_temp, HYSTERSIS, 1);
> +static SENSOR_DEVICE_ATTR_2(temp2_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
> +			    set_temp_st, MIN, 1);
> +static SENSOR_DEVICE_ATTR_2(temp2_smoothing_enable, S_IRUGO | S_IWUSR,
> +			    show_temp_st, set_temp_st, CONTROL, 1);
>  static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, INPUT, 2);
>  static SENSOR_DEVICE_ATTR_2(temp3_alarm, S_IRUGO, show_temp, NULL, ALARM, 2);
>  static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_temp, NULL, FAULT, 2);
> @@ -1041,6 +1152,10 @@ static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
>  			    THERM, 2);
>  static SENSOR_DEVICE_ATTR_2(temp3_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
>  			    set_temp, HYSTERSIS, 2);
> +static SENSOR_DEVICE_ATTR_2(temp3_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
> +			    set_temp_st, MIN, 2);
> +static SENSOR_DEVICE_ATTR_2(temp3_smoothing_enable, S_IRUGO | S_IWUSR,
> +			    show_temp_st, set_temp_st, CONTROL, 2);
>  static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_tach, NULL, INPUT, 0);
>  static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
>  			    MIN, 0);
> @@ -1125,6 +1240,8 @@ static struct attribute *adt7475_attrs[] = {
>  	&sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
>  	&sensor_dev_attr_temp1_crit.dev_attr.attr,
>  	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
> +	&sensor_dev_attr_temp1_smoothing.dev_attr.attr,
> +	&sensor_dev_attr_temp1_smoothing_enable.dev_attr.attr,
>  	&sensor_dev_attr_temp2_input.dev_attr.attr,
>  	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
>  	&sensor_dev_attr_temp2_max.dev_attr.attr,
> @@ -1134,6 +1251,8 @@ static struct attribute *adt7475_attrs[] = {
>  	&sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
>  	&sensor_dev_attr_temp2_crit.dev_attr.attr,
>  	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
> +	&sensor_dev_attr_temp2_smoothing.dev_attr.attr,
> +	&sensor_dev_attr_temp2_smoothing_enable.dev_attr.attr,
>  	&sensor_dev_attr_temp3_input.dev_attr.attr,
>  	&sensor_dev_attr_temp3_fault.dev_attr.attr,
>  	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
> @@ -1144,6 +1263,8 @@ static struct attribute *adt7475_attrs[] = {
>  	&sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
>  	&sensor_dev_attr_temp3_crit.dev_attr.attr,
>  	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
> +	&sensor_dev_attr_temp3_smoothing.dev_attr.attr,
> +	&sensor_dev_attr_temp3_smoothing_enable.dev_attr.attr,
>  	&sensor_dev_attr_fan1_input.dev_attr.attr,
>  	&sensor_dev_attr_fan1_min.dev_attr.attr,
>  	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
> -- 
> 2.11.0.24.ge6920cf
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux