Right now, all devices use bus 0 for eeprom. However, newer
versions of Terratec H6 use a different buffer for eeprom.
So, add support to use a different I2C address for eeprom.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
drivers/media/usb/em28xx/em28xx-cards.c | 1 +
drivers/media/usb/em28xx/em28xx-i2c.c | 5 +----
drivers/media/usb/em28xx/em28xx.h | 4 +++-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index a12b599a1fa2..c7754303e88e 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -2669,6 +2669,7 @@ static inline void em28xx_set_model(struct em28xx *dev)
/* Should be initialized early, for I2C to work */
dev->def_i2c_bus = dev->board.def_i2c_bus;
+ dev->eeprom_i2c_bus = dev->board.eeprom_i2c_bus;
}
/* Wait until AC97_RESET reports the expected value reliably before proceeding.
diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c
index 8c472d5adb50..df0ab4b6f18f 100644
--- a/drivers/media/usb/em28xx/em28xx-i2c.c
+++ b/drivers/media/usb/em28xx/em28xx-i2c.c
@@ -665,8 +665,6 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
*eedata = NULL;
*eedata_len = 0;
- /* EEPROM is always on i2c bus 0 on all known devices. */
-
dev->i2c_client[bus].addr = 0xa0 >> 1;
/* Check if board has eeprom */
@@ -975,8 +973,7 @@ int em28xx_i2c_register(struct em28xx *dev, unsigned bus,
dev->i2c_client[bus] = em28xx_client_template;
dev->i2c_client[bus].adapter = &dev->i2c_adap[bus];
- /* Up to now, all eeproms are at bus 0 */
- if (!bus) {
+ if (bus == dev->eeprom_i2c_bus) {
retval = em28xx_i2c_eeprom(dev, bus, &dev->eedata, &dev->eedata_len);
if ((retval < 0) && (retval != -ENODEV)) {
dev_err(&dev->intf->dev,
diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
index e8d97d5ec161..8117536343ab 100644
--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -440,7 +440,8 @@ struct em28xx_board {
int vchannels;
int tuner_type;
int tuner_addr;
- unsigned def_i2c_bus; /* Default I2C bus */
+ unsigned def_i2c_bus; /* Default I2C bus */
+ unsigned eeprom_i2c_bus; /* EEPROM I2C bus */
/* i2c flags */
unsigned int tda9887_conf;
@@ -643,6 +644,7 @@ struct em28xx {
unsigned char eeprom_addrwidth_16bit:1;
unsigned def_i2c_bus; /* Default I2C bus */
+ unsigned eeprom_i2c_bus;/* EEPROM I2C bus */
unsigned cur_i2c_bus; /* Current I2C bus */
struct rt_mutex i2c_bus_lock;
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
