Consolidate use instructions and userspace API notes into the same chapter;
remove completely obsolete references, move into a separate subdirectory.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
Documentation/input/index.rst | 6 +-
Documentation/input/joydev/index.rst | 18 +++++
Documentation/input/{ => joydev}/joystick-api.rst | 30 ++++++--
Documentation/input/{ => joydev}/joystick.rst | 88 ++++++-----------------
Documentation/input/joystick-parport.rst | 12 ++--
5 files changed, 71 insertions(+), 83 deletions(-)
create mode 100644 Documentation/input/joydev/index.rst
rename Documentation/input/{ => joydev}/joystick-api.rst (89%)
rename Documentation/input/{ => joydev}/joystick.rst (86%)
diff --git a/Documentation/input/index.rst b/Documentation/input/index.rst
index 5887c79173b8..b25a67198a65 100644
--- a/Documentation/input/index.rst
+++ b/Documentation/input/index.rst
@@ -2,8 +2,7 @@
The Linux Input Documentation
=============================
-Core API
-========
+Contents:
.. toctree::
:maxdepth: 2
@@ -12,8 +11,7 @@ Core API
input
input-programming
event-codes
- joystick
- joystick-api
+ joydev/index
multi-touch-protocol
gamepad
gameport-programming
diff --git a/Documentation/input/joydev/index.rst b/Documentation/input/joydev/index.rst
new file mode 100644
index 000000000000..8d9666c7561c
--- /dev/null
+++ b/Documentation/input/joydev/index.rst
@@ -0,0 +1,18 @@
+.. include:: <isonum.txt>
+
+======================
+Linux Joystick support
+======================
+
+:Copyright: |copy| 1996-2000 Vojtech Pavlik <vojtech@xxxxxx> - Sponsored by SuSE
+
+.. class:: toc-title
+
+ Table of Contents
+
+.. toctree::
+ :maxdepth: 3
+ :numbered:
+
+ joystick
+ joystick-api
diff --git a/Documentation/input/joystick-api.rst b/Documentation/input/joydev/joystick-api.rst
similarity index 89%
rename from Documentation/input/joystick-api.rst
rename to Documentation/input/joydev/joystick-api.rst
index 9b9d26833086..42edcfc6e8af 100644
--- a/Documentation/input/joystick-api.rst
+++ b/Documentation/input/joydev/joystick-api.rst
@@ -1,16 +1,36 @@
-==========================
-Joystick API Documentation
-==========================
+=====================
+Programming Interface
+=====================
:Author: Ragnar Hojland Espinosa <ragnar@xxxxxxxxxx> - 7 Aug 1998
+Introduction
+============
+
+.. important::
+ This document describes legacy ``js`` interface. Newer clients are
+ encouraged to switch to the generic event (``evdev``) interface.
+
+The 1.0 driver uses a new, event based approach to the joystick driver.
+Instead of the user program polling for the joystick values, the joystick
+driver now reports only any changes of its state. See joystick-api.txt,
+joystick.h and jstest.c included in the joystick package for more
+information. The joystick device can be used in either blocking or
+nonblocking mode, and supports select() calls.
+
+For backward compatibility the old (v0.x) interface is still included.
+Any call to the joystick driver using the old interface will return values
+that are compatible to the old interface. This interface is still limited
+to 2 axes, and applications using it usually decode only 2 buttons, although
+the driver provides up to 32.
+
Initialization
==============
Open the joystick device following the usual semantics (that is, with open).
Since the driver now reports events instead of polling for changes,
immediately after the open it will issue a series of synthetic events
-(JS_EVENT_INIT) that you can read to check the initial state of the
+(JS_EVENT_INIT) that you can read to obtain the initial state of the
joystick.
By default, the device is opened in blocking mode::
@@ -182,7 +202,7 @@ the actual state of the joystick.
.. note::
- As for version 1.2.8, the queue is circular and able to hold 64
+ As of version 1.2.8, the queue is circular and able to hold 64
events. You can increment this size bumping up JS_BUFF_SIZE in
joystick.h and recompiling the driver.
diff --git a/Documentation/input/joystick.rst b/Documentation/input/joydev/joystick.rst
similarity index 86%
rename from Documentation/input/joystick.rst
rename to Documentation/input/joydev/joystick.rst
index c9c175ffc2ff..b90705eb69b1 100644
--- a/Documentation/input/joystick.rst
+++ b/Documentation/input/joydev/joystick.rst
@@ -1,56 +1,17 @@
.. include:: <isonum.txt>
-============================
-Linux Joystick driver v2.0.0
-============================
-
-:Copyright: |copy| 1996-2000 Vojtech Pavlik <vojtech@xxxxxx> - Sponsored by SuSE
-
-
-Disclaimer
-==========
-
-This program is free software; you can redistribute it and/or modify it
-under the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2 of the License, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-more details.
-
-You should have received a copy of the GNU General Public License along
-with this program; if not, write to the Free Software Foundation, Inc., 59
-Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-Should you need to contact me, the author, you can do so either by e-mail
-- mail your message to <vojtech@xxxxxx>, or by paper mail: Vojtech Pavlik,
-Simunkova 1594, Prague 8, 182 00 Czech Republic
-
-For your convenience, the GNU General Public License version 2 is included
-in the package: See the file COPYING.
-
-Intro
-=====
+Introduction
+============
The joystick driver for Linux provides support for a variety of joysticks
and similar devices. It is based on a larger project aiming to support all
input devices in Linux.
-Should you encounter any problems while using the driver, or joysticks
-this driver can't make complete use of, I'm very interested in hearing about
-them. Bug reports and success stories are also welcome.
-
-The input project website is at:
-
- http://atrey.karlin.mff.cuni.cz/~vojtech/input/
-
-There is also a mailing list for the driver at:
+The mailing list for the project is:
- listproc@xxxxxxxxxxxxxxxxxxxxxxxx
+ linux-input@xxxxxxxxxxxxxxx
-send "subscribe linux-joystick Your Name" to subscribe to it.
+send "subscribe linux-input" to majordomo@xxxxxxxxxxxxxxx to subscribe to it.
Usage
=====
@@ -58,18 +19,22 @@ Usage
For basic usage you just choose the right options in kernel config and
you should be set.
-inpututils
-----------
+Utilities
+---------
-For testing and other purposes (for example serial devices), a set of
-utilities is available at the abovementioned website. I suggest you download
-and install it before going on.
+For testing and other purposes (for example serial devices), there is a set
+of utilities, such as ``jstest``, ``jscal``, and ``evtest``,
+usually packaged as ``joystick``, ``input-utils``, ``evtest``, and so on.
+
+``inputattach`` utility is required if your joystick is connected to a
+serial port.
Device nodes
------------
-For applications to be able to use the joysticks,
-you'll have to manually create these nodes in /dev::
+For applications to be able to use the joysticks, device nodes should be
+created in /dev. Normally it is done automatically by the system, but
+it can also be done by hand::
cd /dev
rm js*
@@ -166,7 +131,6 @@ And add a line to your rc script executing that file::
This way, after the next reboot your joystick will remain calibrated. You
can also add the ``jscal -p`` line to your shutdown script.
-
HW specific driver information
==============================
@@ -467,6 +431,10 @@ future if I get an Amiga in the reach of my fingers.
Game console and 8-bit pads and joysticks
-----------------------------------------
+These pads and joysticks are not designed for PCs and other computers
+Linux runs on, and usually require a special connector for attaching
+them through a parallel port.
+
See :ref:`joystick-parport` for more info.
SpaceTec/LabTec devices
@@ -613,19 +581,3 @@ FAQ
:Q: My joystick doesn't work with Quake / Quake 2. What's the cause?
:A: Quake / Quake 2 don't support joystick. Use joy2key to simulate keypresses
for them.
-
-Programming Interface
-=====================
-
-The 1.0 driver uses a new, event based approach to the joystick driver.
-Instead of the user program polling for the joystick values, the joystick
-driver now reports only any changes of its state. See joystick-api.txt,
-joystick.h and jstest.c included in the joystick package for more
-information. The joystick device can be used in either blocking or
-nonblocking mode and supports select() calls.
-
-For backward compatibility the old (v0.x) interface is still included.
-Any call to the joystick driver using the old interface will return values
-that are compatible to the old interface. This interface is still limited
-to 2 axes, and applications using it usually decode only 2 buttons, although
-the driver provides up to 32.
diff --git a/Documentation/input/joystick-parport.rst b/Documentation/input/joystick-parport.rst
index fa8cab584793..cc2ab871e701 100644
--- a/Documentation/input/joystick-parport.rst
+++ b/Documentation/input/joystick-parport.rst
@@ -2,9 +2,9 @@
.. _joystick-parport:
-===================================
-Linux Joystick parport drivers v2.0
-===================================
+==============================
+Parallel port Joystick Drivers
+==============================
:Copyright: |copy| 1998-2000 Vojtech Pavlik <vojtech@xxxxxx>
:Copyright: |copy| 1998 Andree Borrmann <a.borrmann@xxxxxxxx>
@@ -20,8 +20,8 @@ it will be true. So, use it at your own risk. The possible damages that can
happen include burning your parallel port, and/or the sticks and joystick
and maybe even more. Like when a lightning kills you it is not our problem.
-Intro
-=====
+Introduction
+============
The joystick parport drivers are used for joysticks and gamepads not
originally designed for PCs and other computers Linux runs on. Because of
@@ -582,7 +582,7 @@ use turbografx.map2 and turbografx.map3 as additional command line parameters
for two more interfaces.
PC parallel port pinout
------------------------
+=======================
::
--
2.12.2.762.g0e3151a226-goog
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
