Hi Mark,
On Tue, Mar 14, 2017 at 12:57 PM, Mark Rutland <mark.rutland@xxxxxxx> wrote:
> On Tue, Mar 14, 2017 at 11:06:52AM -0700, Hoan Tran wrote:
>> This patch adds support for SoC-wide (AKA uncore) Performance Monitoring
>> Unit in the next generation of X-Gene SoC.
>>
>> Signed-off-by: Hoan Tran <hotran@xxxxxxx>
>> ---
>> drivers/perf/xgene_pmu.c | 645 ++++++++++++++++++++++++++++++++++++++++++-----
>> 1 file changed, 575 insertions(+), 70 deletions(-)
>
> That's a very large number of additions, and a very short commit
> message.
>
> Please expand the commit message, outlining the differences in this new
> version of the PMU HW, and the structural changes made to the driver to
> accommodate this.
>
> Additionally, I think that this amount of change should be split into
> separate patches. More on that below.
>
> [...]
>
>> static inline void xgene_pmu_mask_int(struct xgene_pmu *xgene_pmu)
>> {
>> - writel(PCPPMU_INTENMASK, xgene_pmu->pcppmu_csr + PCPPMU_INTMASK_REG);
>> + if (xgene_pmu->version == PCP_PMU_V3) {
>> + writel(PCPPMU_V3_INTENMASK,
>> + xgene_pmu->pcppmu_csr + PCPPMU_INTMASK_REG);
>> + } else {
>> + writel(PCPPMU_INTENMASK,
>> + xgene_pmu->pcppmu_csr + PCPPMU_INTMASK_REG);
>> + }
>> }
>
> Having all these version checks in the leaf functions is horrible,
> especially given that in cases like xgene_pmu_read_counter(), the v3
> behaviour is *substantially* different to the v1/v2 behaviour.
>
> Please use function pointers in the xgene_pmu/xgene_pmu_dev structures
> instead. That way you can clearly separate the v3 code and the v1/v2
> code, and only need to distinguish the two at init time.
>
> Please move the existing code over to function pointers with preparatory
> patches, with the v3 code introduced afterwards.
>
> That applies to almost all cases where you check xgene_pmu->version,
> excluding those that happen during probing.
>
>> -static inline u32 xgene_pmu_read_counter(struct xgene_pmu_dev *pmu_dev, int idx)
>> +static inline u64 xgene_pmu_read_counter(struct xgene_pmu_dev *pmu_dev, int idx)
>> {
>> - return readl(pmu_dev->inf->csr + PMU_PMEVCNTR0 + (4 * idx));
>> + u32 cnt_lo, cnt_hi, cnt_hi2;
>> +
>> + if (pmu_dev->parent->version == PCP_PMU_V3) {
>> + /*
>> + * v3 has 64-bit counter registers composed by 2 32-bit registers
>> + * This can be a problem if the counter increases and carries
>> + * out of bit [31] between 2 reads. The extra reads would help
>> + * to prevent this issue.
>> + */
>> + while (1) {
>> + cnt_hi = readl(pmu_dev->inf->csr + PMU_PMEVCNTR0 + 4 + (8 * idx));
>> + cnt_lo = readl(pmu_dev->inf->csr + PMU_PMEVCNTR0 + (8 * idx));
>> + cnt_hi2 = readl(pmu_dev->inf->csr + PMU_PMEVCNTR0 + 4 + (8 * idx));
>> + if (cnt_hi == cnt_hi2)
>> + return (((u64)cnt_hi << 32) | cnt_lo);
>> + }
>> + }
>> +
>> + return ((u64)readl(pmu_dev->inf->csr + PMU_PMEVCNTR0 + (4 * idx)));
>> }
>
> It would be far simpler and easier to follow, if we did something like:
>
> static inline u64 xgene_pmu_read_counter32(struct xgene_pmu_dev *pmu_dev, int idx)
> {
> return readl(pmu_dev->inf->csr + PMU_PMEVCNTR0 + (4 * idx));
> }
>
> static inline u64 xgene_pmu_read_counter64(struct xgene_pmu_dev *pmu_dev, int idx)
> {
> u32 lo, hi;
>
> do {
> hi = xgene_pmu_read_counter32(dev, 2 * idx);
> lo = xgene_pmu_read_counter32(dev, 2 * idx + 1);
> } while (hi = xgene_pmu_read_counter32(dev, 2 * idx));
>
> return ((u64)hi << 32) | lo;
> }
>
> ... with the prototypes the same, we can assign the pointer to the
> relevant pmu structure.
>
> [...]
>
>> @@ -595,7 +1008,7 @@ static void xgene_perf_event_set_period(struct perf_event *event)
>> struct xgene_pmu_dev *pmu_dev = to_pmu_dev(event->pmu);
>> struct hw_perf_event *hw = &event->hw;
>> /*
>> - * The X-Gene PMU counters have a period of 2^32. To account for the
>> + * The X-Gene PMU counters have a period of 2^32 or more. To account for the
>> * possiblity of extreme interrupt latency we program for a period of
>> * half that. Hopefully we can handle the interrupt before another 2^31
>> * events occur and the counter overtakes its previous value.
>> @@ -603,7 +1016,7 @@ static void xgene_perf_event_set_period(struct perf_event *event)
>> u64 val = 1ULL << 31;
>>
>> local64_set(&hw->prev_count, val);
>> - xgene_pmu_write_counter(pmu_dev, hw->idx, (u32) val);
>> + xgene_pmu_write_counter(pmu_dev, hw->idx, val);
>> }
>
> Surely we should update the val to give us a 2^63 default period, then?
>
> AFAICT, we still set it to 1ULL << 31 above.
This is the start value for the counter to prevent the overflow
occurs, it's not the maximum period.
>
>> @@ -758,20 +1174,48 @@ static int xgene_init_perf(struct xgene_pmu_dev *pmu_dev, char *name)
>>
>> switch (pmu->inf->type) {
>> case PMU_TYPE_L3C:
>> - pmu->attr_groups = l3c_pmu_attr_groups;
>> + if (!(xgene_pmu->l3c_active_mask & pmu->inf->enable_mask))
>> + goto dev_err;
>> + if (xgene_pmu->version == PCP_PMU_V3) {
>> + pmu->attr_groups = l3c_pmu_v3_attr_groups;
>> + pmu->default_agentid = PCPPMU_V3_L3C_DEFAULT_AGENTID;
>
> As with my comment on the documentation patch, I don't see why this
> needs to differ from the v1/v2 cases.
>
> [...]
>
>> + if (xgene_pmu->version == PCP_PMU_V3) {
>> + mcb0routing = CSW_CSWCR_MCB0_ROUTING(reg);
>> + mcb1routing = CSW_CSWCR_MCB0_ROUTING(reg);
>> + if (reg & CSW_CSWCR_DUALMCB_MASK) {
>> + xgene_pmu->mcb_active_mask = 0x3;
>> + xgene_pmu->l3c_active_mask = 0xFF;
>> + if ((mcb0routing == 0x2) && (mcb1routing == 0x2))
>> + xgene_pmu->mc_active_mask = 0xFF;
>> + else if ((mcb0routing == 0x1) && (mcb1routing == 0x1))
>> + xgene_pmu->mc_active_mask = 0x33;
>> + else
>> + xgene_pmu->mc_active_mask = 0x11;
>> +
>> + } else {
>> + xgene_pmu->mcb_active_mask = 0x1;
>> + xgene_pmu->l3c_active_mask = 0x0F;
>> + if ((mcb0routing == 0x2) && (mcb1routing == 0x0))
>> + xgene_pmu->mc_active_mask = 0x0F;
>> + else if ((mcb0routing == 0x1) && (mcb1routing == 0x0))
>> + xgene_pmu->mc_active_mask = 0x03;
>> + else
>> + xgene_pmu->mc_active_mask = 0x01;
>> + }
>
> I have no idea what's going on here, especially given the amount of
> magic numbers.
>
> Comments would be helpful here.
>
> [...]
>
>> @@ -1059,13 +1551,19 @@ static acpi_status acpi_pmu_dev_add(acpi_handle handle, u32 level,
>> if (acpi_bus_get_status(adev) || !adev->status.present)
>> return AE_OK;
>>
>> - if (!strcmp(acpi_device_hid(adev), "APMC0D5D"))
>> + if ((!strcmp(acpi_device_hid(adev), "APMC0D5D")) ||
>> + (!strcmp(acpi_device_hid(adev), "APMC0D84")))
>> ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, PMU_TYPE_L3C);
>> - else if (!strcmp(acpi_device_hid(adev), "APMC0D5E"))
>> + else if ((!strcmp(acpi_device_hid(adev), "APMC0D5E")) ||
>> + (!strcmp(acpi_device_hid(adev), "APMC0D85")))
>> ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, PMU_TYPE_IOB);
>> - else if (!strcmp(acpi_device_hid(adev), "APMC0D5F"))
>> + else if (!strcmp(acpi_device_hid(adev), "APMC0D86"))
>> + ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, PMU_TYPE_IOB_SLOW);
>> + else if ((!strcmp(acpi_device_hid(adev), "APMC0D5F")) ||
>> + (!strcmp(acpi_device_hid(adev), "APMC0D87")))
>> ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, PMU_TYPE_MCB);
>> - else if (!strcmp(acpi_device_hid(adev), "APMC0D60"))
>> + else if ((!strcmp(acpi_device_hid(adev), "APMC0D60")) ||
>> + (!strcmp(acpi_device_hid(adev), "APMC0D88")))
>> ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, PMU_TYPE_MC);
>
> This is now illegible. Please make these table-driven, or use helper
> functions. e.g. something like:
>
> static const struct acpi_device_id xgene_pmu_dev_type_match[] = {
> { "APMC0D5D", PMU_TYPE_L3C },
> { "APMC0D84", PMU_TYPE_L3C },
> { "APMC0D5E", PMU_TYPE_IOB },
> { "APMC0D85", PMU_TYPE_IOB },
> ...
> };
>
> static acpi_status acpi_pmu_dev_add(...)
> {
> ...
> id = acpi_match_device(xgene_pmu_dev_type_match, adev->dev)
> if (!id)
> return AE_OK;
>
> ctx = acpi_get_pmu_hw_inf(xgene_pmu, adev, (int)id->driver_data);
> ...
> }
Yes, I can create a static function to parse the PMU type from the match table.
>
>> @@ -1245,6 +1749,7 @@ static int xgene_pmu_probe_pmu_dev(struct xgene_pmu *xgene_pmu,
>> static const struct acpi_device_id xgene_pmu_acpi_match[] = {
>> {"APMC0D5B", PCP_PMU_V1},
>> {"APMC0D5C", PCP_PMU_V2},
>> + {"APMC0D83", PCP_PMU_V3},
>> {},
>> };
>
> No "apm,xgene-pmu-v3" DT update?
Yes, we don't support DT for X-Gene 3.
Thank you for your comments!
Regards
Hoan
>
> Thanks,
> Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
