Re: [PATCH v4 3/5] input: add a EV_SW event for ratchet switch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Apr 11 2017 or thereabouts, Mauro Carvalho Chehab wrote:
> Some mice have a switch on their wheel, allowing to switch
> between ratchet and free wheel mode. Add support for it.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
> ---

Patches 1 to 3 are:
Acked-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>

Cheers,
Benjamin

>  Documentation/input/event-codes.txt    | 12 ++++++++++++
>  include/linux/mod_devicetable.h        |  2 +-
>  include/uapi/linux/input-event-codes.h |  4 +++-
>  3 files changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt
> index 50352ab5f6d4..5dbd45db9bf6 100644
> --- a/Documentation/input/event-codes.txt
> +++ b/Documentation/input/event-codes.txt
> @@ -206,6 +206,18 @@ Upon resume, if the switch state is the same as before suspend, then the input
>  subsystem will filter out the duplicate switch state reports. The driver does
>  not need to keep the state of the switch at any time.
>  
> +A few EV_SW codes have special meanings:
> +
> +* SW_RATCHET:
> +
> +  - Some mice have a special switch for their wheel that allows to change
> +    between free wheel mode and ratchet mode. When the switch is ratchet
> +    mode (ON state), the wheel will offer some resistance for movements. It
> +    may also provide a tactile feedback when scrolled.
> +
> +    Note that some mice have a ratchet switch that does not generate a
> +    software event.
> +
>  EV_MSC:
>  ----------
>  EV_MSC events are used for input and output events that do not fall under other
> diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
> index a3e8c572a046..79dd7dbf5442 100644
> --- a/include/linux/mod_devicetable.h
> +++ b/include/linux/mod_devicetable.h
> @@ -292,7 +292,7 @@ struct pcmcia_device_id {
>  #define INPUT_DEVICE_ID_LED_MAX		0x0f
>  #define INPUT_DEVICE_ID_SND_MAX		0x07
>  #define INPUT_DEVICE_ID_FF_MAX		0x7f
> -#define INPUT_DEVICE_ID_SW_MAX		0x0f
> +#define INPUT_DEVICE_ID_SW_MAX		0x1f
>  
>  #define INPUT_DEVICE_ID_MATCH_BUS	1
>  #define INPUT_DEVICE_ID_MATCH_VENDOR	2
> diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
> index da48d4079511..da83e231e93d 100644
> --- a/include/uapi/linux/input-event-codes.h
> +++ b/include/uapi/linux/input-event-codes.h
> @@ -789,7 +789,9 @@
>  #define SW_LINEIN_INSERT	0x0d  /* set = inserted */
>  #define SW_MUTE_DEVICE		0x0e  /* set = device disabled */
>  #define SW_PEN_INSERTED		0x0f  /* set = pen inserted */
> -#define SW_MAX			0x0f
> +#define SW_RATCHET		0x10  /* set = ratchet mode,
> +					 unset: free wheel */
> +#define SW_MAX			0x1f
>  #define SW_CNT			(SW_MAX+1)
>  
>  /*
> -- 
> 2.9.3
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux