Hi,
On 03/31/2017 07:55 PM, Neil Armstrong wrote:
The Amlogic GX SoCs implements a Synopsys DesignWare HDMI TX Controller
in combination with a very custom PHY.
Thanks to Laurent Pinchart's changes, the HW report the following :
Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
The following differs from common PHY integration as managed in the current
driver :
- Amlogic PHY is not configured through the internal I2C link
- Amlogic PHY do not use the ENTMDS, SVSRET, PDDQ, ... signals from the controller
- Amlogic PHY do not export HPD ands RxSense signals to the controller
And finally, concerning the controller integration :
- the Controller registers are not flat memory-mapped, and uses an
addr+read/write register pair to write all registers.
- Inputs only YUV444 pixel data
Most of these uses case are implemented in Laurent Pinchart v5.1 patchset merged
in drm-misc-next branch.
This is why the following patchset implements :
- Configure the Input format from the plat_data
- Add PHY callback to handle HPD and RxSense out of the dw-hdmi driver
To implement the input format handling, the Synopsys HDMIT TX Controller input
V4L bus formats are used and missing formats + documentation are added.
This patchset makes the Amlogic GX SoCs HDMI output successfully work, and is
also tested on the RK3288 ACT8846 EVB Board.
Please feel free to add my Reviewed-by for all the patches.
Did we get an Ack from the v4l maintainers to take the media
changes via the drm-misc branch? If so, I guess we could go ahead
and push the series to drm-misc-next.
Thanks,
Archit
Changes since v5 at [6] :
- Small addition in V4L YUV bus formats documentation
Changes since v4 at [5] :
- Rebased on drm-misc-next at bd283d2f66c2
- Fix 4:2:0 bus formats naming
- Renamed function fd_registered to i2c_init in dw-hdmi.c
Changes since v3 at [4] :
- Fix 4:2:0 bus formats naming
- Add separate 36bit and 48bit tables for bus formats documentation
- Added 4:2:0 bus config in hdmi_video_sample
- Moved dw_hdmi documentation in a "bridge" subdir
- Rebase on drm-misc-next at 62c58af32c93
Changes since v2 at [3] :
- Rebase on laurent patch "Extract PHY interrupt setup to a function"
- Reduce phy operations
- Switch the V4L bus formats and encodings instead of custom enum
Changes since v1 at [2] :
- Drop patches submitted by laurent
Changes since RFC at [1] :
- Regmap fixup for 4bytes register access, tested on RK3288 SoC
- Move phy callbacks to phy_ops and move Synopsys PHY calls into default ops
- Move HDMI link data into shared header
- Move Pixel Encoding enum to shared header
[1] http://lkml.kernel.org/r/1484656294-6140-1-git-send-email-narmstrong@xxxxxxxxxxxx
[2] http://lkml.kernel.org/r/1485774318-21916-1-git-send-email-narmstrong@xxxxxxxxxxxx
[3] http://lkml.kernel.org/r/1488468572-31971-1-git-send-email-narmstrong@xxxxxxxxxxxx
[4] http://lkml.kernel.org/r/1488904944-14285-1-git-send-email-narmstrong@xxxxxxxxxxxx
[5] http://lkml.kernel.org/r/1490109161-20529-1-git-send-email-narmstrong@xxxxxxxxxxxx
[6] http://lkml.kernel.org/r/1490864675-17336-1-git-send-email-narmstrong@xxxxxxxxxxxx
Laurent Pinchart (1):
drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function
Neil Armstrong (5):
media: uapi: Add RGB and YUV bus formats for Synopsys HDMI TX
Controller
documentation: media: Add documentation for new RGB and YUV bus
formats
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings
drm: bridge: dw-hdmi: Add Documentation on supported input formats
drm: bridge: dw-hdmi: Move HPD handling to PHY operations
Documentation/gpu/bridge/dw-hdmi.rst | 15 +
Documentation/gpu/index.rst | 1 +
Documentation/media/uapi/v4l/subdev-formats.rst | 874 +++++++++++++++++++++++-
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 470 ++++++++-----
include/drm/bridge/dw_hdmi.h | 68 ++
include/uapi/linux/media-bus-format.h | 13 +-
6 files changed, 1268 insertions(+), 173 deletions(-)
create mode 100644 Documentation/gpu/bridge/dw-hdmi.rst
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
